サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HGD 251デジタルMGコアレスヘリサーボ - 24.4グラム/ .12s / 5.6キロ

Generating Links

HGD 251デジタルMGコアレスヘリサーボ - 24.4グラム/ .12s / 5.6キロ

価格:

Now save 節約 ¥0.00 ¥0.00

¥6,267.74
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
HG-D251MG
送料無料したい? クリックする こちらへ 詳細情報を参照する

HGDデジタルCarboniteのサーボ24.4グラム
韓国製、サーボのHG範囲は優れた品質、精度と信頼性を提供します。
高精度、デジタル精度と長寿命が、この3Dヘリパイロットのための優れた選択肢となっています。

特徴;
デジタル精密
高速
メタルギア。
ボールベアリングサポート
ヘリコプターのアプリケーションに最適です。
合金のヒートシンクは、ポテンショメータ、モータの冷却を可能にします。

スペック。
電源 :4.8V〜6.0V
スピード :0.15s / 60 0.12s / 60 BR>?
トルク :4.8Kg.cm、5.6Kg.cm
サイズ :30.0 X 13.0 X 33.3
重量 :24.4グラム


  • Servo トルク(キログラム) (分0.01キロ) 5.60
  • Servo スピード(秒/ 60deg ) 0.12
  • Servo A( MM ) 38.00
  • Servo B ( mm)と 30.00
  • Servo C ( mm)と 34.00
  • Servo D ( mm)と 14.00
  • Servo E ( mm)と 41.00
  • Servo F ( mm)と 22.00
attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

顧客 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2010

Habe diese Servos ber FlashSale gnstig bekommen.

Fr diesen Preis absolut i.O.

Nutze diese im HK500

xero | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2010

perfec un servo muy bueno!! lo llevo en un 450 pro con giro futaba 401

lastima q es un poco peque y lo puse al tubo pero sino le dava un 12

pizzaschnitzer | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 29, 2010

too cool. bouht in the 4h sale for just 14,99$. this servos are awesome! yesterday mounted on swashplate from MSH Protos. its needed to modifie the holes from 4mm to 4,5mm with a reamer, then good fitting, no play and verry strong composite arms included. good look&feel. each servo in an exclusive box with all additionals like arms, screws and so on.

Whitebear | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 16, 2010

Realy a good servo for this price... I just complain : the deadband is too high!

顧客 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2010

Very good servo, except one thing: The gears have too much slop. More slop than HGD 250 and HGD 260.

Rotorbird | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2010

(review cont) With this said, I expect a servo sold as one rated for "helicopter use" to have a deadband no greater than 2uS, preferably 1uS or less. Cost has no bearing on this specification, it's a parameter set at the factory or via a programmer usually available to the consumer. (Hyperion and Hitec digital servos are easily adjusted this way) I should rate these servos 3 or less but the overall high quality deserved a 4-stars rating.

Rotorbird | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2010

(review cont) Since the servo motion is split between two functions, the servo travel is halved for each function. This cuts effective servo resolution in half. If the deadband is taken into consideration here, using half servo travel for, say, collective, means the effective deadband is doubled, to 10-12uS. That's a bunch of 'electronic free-play' introduced into the control system and you WILL feel the lack of control precision. More to follow.

Rotorbird | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2010

(review cont.) I will say the gear train is decent, servo amp responds cleanly and gear backlash is acceptable but I do have one major complaint: The deadband on all ten servos was 5-6uS, 5X greater than acceptable for a modern, "heli-rated", digital servo. All of today's heli's in the size range intended for this type servo uses eCCPM for swash and rotorhead control. This means the servos do double functions (cyclic and collective) each. (more)

Rotorbird | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2010

I've been hearing good things about Ino-Lab servos for the last two-or-so years but never was motivated to buy any until I saw the super sale offered a couple weeks ago. The specs sounded perfect for outfitting some '500' class e-heli's waiting for assembly. Purchased 10, cheap considering the price. Received them a couple days ago and gave each servo a preliminary break-in test and to see how smooth and consistent they ran. More to follow...

Warlee | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 01, 2010

Have bought 3 pcs. according to Reviews they seemed to be very good servo's. As soon as I got them, 1 pc was dead on arrival?? If INO-lab servo's are that good, why don't they test the servo's before they ship them?

I will send back 1 servo for replacement. Down goos the bargain.

  1. 1
  2. 2
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!