サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HK-450 PROフライバーレスDFCローターヘッドアセンブリ

Generating Links

HK-450 PROフライバーレスDFCローターヘッドアセンブリ

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,986.95
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
155000122
送料無料したい? クリックする こちらへ 詳細情報を参照する

このほか、機械加工フライバーレスDFC(ダイレクトフライトコントロール)ローターヘッドは、高品質のラジアル軸受、スラスト軸受を利用し、美しい黒/シルバー仕上げに陽極酸化されます。これは、ヘビーデューティ4ミリメートルのフェザリングシャフトを備え、HK-450 /トレックス450ヘリコプターと互換性があります。

これは、斜板と主軸それボルトオンアップグレードDFCのフライバーレスにヘリあなたの450サイズを変換するための作り、ブレードグリップ/ワットメインローターヘッドを含む完全なヘッドアセンブリです!

  • DFC 450 FLYBARLESS Roto Head
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

sdyste | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 20, 2016

I would like to give this 5 stars but there does not seem to be any QA inspections before these go out my first had a bent main shaft and the main rotor was not straight the second had another bent main shaft, Slapped on a authentic Align shaft and it works great. My advise just order 2 along with some real Main shafts from another site and cross your fingers

motorrc | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 05, 2016

just did a few easy hovers and the dfc links are bent already-this is because they have to pull the inner swash around as well as controlling pitch-poor design, avoid

vlaporte | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 09, 2015

This is a nice DFC head for my HK450 pro but you will good servos - I used TGY 212MG for cyclic and tail and Robird FBL unit with good performance.
My problem now - I cannot find replacement feathering shafts - unusual size - 54mm long 4mm diameter.
HK450 pro are 51mm long and Align are 51 mm long.
HELP!
Vince

chumby | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2015

this is a very good product with no binding at all any were just as good if not better than original t-rex

LasseK | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 13, 2015

The feathering shaft is too short so when tightening up the feathering shaft screws, I nipped the thrust bearings and damaged them. So had to change them and used an original Align feathering shaft from a 450 Pro, which fixed that problem. Some screws / ball links had threadlock, others not. Some screws / ball links were tightened, others not. So I advice you to: TAKE APART AND CHECK EVERYTHING! Had some trouble with binding after tightening up everything, but ran the head in a drill for 20 minutes with the swash tilted to exercise all links and bearings, and this made it usable. Have only test hovered so far, worked very stable with a 3GX FBL control unit. It's really pointless of HK to deliver this kind of products without proper threadlock and tightening, would be much better to just get all the parts in a bag (maybe it would even be cheaper that way). Recommend this head only for non-beginners that are curious about DFC, because the quality is quite sketchy. Minus point also for the separate retainer ring on the main shaft instead of a main shaft with a proper fixed ridge (Align).

alexgarc | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 01, 2014

Excelente upgrade para mi 450, buena calidad, solida y muy bonito acabado.



Excellent upgrade for my 450, good quality, solid and very nice finish.

experto | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 02, 2014

Have received my 2nd DFC assembly but with this one I noticed bindings on feathering shaft and on 1 control arm.
Disassembled the head and found bearings were assembled the wrong way. After correcting and lubing it was perfect as the first one I received some weeks earlier.
Control arm had little thread lock on one bearing. I have carefully removed it and with little lube it was also perfect.
Usually I check the parts and add my own thread lock and lube to be sure. That is why I do not care much about the wrong assembled bearings and give another 5 crown rating.

experto | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2014

Excellent quality for a good price.
Perfect alignment, tight but no binding and came with strong dampers. Did not see any problem as others had before. 3x5 crowns product

Geir Nordb | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 23, 2014

Very happy with it, works perfect on my HK450GT..
Great quality of the head. Easy to adjust the pitch..

Only bad thing to say from my side is that one of the link arm from swash plate was to short so i needed to replace it. My friend also ordered this one and his was perfect right away.. But no big deal, i just replaced the link with longer arm..

All in all very happy with it :)

whiskykid | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 27, 2014

only 4 crowns cause I have not flown it yet! came in a plane plastic bag, but boxed well!
so far just popped the ball links off servo's, and unscrewed main gear, pulled FB'd set-out, and dropped in the HK FBL head combo!
and pooped on the link's on exsisting ball links on servo's, seemed ok so far!
went too loc-tite everything, and was unable too remove any screws, "I mean any" so these units must be well loc-tited at the factory now!
will be using one of the VBAR clones, set-up went pretty smooth, now just waiting for life too settle back down and no rain!
P.s. there is zero slop in this head! I high hopes for this set-up!

  1. 1
  2. 2
  3. 3
  4. 4
顧客ファイル
The head Download [178]
The head 2 Download [177]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!