サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HK-500GT 3D電動ヘリコプターキット(税込。ブレードおよびエクストラ)

Generating Links

HK-500GT 3D電動ヘリコプターキット(税込。ブレードおよびエクストラ)

価格:

Now save 節約 ¥0.00 ¥0.00

¥11,452.45
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
HK500GT
送料無料したい? クリックする こちらへ 詳細情報を参照する
高性能HK-500GTは、3D飛行準備ができています。
部品の99%は、アラインT-REX 500と互換性があります
それは小さい450弟だよりもはるかに大きい、500GTは、アクションにと飛ぶことがさらにエキサイティング見るためにエキサイティングなヘリコプターです。それはの2024合金ヘッドはハードコア3Dのパイロットは文句を言わないパフォーマンスにがっかりされ、美しく塗装カウルとチタンコンポーネントがそれをバックアップするパフォーマンスで、この視覚的に見事なヘリコプター作るアルマイト処理を確実に!
あなたは文句を言わないこのヘリに '合金成分「ブリンブリン' 'をunecissaryまたは不十分なフィッティングを見つけます。その必要な場合にのみ合金を使用していますFRNの*テールによって見られるように思考の多くは、このマシンの生産に投入されています。腕と部分的に隠されたベルトプーリに強度の無い犠牲とそれが軽量化。ヘリ」のの無ブリンブリンすべてのパフォーマンスの態度を証明していません。
すべての部品は、T-REX 500と100%互換性があります
メインとテールブレード&カーボンファイバーブームの支持体が含まれています。
こちらをクリックして部品やアップグレードのために。
私たちは、あなたが文句を言わないどこでも、この品質のより良い価格のヘリを見つけ保証します!
特徴。
軽量設計は素晴らしい飛行性能と極端な3D機能を提供します。
スラスト軸受とローターヘッド/テール。
ダイレクト・ツー・スワッシュCCPMリンケージ。
ローターヘッドの近くに設計されたバッテリートレイの重心。
高効率のベルトが尾を駆動します。
完全にテールオートローテーションシステムを駆動。
テールサーボブームマウント。
カーボンファイバーブーム支持ロッド。
メインフレーム合金高剛性2024。
仕様:
長さ:840ミリメートル
身長:310ミリメートル
メインローター直径:970ミリメートル
テールローター直径:200ミリメートル
モータピニオンギア:13T
メインドライブギア:162T
テールドライブギア:31T
ドライブギア比:1:12.46:4.68
(電力システムなし)重量:1370グラム
フライング重量: 約1700グラム
必須アイテム。
ブラシレスアウトランナーモーター
サーボ:下記のリンクされたアイテムを参照してください。
ラジオギア:ジャイロ/ Rxの
ESC:80A以上です。
バッテリー:2×2200mAhの3S 20C以上です。
* FRNファイバー強化ナイロン
25%ビレット合金よりも軽量ナイロンと混合した30%のカーボンとアラミド繊維からなります。これは、標準的なプラスチックや2017合金は曲げることになる強度(弾性率)を提供します。
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Ralph | 確認済みの購入者

  • Overall
  • Quality
  • Value

for the price its ok

Dec 02, 2018

Except for the price its ok if you are experienced in Helis.
Issues that I had:
-Canopy small crack
-Main rotor head holes not exactly parallel for fixing screw
-Main gear was slightly touching main frame
-some bolts were glued with some sticky ultimate strong glue :) so I had to heat it up before loosing it.
-change bolts on tail blade grips and add thrust bearings(this is important)
Issues were small and I fixed it within 1/2 hour but you have to know what to do.
As I said for the price its ok if you are willing to except some extra work.
As a tail gyro I use a TGZ380 flybarless system with the additional connection cable of Microbeast.
Finally my endprice for a flying 500 Flybar Heli is ~220Euro - if I compare my Trex 500XT is around 800Euro but this one plays in a higher league

SheldonTobyJako | 確認済みの購入者

  • Overall
  • Quality
  • Value

Arrived when it was scheduled no damage exactly as i expected. I am very satisfied.

Nov 27, 2018

I was surprised to find that it was doubled boxed with a lot of paper protection around the main box after having seen videos posted on youtube showing kits that had been damaged in transit. This was a concern since i live in Canada and i know it had a long trip to get here. I respect Hobby King for taking appropriate steps to protect my HK500GT. Obviously they have stepped up to prevent an issue from continuing, the sign of a smart company that looks out for it's clientele. I am very happy with my helecopter and it is well worth the money and even tho i plan to upgrade a number of parts it is not because i feel that's necessary it is more my personal preference. I would be comfortable flying this kit as is. Thank you for your prompt and diligent services.

Leo | 確認済みの購入者

  • Overall
  • Quality
  • Value

Fast delivery and high quality of packaging and parts.

Oct 13, 2017

Only two days after placing the order I already received the kit from the EU warehouse! Blades felt stiff and the width was 38 mm. I also bought in the same time the HK500 GMT which came with 43 mm blade width.
The packaging of both kits was excellent and I was impressed by the high quality of the parts.
I did not assemble or fly yet, but up to now both kits perfectly meet my expectations.
Thanks Hobby King!

Paul | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 20, 2016

I purchased two of these recently and I'm glad I did it looks like I might be able to make one good one out of the two. The first kit had a scratched up chassis and the canopy was slightly cracked, but the moving parts all seem to be in good shape. The second kit had a better chassis, but the canopy was cracked severely and the main rotor has all sorts of weird motion; I suspect the links aren't set up correctly. This puts a real damper on the purchase; I kind of wish I hadn't bought these.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 10, 2016

Had to replace all screws with higher quality screws. Main shaft was bent, but repairable. Oblong main gear also replaced. Fly's well.

pooluop | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 24, 2015

don't like this kit at all utter rubbish don't bother with it you will be gutted just not worth all the hassle getting it right to fly.just bin it utter waste of money they need tarots 500 in stock the quality of them is unbelievable much better all round. got one and flies like a dream.

Mike | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2014

This is quite good for the price, however there's a few things you must pay attention to.

The screws are very soft and strip easily if you tighten them down too hard. The tail hub that comes with these is downright dangerous, don't use it, even the upraded metal one from hk also came without thrust bearings and almost came apart. Get tarot or align blade grips and hub. Also get CF servo mount, and metal mixing and washout arms,

You'll also want an align main gear as the one that comes with it is out of round.

For the prices it's definately worth your while if you're willing to work with all the smaller problems. The frame, shafts, and parts over all are pretty good. You'll be happy with the end result after putting in some time.

pooluop | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2014

this hk500 helicopters or utter crap.don't bother with them they cost you more in the long run rather buy align and be done with.i've learnt my a lesson.hobbyking need to redesign this completely.need to upgrade all the parts like the tarot kits

jamie16v | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 13, 2013

great heli, more than happy. the size is a major increase from the 450 which surprised me.
as previously stated, don`t forget to ground your tail boom for static lockout reasons caused by the friction in the belt.

starky | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 01, 2013

wow aselole heli mak nyuss pokoe siapa cepat dia dapat

顧客ファイル
left side view Download [4960]
3/4 front view Download [5140]
right side view Download [4939]
3/4 top view Download [5040]
No File Name Download [1486]
HK 500 GT Download [1486]
No File Name Download [8951]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!