New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

HK-T500 CCPM 3D EP 500サイズのヘリコプターキット(アライントレックス500)

HK-T500 CCPM 3D EP 500サイズのヘリコプターキット(アライントレックス500)

Discontinued Product

Please continue searching for a similar product.
重量:
1599 g
SKU:
HK-T500
WANT FREE SHIPPING? Click here to find out more!
有名な実績のあるT-REX 500をモデルにしました。
この大きなヘリは大きな500サイズのパンチをパックします。 2 2200mAhの3Sのパックおよび当社の500サイズの台風モーターと組み合わせて、あなたはスポーツスタイルまたは3Dフライトを問題にしませ​​ん。
部品の98%は、整列のTREX 500Eと互換性があります。

スペック。
長さ:850ミリメートル
身長:310ミリメートル
メインブレードの長さ:425ミリメートル
メインローター直径:970ミリメートル
テールローター径:200ミリメートル
モーターピニオンギア:12T / 13T(両方含まれます)
メインドライブギア:162T
オートローテーションテールドライブギア:145T
テールドライブギア:31T
ドライブギア比:1:13.5:4.68 / 1:12.46:4.68
重量(/パワー系O W):935グラム
フライング重量: 約1700グラム
必須アイテム。
ブラシレスアウトランナーモーター
サーボ:下記のリンクされたアイテムを参照してください。
ラジオギア:ジャイロ/ Rxの
ESC:80A以上です。
バッテリー:2×2200mAhの3S 20C以上です。
今V2合金斜板&厚いテールサーボマウント含まれています。
  • 単位 HK-T500
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 1599.00
  • 長さ 0.00
  • Width 0.00
  • 高さ 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I like the HK trex -500 so much that I got the HK-600GT as well. The only thing I change was rotor head on the 500. Both are great to fly. Outstanding. I would love to order a nother 500 but it's been on back so long. I do not wont to place an order and have it on back order for mounts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like the HK trex -500 so much that I got the HK-600GT as well. The only thing I change was rotor head on the 500. Both are great to fly. Outstanding. I would love to order a nother 500 but it's been on back so long. I do not wont to place an order and have it on back order for mounts.

Hello, would like to comment on the fantastic service, communication, quality of goods, and amazingly fast delivery from HobbyKing. Ordered HK500CMT (TT) on the thursday here in NewZealand, and it arrived the following thursday morning, on my door step in NZ, that is quicker than some interisland delivery's her in NZ. The kit is very good quality, and in this instance, you get more for your money. Thank you again, and will purchase further products from you in the near future.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hello, would like to comment on the fantastic service, communication, quality of goods, and amazingly fast delivery from HobbyKing. Ordered HK500CMT (TT) on the thursday here in NewZealand, and it arrived the following thursday morning, on my door step in NZ, that is quicker than some interisland delivery's her in NZ. The kit is very good quality, and in this instance, you get more for your money. Thank you again, and will purchase further products from you in the near future.

Not bad but no instructions came with it. Was going to be my first helo but will have to sit on shelf for a while till I have the time to reverse engineer the thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not bad but no instructions came with it. Was going to be my first helo but will have to sit on shelf for a while till I have the time to reverse engineer the thing.

Zatm Pohoda.Srovnval jsem plasty s MiniTitanem a je to naprosto stejn.Myslm si e za tch 34 dolar to stoj.Stavba probhla podle nvodu na T-Rexe 500 a vechno do detailu stejn.Jen je poteba vymnit smrovku a vkovku za karbonov.J jsem radji jet vymnit drky kabiny a nahon zadn vrtulky

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Zatm Pohoda.Srovnval jsem plasty s MiniTitanem a je to naprosto stejn.Myslm si e za tch 34 dolar to stoj.Stavba probhla podle nvodu na T-Rexe 500 a vechno do detailu stejn.Jen je poteba vymnit smrovku a vkovku za karbonov.J jsem radji jet vymnit drky kabiny a nahon zadn vrtulky

I have yet to build mine but I like not having to pay 5-900 (like the align kits) on my first heli! waiting for hobby king to get the new fiberglass rotor blades back in stock so get this baby up in the air. I just don't see how you can go wrong. Get some spare parts while you're at it oh and when building check the forums. As this heli comes partly already assembled you might want to tear it down and add in some lock tight thread locking compound to be sure its done right! some of the screws on this thing are loose, tear it all down and build it right! Otherwise? what are you waiting for go get one!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have yet to build mine but I like not having to pay 5-900 (like the align kits) on my first heli! waiting for hobby king to get the new fiberglass rotor blades back in stock so get this baby up in the air. I just don't see how you can go wrong. Get some spare parts while you're at it oh and when building check the forums. As this heli comes partly already assembled you might want to tear it down and add in some lock tight thread locking compound to be sure its done right! some of the screws on this thing are loose, tear it all down and build it right! Otherwise? what are you waiting for go get one!

6s pack was way too much for my setup up. Motor TY500H-1700KV
10t pinion should produce 2466 head speed. I don't have a
tack but at 60 throttle it was visibly scary fast. 5S pack was
still a little too hot but manageable. Yes I did cal the throttle on
the speed controller. Unfortunatley with the 400g 5s 20c 3000mAh
pack the heli was tail heavy. The 500g 6s pack was about right.
Gonna order a 500g 5S 20c 4000maH Zippy. Gonna be a tight fit
from what I've measured.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

6s pack was way too much for my setup up. Motor TY500H-1700KV
10t pinion should produce 2466 head speed. I don't have a
tack but at 60 throttle it was visibly scary fast. 5S pack was
still a little too hot but manageable. Yes I did cal the throttle on
the speed controller. Unfortunatley with the 400g 5s 20c 3000mAh
pack the heli was tail heavy. The 500g 6s pack was about right.
Gonna order a 500g 5S 20c 4000maH Zippy. Gonna be a tight fit
from what I've measured.

Mainly, it was well out of the box, after installing electronics and blades and fly it for a cople of lipo packs, I had to locktite ALL the screws at the fuselage and cyclic, the tail boom tends to loose the belt, so I had to screw it to the fuselage and tail holder in order to keep it tense enough, after doing all these adjustments, I flew it again, but broke the tail holder in two it's not strong enough to avoid tail from moving right-left or maybe I was too sharp to change direction. NOw it is with a metal tail holder, metal boom holder, metal swashplate, metal everywere, except from the main blade holder, which I personally like plastic. Setup is HK 500 Brushless motor, HK 85 Amp BEC, HS81MG cyclic servos, Futaba GY520 gyro with Fut 9254 servo, Zippy flightmax 6s 3000mAh 20c lipo packs. Now, I can do whatever I want with it. Ah, blades are fiber not carbon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mainly, it was well out of the box, after installing electronics and blades and fly it for a cople of lipo packs, I had to locktite ALL the screws at the fuselage and cyclic, the tail boom tends to loose the belt, so I had to screw it to the fuselage and tail holder in order to keep it tense enough, after doing all these adjustments, I flew it again, but broke the tail holder in two it's not strong enough to avoid tail from moving right-left or maybe I was too sharp to change direction. NOw it is with a metal tail holder, metal boom holder, metal swashplate, metal everywere, except from the main blade holder, which I personally like plastic. Setup is HK 500 Brushless motor, HK 85 Amp BEC, HS81MG cyclic servos, Futaba GY520 gyro with Fut 9254 servo, Zippy flightmax 6s 3000mAh 20c lipo packs. Now, I can do whatever I want with it. Ah, blades are fiber not carbon

Hola. Muy buen helicoptero. Al principio da miedo. Lo que si hay que tener mucho cuidado comparandolo con un 60 glow. Lamentablente tuve la mala suerte de que vino fallado un tornillo de la cola y se solto una palita del rotor. Pero a pesar de quedarse sin cola decendio bien. Muy Bueno. Pero me parece que es para muy experimentados. Gracias. ale

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hola. Muy buen helicoptero. Al principio da miedo. Lo que si hay que tener mucho cuidado comparandolo con un 60 glow. Lamentablente tuve la mala suerte de que vino fallado un tornillo de la cola y se solto una palita del rotor. Pero a pesar de quedarse sin cola decendio bien. Muy Bueno. Pero me parece que es para muy experimentados. Gracias. ale

got my hk500 today. everything is all there an no brokin parts. took a lil longer to get here then i wanted. i know not to do the rush shipping but ill be orderin from HK again

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

got my hk500 today. everything is all there an no brokin parts. took a lil longer to get here then i wanted. i know not to do the rush shipping but ill be orderin from HK again

This is a great copter for the price. If you have any decorating skills you can use them on this heli as the canopy comes unpainted. The parts look sturdy , but some of the small screws may want to be upgraded. I haven't flown yet as I am a newbe to heli's. I will write an evaluation when this occurs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great copter for the price. If you have any decorating skills you can use them on this heli as the canopy comes unpainted. The parts look sturdy , but some of the small screws may want to be upgraded. I haven't flown yet as I am a newbe to heli's. I will write an evaluation when this occurs.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!