新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

ギアボックスプラスプロップ8700kvとHKP8-C10マイクロパワーシステム

ギアボックスプラスプロップ8700kvとHKP8-C10マイクロパワーシステム

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
18 g
SKU:
HKP8-C10
商品概要
ギアシステムと7x3.5プロップとマイクロブラシレス アウトランナー
小型モータシステムのための巨大なトルク。
仕様:
タイプ: ブラシレス
外形寸法(モータ/ギアボックス):44のx 32ミリメートル
シャフトの長さ(マウントを支える):15ミリメートル
軸径(プロップマウント):3.7ミリメートル
重さ:10グラム
最大の電流:4.8A
最大ワット:40ワット
KV:8700rpm / V
マックスはボルト:8.4Vを
推奨小道具:7x3.5
テストデータ。
電圧:7.4V、8.4V
電流:4.1A、4.8A
ワッツ:30.34、40.32W
推力:172グラム、212グラム
効率(G / W):5.67、5.26
Product
Specifications

追加情報

  • 単位:
    HKP8-C10
  • Brand:
    N/A
  • 重量(g )
    18.00
  • 長さ
    175.00
  • Width:
    21.00
  • 高さ:
    70.00
  • KV ( RPM / V )
    8700.00
  • 最大電流( A )
    5.00
  • 電力( W ):
    40.00
  • 長さB ( mm)の:
    6.00
  • ことができます長さD (ミリメートル)
    5.00
  • 最大電圧( V )
    8.00
  • シャフトA (ミリメートル):
    1.00
  • Unit Weight (g):
    10
  • 直径C (ミリメートル)
    18.00
  • 総丈E (ミリメートル)
    17.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Vraiment du par ce produit, l'hlice ne se monte pas dessus il faut l'ajuster!
Je l'ai utilis sur un modle indoor 3D de 65cm d'envergure et 120gr RTF en 2S lipo, le moteur a eu du mal le faire dcoller, alors pour la 3D il est vraiment pas conseiller!
De plus, au premier vol, l'axe de la couronne secondaire s'est dsolidariser!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A nice combo to have for self-built indoor flyer. A good replacement for efilite micro model too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Buena opcion para mi avion f3p
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have not been able to test yet but find one major flaw. The Prop adapter is a slip fit and doesn't allow anyway to tighten the prop to the shaft. I will have to use some type of glue to secure it or try to thread the plastic prop mount to accept a screw. Also there are only 2 hookup points for the mount. Three would be better so you can set side and down thrust. As it stands I will have to make several mounting boards with different offsets until the correct thrust line is determined.

Randy
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Was able to destroy this motor gearbox combo within an hour of bench testing. First the prop started to slip on the shaft adapter. So I fixed that. Second the large gear started to slip outward toward the prop. So I fixed that. Third motor mounted gear moved in toward the motor. So I fixed that. fourth after running off and on with a 2S pack I noticed some notchy rotation. Inspection revealed the prop shaft had worn its hole in the plastic mount out. Could not fix that.

The motor actually ran fine and the metal 1.5MM prop shaft is pretty hard. Unfortunately the plastic bearing surface is not so tough. You may have better luck than I did but I can not recomend this item.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor seems very notchy, maybe due to small number of magnets in shell. Makes gearbox seem to be binding. With gearbox will not start on 1 cell using either TG or HC 1s 3A ESC. Will run on 2s but I do not have a 2s application small enough. I will try the motor without GB on 1s and see how that goes.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。