New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

HKPilotマイクロGPSとコンパスモジュールU-BLOX 7(8グラム)

HKPilotマイクロGPSとコンパスモジュールU-BLOX 7(8グラム)

Discontinued Product

Please continue searching for a similar product.
重量:
22 g
SKU:
387000058-0
WANT FREE SHIPPING? Click here to find out more!

新HKPilotマイクロGPSとコンパスモジュールは、小さなクラスのマルチコプター、平面あるいはスタンドアロンOSDのアプリケーションに最適です。新しいユーブロックスMAX 7チップセットと一致した15x15デュアル増幅セラミックアンテナを搭載し、このマイクロGPSはフルサイズのパワーを梱包されています。マイクロGPSはまた、干渉源から離れてあなたのコンパスを取得するには、リモートの場所のためのハネウェルHMC5883コンパスを持っています。このすべてのパワーと機能は、すべてが8グラムで、HKPilotマイクロは、すべてのGPSので、5ピンHKPilotのメガ(APM)の両方のためのケーブルが付属しており、6ピンが32(Pixhalk)をHKPilot。このマイクロGPSは、同様にまた、MWCとNaze32アプリケーションに最適です。

特徴:
•アクティブセラミックアンテナ、15×15ミリメートルは、2 LNAローノイズアンプが付属しています
•EMI保護設計のUARTインタフェースは、RXDポートは、5Vレベルの入力信号と互換性があることができ
•HMC5883コンパスI2Cインタフェースの造り
•HG-U06は、飛行制御のほとんどで、標準UART(TTL)シリアルインタフェースと共通GPS
•デフォルト設定ボーレート:38400、更新レート:10Hzの
•56CHのu-bloxの7のマルチGNSS(GPS、GLONASS、ガリレオ、QZSS及びSBAS)エンジン

仕様:
寸法(mm):20(幅)×22(長さ)8.5(H)×
重量(g):8.2(ケーブルなし)
GPSモジュール: ユーブロックスMAX-7Q
オンボードインターフェース: モレックス1.25ミリメートル-4ピン(I2C)、6PIN(UART)

含まれるもの:
GPSモジュール* 1
I2Cの4ピンケーブル* 1
5ピンケーブル* 1にUARTの6ピン(APM用)
6ピンケーブルにUARTの6ピン* 1(PX4用)

* PX4 / Pixhawkは、学術、趣味や産業界へのハイエンド自動操縦装置を提供することを目指して独立し、オープンソース、オープンハードウェアプロジェクト(BSDがライセンス)であります

** APMへの参照が参照ArduPilotのプロジェクト、3DRとオープンソースコミュニティによって開発されたArduinoのオープンソース・コンピューティング・プラットフォームに基づくオープンソースのオートパイロットの家族。それはArduPilotメガ(APM)エレクトロニクスと異なる車両のためのフリーソフトウェアのバージョンの範囲の選択で構成されており、オープンソースクリエイティブコモンズライセンスによって支配されます。

*注:これはオリジナルのArduinoのブランドの製品ではありません。

  • 単位 387000058-0
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 22.00
  • 長さ 80.00
  • Width 15.00
  • 高さ 60.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Takes impossibly long times go get a fix. Was hoping to use it on a 250 FPV Quad, but now I fear the antenna is so lousy that it won't even work for return to home function.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Takes impossibly long times go get a fix. Was hoping to use it on a 250 FPV Quad, but now I fear the antenna is so lousy that it won't even work for return to home function.

It was needed to replace the diode which is in serie with the battery (the original one was a 0,5V one and I put a 0.2V one instead to get a better charge level of the battery, It is not mandatory to do it but it allows faster hotstart ). As the other people said, the configuration was initially 9600baud/1Hz. It was easy to change it to 38400Baud/ 5Hz with Ucenter. Once the new configuration is saved, it looks like the GPS doesn't work with Ucenter anymore (no more satellite capture), but once plugged to an APM, it works fine (I tested that with others ublox6 and it is the same strange behavior...). I tried to download the 3DR configuration file but it didn't work : The changes need to be done manually in the Ucenter. The configuration is kept well in the gps (some other reviewers said it was not retained). The size and weight is very appreciable for my QAV250. I just hope HK will update/replace this bad diode and put the right configuration before sending it to the others customers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It was needed to replace the diode which is in serie with the battery (the original one was a 0,5V one and I put a 0.2V one instead to get a better charge level of the battery, It is not mandatory to do it but it allows faster hotstart ). As the other people said, the configuration was initially 9600baud/1Hz. It was easy to change it to 38400Baud/ 5Hz with Ucenter. Once the new configuration is saved, it looks like the GPS doesn't work with Ucenter anymore (no more satellite capture), but once plugged to an APM, it works fine (I tested that with others ublox6 and it is the same strange behavior...). I tried to download the 3DR configuration file but it didn't work : The changes need to be done manually in the Ucenter. The configuration is kept well in the gps (some other reviewers said it was not retained). The size and weight is very appreciable for my QAV250. I just hope HK will update/replace this bad diode and put the right configuration before sending it to the others customers.

Completely useless thing. 2.3V battery, no memory, antenna without amplifier. Factory setup 1Hz, 9600 bit / s. Changed settings are kept for 5 minutes, then return to the factory. In 30 minutes can't defined position. Do not throw away money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Completely useless thing. 2.3V battery, no memory, antenna without amplifier. Factory setup 1Hz, 9600 bit / s. Changed settings are kept for 5 minutes, then return to the factory. In 30 minutes can't defined position. Do not throw away money.

Takes forever to get a fix. Does not like to save compass settings. And works great for a smaller quad where weight and space are limited. I do not recommend this product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Takes forever to get a fix. Does not like to save compass settings. And works great for a smaller quad where weight and space are limited. I do not recommend this product.

Mine arrived missconfigured (9600 Baud) without a chance to update the Settings...Button Cell only loads to 2.8 volts (after 48h) and even after re-solder the antenna it took hours to get a Fix..
absolute worst GPS i ever had...no way to get this thing to work...

:-(

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine arrived missconfigured (9600 Baud) without a chance to update the Settings...Button Cell only loads to 2.8 volts (after 48h) and even after re-solder the antenna it took hours to get a Fix..
absolute worst GPS i ever had...no way to get this thing to work...

:-(

Customer files
HKPilot Micro GPS and Compass Module U- Download [626]
HKPilot Micro GPS and Compass Module U- Download [584]
No File Name Download [0]
Naze32 pinout Download [39]
CC3D Connection Download [87]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!