New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

トールカニランディングギアとHobbyKing 650X6折りたたみHexaCopterフレーム(KIT)

トールカニランディングギアとHobbyKing 650X6折りたたみHexaCopterフレーム(KIT)

Discontinued Product

Please continue searching for a similar product.
重量:
859 g
SKU:
387000044-0
WANT FREE SHIPPING? Click here to find out more!

Hobbyking 650X6 HexaCopter、高価格帯の折りたたみ600クラスHexaCopterに素晴らしい代替手段をご紹介します。

HK 650X6は、地上高の200ミリメートルにわたって提供し、私たちの人気の多機能カニギアが付属しています。マルチファンクションギアがあなたのアクセサリーのための "クリーン"振動フリー実装プレートはフロントとリアの2を提供し、グロメットのアイソレータを使用して、標準化された60ミリメートルフックとロッドマウントでHK 650X6に接続します。 HexaCopterは簡単に輸送および貯蔵を可能にする、その腕を平行に折り畳むことができます。モータは、二重の複合サポートでサポートされており、センターフレームは、フライトコントローラとGPSタワー取り付けプレートを持っています。

HobbyKing 650X6 HexaCopterは、航空写真の仕事や耐久飛行のための素晴らしい選択肢です。一番の特徴は、HobbyKing価格です。

特徴:
•容易な輸送および貯蔵のための折りたたみ武器
•トールカニのランディングギア
•デュアル孤立したクリーンな取付プレート
•フライトコントローラとGPS取り付けタワー
•軽量
•デュアルモーターサポート

仕様:
重量:612グラム(エレクトロニクスなしフレーム)
幅650ミリメートル(モータ軸中心にモータ軸中心)
モーターボルト穴:15〜25ミリメートル幅

必須:
モーター:2212〜4822クラスx 6
バッテリー:2200〜6500mah
フライトコントローラ
5CH無線制御システム
ESC 20〜30A×6

*注:これは、ビルダーキットであり、電子的またはモーターが含まれていません

  • 単位 387000044-0
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 859.00
  • 長さ 350.00
  • Width 60.00
  • 高さ 200.00
  • Foldable Hexacopter
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

It is carbon fiber, aluminum booms and pretty strong for a very cheap frame. Number 1 con: it is a very small area to mount FPV gear, etc. I made a very large plastic plate from a 5.5 gallon bucket, dyed it black using RIT dye (get at grocery stores, wal-mart, etc. for dyeing clothes) and it works great. Made it almost the same size as the bottom 2 CF plates. If you are planning to mount FPV gear it will not fit without you modifying it.

Number 2 con: the frame is cheap so it is not going to withstand a hard crash without breaking the carbon fiber plates. But for this low price it is a good deal. Just make sure you can fly without crashing it and you will be all right.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is carbon fiber, aluminum booms and pretty strong for a very cheap frame. Number 1 con: it is a very small area to mount FPV gear, etc. I made a very large plastic plate from a 5.5 gallon bucket, dyed it black using RIT dye (get at grocery stores, wal-mart, etc. for dyeing clothes) and it works great. Made it almost the same size as the bottom 2 CF plates. If you are planning to mount FPV gear it will not fit without you modifying it.

Number 2 con: the frame is cheap so it is not going to withstand a hard crash without breaking the carbon fiber plates. But for this low price it is a good deal. Just make sure you can fly without crashing it and you will be all right.

I recived it in one week from china. plates are carbon fiber got all screws and spacers and I also get an extra spacers for distribution board which I like a lot. Only thing is that it doesn`t have much space for all electronics in the middle. Now I have to figure it out where will FPV modul fit. Overall this kit is very good for beginners like me

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I recived it in one week from china. plates are carbon fiber got all screws and spacers and I also get an extra spacers for distribution board which I like a lot. Only thing is that it doesn`t have much space for all electronics in the middle. Now I have to figure it out where will FPV modul fit. Overall this kit is very good for beginners like me

Its a Great Fream but this Gold stuff is not included you will only get that in Black

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its a Great Fream but this Gold stuff is not included you will only get that in Black

this hex is a first great build kit,goes together easy,everything fits nice,or for the exp flier too,i used 6 multistar elite 1220 920 kv motors,6 afro 30 amp esc 1 with bec 5 opto, and a 5000,30 c 3 cell battery hard case style , 6 carbonfibre 9x4.5 props, and the price is awesome 35.00,its a high quality kit light and strong too and love the wide tall landing gear,it is so simple to build all u need is allen wrench,and socket to fit nuts,i got 20 minutes on 2nd flight with a 5000 battery,my total cost was 226.00 minus the radio,im ordering another one at these prices,

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this hex is a first great build kit,goes together easy,everything fits nice,or for the exp flier too,i used 6 multistar elite 1220 920 kv motors,6 afro 30 amp esc 1 with bec 5 opto, and a 5000,30 c 3 cell battery hard case style , 6 carbonfibre 9x4.5 props, and the price is awesome 35.00,its a high quality kit light and strong too and love the wide tall landing gear,it is so simple to build all u need is allen wrench,and socket to fit nuts,i got 20 minutes on 2nd flight with a 5000 battery,my total cost was 226.00 minus the radio,im ordering another one at these prices,

ladies,LADIES,pleaseeee. this is an awesome hex,u wonder about a motor that don't match up get the multistar elite 2212 920 kv ones,and the afro 30 amp speed controller, recommended 4 the multirotor , and the hardcase control board with the offboard programmer,this is my first build I wanted a hex that I can use aspec or turnigy fast charge battery I get tired of waiting over1.5 hours for my phanton2 to charge battery.oh im gettint rid of the phantom 2 and the 2 battery I love hk stuff its awesome,and afforadable too

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ladies,LADIES,pleaseeee. this is an awesome hex,u wonder about a motor that don't match up get the multistar elite 2212 920 kv ones,and the afro 30 amp speed controller, recommended 4 the multirotor , and the hardcase control board with the offboard programmer,this is my first build I wanted a hex that I can use aspec or turnigy fast charge battery I get tired of waiting over1.5 hours for my phanton2 to charge battery.oh im gettint rid of the phantom 2 and the 2 battery I love hk stuff its awesome,and afforadable too

Ottimo telaio in alluminio e fibra di vetro! Il carrello resiste a cadute di quasi 2 metri

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ottimo telaio in alluminio e fibra di vetro! Il carrello resiste a cadute di quasi 2 metri

Just received my hexa and it was a quick mount. It is very nice and it seems strong.The landing crab does not look so strong, which is made of plastic.But overall it is a nice frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received my hexa and it was a quick mount. It is very nice and it seems strong.The landing crab does not look so strong, which is made of plastic.But overall it is a nice frame.

Great value 650 size hexacopter frame. Better than I expected and I would definitely buy another one. There's a few comments around that folding it requires loosening off bolts and that it's too much trouble. That's not true though. If you use the washers on the outside bolts on the folding arms and don't over tighten them, you can hold the middle arms and give it a firm shove to fold. It will still be plenty firm enough to not move in flight. That might not be as an elegant solution as some folding frames, but hey, look at the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great value 650 size hexacopter frame. Better than I expected and I would definitely buy another one. There's a few comments around that folding it requires loosening off bolts and that it's too much trouble. That's not true though. If you use the washers on the outside bolts on the folding arms and don't over tighten them, you can hold the middle arms and give it a firm shove to fold. It will still be plenty firm enough to not move in flight. That might not be as an elegant solution as some folding frames, but hey, look at the price.

flight https://www.youtube.com/watch?v=X4fafKAED1I
blah blah blah blah (I dunno how long review should be to be published)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

flight https://www.youtube.com/watch?v=X4fafKAED1I
blah blah blah blah (I dunno how long review should be to be published)

not a bad kit, but you do get what you pay for! who ever is in charge of QC should be allotted a full bowl of rice to improve performance. I had a total of 13 screws that were not to any standard 2 didn't even have a socket head. and the instruction manual what a joke!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not a bad kit, but you do get what you pay for! who ever is in charge of QC should be allotted a full bowl of rice to improve performance. I had a total of 13 screws that were not to any standard 2 didn't even have a socket head. and the instruction manual what a joke!

  1. 1
  2. 2
Customer files
HobbyKing 650 12" Maximum Props! Download [289]
hexa650 Download [1939]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save