新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

(フラップ付き)HobbyKing FPV / UAVファイバーグラスキットV2

(フラップ付き)HobbyKing FPV / UAVファイバーグラスキットV2

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
3600 g
SKU:
HK-UAV01

Combine

essential items and
esc
battery
servo
商品概要

ビルドアッププライとバルサの建設との完全なグラスファイバー胴体を搭載し、HobbyKing FPV / UAVはFPV飛行性能のバーを高めるために設定されています。大モーターマウント面積は、アプリケーションに応じて、モータの様々なサイズのを可能にします。剛性の機体は、飛行性能の高いレベルを提供しています滑らかなガラス繊維の仕上げは泡面に優れた空力特性を提供します。大規模な明確なキャノピーはFPVカメラに最適ですまたはカスタムセットアップのために簡単に削除または変更することができます。胴体は重いペイロードと低速着陸を保証するカスタムセットアップとスプリットフラップの様々な可能FPV機器のための十分なスペースを誇っています。

あなたは60Amp ESC、4S 2200mAhのへの3Sは〜4400mahリポバッテリーとあなた自身の送信機と受信機に35〜42サイズburshlessのアウトランナー、5×9グラムサーボ(各コントロールサーフェス用と操舵可能な前輪用1)、40が必要になります(送信/受信)。すべての一般的なハードウェア(プッシュロッド、ネジ、着陸装置など)が進行中でこのキットを入手するために含まれています。

いくつかのモデリングの経験がしかし、完成した製品は、泡に優れた飛行特性を持つ高品質のものになり、寿命が続く、このキットを完了する必要があります。

仕様:
ウイングスパン:1660ミリメートル
胴体:1190ミリメートル
モーターマウントの直径:58ミリメートル
ヒューズへのマウントの中心からの距離: 直径8小道具114ミリメートル(最大"]
乾燥重量:1300グラム
5チャンネル(スロットル、エルロン、エレベーター、ラダー/ステアリング、フラップ)

必須:
モーター:35〜42シリーズアウトランナー
ESC:60Aまで40A
サーボ:5×9グラム
バッテリー:3S 4Sに2200mAhの〜4400mah

Product
Specifications

追加情報

  • 単位:
    HK-UAV01
  • Brand:
    N/A
  • 容量(mAh )
    いいえ
  • 重量(g )
    3600.00
  • 長さ:
    1230.00
  • Width:
    185.00
  • 高さ
    315.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane, slightly on the heavy side for my liking.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane flies OK but requires a LOT of weight forward, and requires a significant amount of space for takeoffs. Front gear will fail unless reinforced. Many convert to tail-dragger form more robust configuration. This is not, in my opinion, a beginners ship and the fuselage will NOT survive any significant "landing errors". The wing and tail surfaces, however are heavy but strong. Perhaps the best solution would be to mount this wing and stab on a foam fuse and hand launch it?
I used 3s 5000 and 300w motor, sufficient for the task. This plane cannot be hand-launched so don't even think about it!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Yip, a thing of beauty. High quality construction. The wings are ply and balsa with fibre shaped edges. The fuselage is HUGE inside. She has a fat ass. Heavy indeed. The horizontal stabilizer and elevator is big. Around 30pcnt the size of the main wing. The flaps are great. Good design. I'm going to have a lot of fun with this bird - thanks HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
High quality plane, but very poorly engineered. The assembly process went without a hitch, but this plane is VERY tail heavy. It was very unsettling to see how much weight was needed to balance this plane at the recommended center of gravity. On top of that, this plane really does need a larger propeller than what fits, I had to get a custom made motor mount for this plane to allow the motor to be placed higher up for a larger prop to clear. Not happy with this plane, if you're comfortable flying something rather fast and have lots of experience, it may well be for you, but it's not my cup of tea.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I recently purchased this model via the German warehouse. It did arrive in great condition, without any scratches or dents.
However, the model seems to be a bit too heavy for a decent FPV plane. The design itself is also very tail-heavy, so even with a 5000mah and some weight in the front, I can barely maintain the CG.
The V2 version does come with flaps which takes a lot of tension out of landing as the normal landing speed would be a bit too high. What they should also add as an improvement for the future for those of us who just dont have a concrete landing strip is to put on bigger wheels and a more reinforced front-wheel. You have to keep in mind that with all that weight in the front, it will be quite difficult to keep the front-wheel out of harms way.
Overall the quality is quite good at such a low price. The finish of the fuselage and the wings is excellent.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Price vs Quality is excellent. It is really good for FPV/UAV. I use this setup list. ::Brushless Motor=1 x NTM Prop Drive Series 35-36A 1800Kv/875w (NTM3536A-1800) ::Propeller=1 x TGS Sport 8x5E Precision propeller (TGS8x5E) ::ESC w/BEC=1 x HobbyKing 70A BlueSeries Brushless Speed Controller (9164000012) ::Servos=5 x Corona 928BB Servo 2.0kg/ 9g/ 0.13sec (CS928BB) ::LiPo Battery=1 x ZIPPY Flightmax 4000mAh 3S1P 20C (Z40003S-20) ::Tx/Rx=1 x HobbyKing HK6S 2.4Ghz FHSS 6Ch Tx & Rx (Mode 2) (HK-6DF-M2)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just maiden mine set cg at 3 inches, had to put in a few clicks of down elevator, 3-1/4 inches cg might be better. Using eflite power 32, master airscrew 3 blade 10-7, turnigy 5s 5000mah, plush 60a esc, auw 6lbs 7oz, tons of power took off like a rocket, cruised at a little over half throt approx 360 watts. Landed nicely with 15 degrees of flap. Build notes; This bird is tail heavy choose light but strong servos for the tail, reinforce nose gear area with some fiberglass and epoxy. choose a battery that will fit as far forward as possible.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ber die Formschnheit kann man sich streiten, aber als private Drohne bestens geeignet. Die Verarbeitung ist sehr schn, kleine nderungen wie Fahrwerk und Kammerahalterung waren ntig und fertig. Komplettes FPV equipment passt locker rein wie z.b. Autopilot&OSD und immer noch Platz satt. Natrlich nicht fr den Anfnger geeignet da keine Bauanleitung, aber wer in der FPV-Liga ist, fr den ist der Zusammenbau schnell erledigt und selbstverstndlich, fr alle Anderen gibt es immer noch Youtube.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Kit did not come with instructions, and was missing parts. Tried to get help from HK and no one ever got back to me. I would skip this model. Even if everything was there the model is lacking quality and design. Ended up giving the model away when it was halfway built.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi got mine last week,a bit of work required to build,flys great.using 5amp hour 4 cell battery,800watt motor.9x6 prop.you will have to modify flaps as they are hindged wrong and can not give enough travel,otherwise a well built model.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。