HobbyKingキネティックの交換モーター2226-1250KV

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 25, 2012

semble moins puissant que le moteur d origine avec 9*6 cam aeraunote

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 17, 2012

Gets VERY hot on 3s Only use on 2S

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 07, 2012

Just works, no problems found so far.

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 04, 2012

Put one in my Merlin and it works well but Id wished for some higher kV like 1400 or so on 3S for higher speed (not sure I had the original blades, had 8x5, 7x4 and 6.5x4)

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 02, 2012

I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?

• Overall
• Quality
• Value

Customer Rated

Sep 11, 2011

I had to replace the original motor in the 800 glider with this replacement motor. The motor 4 mounting screws that came with the new motor are too small for the new motor screw holes. The old screws are of no use in the new motor because the new motor has bigger screw holes. Will I get the correct size screws for HobbyKing?

• Overall
• Quality
• Value

Customer Rated

Aug 10, 2011

I have replace this motor ADH300L Brushless Outrunner 1100kv on Kinetic 800. The axis has been turned concerning regular position. It is necessary to pierce deepening in an axis under the screw a fixing rotor.

Holes have approached ideally. Flies Kinetic with this motor very well, draft suffices for launch vertically upwards.

The controler 18A is heated with the given motor, I have put turnigy 30, it isn't heated

ADH300L Brushless Outrunner Kinetic 800. . .

&#1