サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

リモートプログラマーとHobbyKing KK2.1HCマルチローターハードケースフライト・コントロール・ボード

Generating Links

リモートプログラマーとHobbyKing KK2.1HCマルチローターハードケースフライト・コントロール・ボード

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,324.30
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9171000268
送料無料したい? クリックする こちらへ 詳細情報を参照する

ローター革命の次の進化はここにあります! KK2.1HC(ハードケース)が更新され、センサ、メモリ、ヘッダピン、ハードケースとリモートプログラマーと新しい発見力を梱包されています。

KK2.1HCは、第一世代KK飛行制御ボードの次の大きな進化です。 KK2.1HCは皆、だけでなく、専門家へのマルチローターフライトをもたらすためにゼロから設計されました。リモートLCD画面とソフトウェアで構築されたが、これまで以上に簡単にインストールとセットアップになります。画面とプログラミングボタンはリモートプラグインプログラマと取り付けられたハードケースに再配置されている、これはKKが非常に耐久性になります。プログラマプラグインは、オンボードのバージョンとまったく同じフォーマットを使用し、迅速な値の変更のためにいつでもプラグインすることができます。この新しいデザインは、株式会社は、オンボードのボタンと画面へのアクセスは問題だった、あなたもKK側に差し込まれたケーブルを残し、プログラマへのアクセスのためにそれを実行することができ、フレーム内に設置することができます。ハードケースはまだ標準化された45ミリメートル取り付け穴を保持し、現在内部で実装されているブザーを持っています。液晶画面に場所や損傷をマウントすると、過去のものです。

マルチ回転翼機の種類のホストがプリインストールされている、単に、モーターレイアウト/プロペラの向きを確認し、あなたの工芸品の種類を選択し、あなたのESCやラジオを校正し、あなたが移動する準備が整いました!これはすべて、画面の指示に従うことは容易で行われます!

元KKジャイロシステムは、これまでこの最も安定したKKボードを作り、オートレベル機能の追加を可能にする、非常に敏感6050 MPUシステムに更新されました。 KK2.1HCの中心には64KのメモリとアトメルMega644PA 8ビットAVR RISCベースのマイクロコントローラです。追加の極性保護されたヘッダは、電圧検出ので、オンボードのはんだ付けの必要がないために追加されました。ボードを活性化し、非活性化するときに便利な圧電ブザーは、音声警告のために含まれています。

KK2.1HCは、電圧センスヘッダやオンボードブザーに極性保護を追加しました。電圧センス線は、より良い精度のため更新されています。ハードケースは明らかにインストールおよび接続スナップを作り、ラベル付けされています。

あなたはマルチローターフライトに新しいしているか、セットアップにKKボードはその後KK2.1HCがあなたのために構築された方法について不明な点があった場合。 6ピンUSBasp AVRプログラミングインタフェースは、将来のソフトウェアアップデートが迅速かつ容易になることが保証されます。

仕様:
サイズ:55ミリメートルX 55ミリメートルX 19ミリメートル
重量:32グラム
IC:Atmega644 PA
ジャイロ/ ACC:6050MPUインベンセンス社
オートレベル: はい
入力電圧:4.8-6.0V
AVRインターフェイス: 標準の6ピン。
受信機からの信号:1520us(5チャンネル)
ESCへのシグナル:1520us

ファームウェアバージョン:1.6:
ファームウェアをプリインストール。
Dualcopter
Tricopter
Y6
クワッドローター+
クワッドローターX
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8のX
H8
H6
V8
V6
Singlecopter 2M 2S
Singlecopter 1M 4S

(「ミキサーエディタ」オプションを使ってカスタムミックス)

ミキサーエディタはどこで、どのくらいの信号モータはスティック入力とセンサから受け取るあなたが調整することができます。これは、最大8モータやサーボで可能な任意の構成を作成することができます。

*注:プログラマは抜いて、プログラム、単にプラグイン、KKが動作するためにプラグインを維持する必要はありませんその後飛びます

**注:あなたの初期セットアップの一環として、最新のソフトウェアバージョンにアップデートするためにすべての方法をお勧めします(これはV1とは異なる6 KK2.0のため。)。

***注:KK2.1HCがKK2.1と同じファームウェアを使用しています〜2.1.5

  • HobbyKing KK HC
  • Howd to set a board like this up?
  • RC car gyro using a KK2.1HC Multi-Rotor Flight Control Board
  • RC UFO Flying Saucer
  • UFO Flying Saucer with Improved Tractor Beam
  • KK2 SingleCopter 2m 2s Maiden
  • 2018 UFO Flying Saucer Sighting with Tractor Beam
  • RC UFO Flying Saucer Sighting with Tractor Beam
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 20, 2016

Great product, excellent! But you have to set it for proper operation

NewToHobbyKing | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 12, 2016

Well i plug her in. A simple task and right away the L.E.D. came up with Safe and Menu. After a few tries I was able to flick around the menu. Then I did something wrong and was unable to rearm my Quad. I look at You Tubes and found how to fix it all and off I went!

FURY. | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 08, 2016

very niceeeeeeeeeeeeeeeeeeeeeeeeeeeee

Evil Pusher | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 01, 2016

As know - a real great and easy to handle FC

Michael | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 16, 2016

Don't buy this do yourself a favor and buy a naze32 rev 6 from a US supplier HK sucks and if you have to return anything they'll say they never received it and then what options do you really have when dealing with a foreign country?

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 12, 2016

love the kk board greatproduct

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 13, 2016

A multirotor[1] or multicopter is a rotorcraft with more than two rotors. An advantage of multirotor aircraft is the simpler rotor mechanics required for flight control. Unlike single- and double-rotor helicopters which use complex variable pitch rotors whose pitch varies as the blade rotates for flight stability and control, multirotors often use fixed-pitch blades; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.



Due to their ease of both construction and control, multirotor aircraft are frequently used in radio control aircraft and UAV projects[2][3][4][5][6][7] in which the names tricopter, quadcopter, hexacopter and octocopter are frequently used to refer to 3-, 4-, 6- and 8-rotor helicopters, respectively.[8]





Hexacopter.[9]

In order to allow more power and stability at reduced weight coaxial rotors can be employed, in which each arm has two motors, running in opposite directions (one facing up and one facing down).[10] fgd

David | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 04, 2016

Was running Multiwii boards in my Quads and liked them but never really was satisfied with them and lost interest in flying them. Bought one of these boards and Love them. Has renewed my interest in flying Quads. Simple and fast to program and not having to plug them in to a laptop to program is fantastic for me. Carry the little programmer in your pocket and away you go. Nice stable flight right out of the box, Thank you Hobbyking

Ron | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 30, 2016

I have been in the RC hobby for many years and this is my first quad project. I used the red HK 250 frame, this controller, LD power race spec 1806 motor/esc kit (all US warehouse items). As others have done I put the unit in label up and it wouldn't calibrate the Y axis. once I turned it label down it calibrated. I got the instructions from the files tab above. (thank you who ever you are for that) The set up was very easy and straight forward. As advertised. The controller was a little big for the frame but I was able to modify the frame so it would fit between the top and bottom frame (building skill needed, If you are not a skilled builder then I would maybe suggest the KK2.1 (no hard case) do to the size. My quad flew very stable the very first flight on the default settings (not even trim needed) only thing I changed after the first flight was to change the yaw to 75pcnt from 50pcnt. now it flys perfect. NICE controller

Larry | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 26, 2016

Right out of the box this fc was defective. The z accelerator was defective so could not calibrate. Poor customer service as I have to wait 2 weeks from the day they receive the unit before they will ship a replacement. So if I just order a new one they will not ship for free. That's why I will order a new fc from US supplier.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
顧客ファイル
No File Name Download [2798]
on 450 quad Download [2798]
without box Download [5099]
BROKEN VOLTAGE SENSOR PINS on arrival by Download [2982]
kk2-1_1-9S1 Download [128]
H4 w/KK HC. PERFECT!!! Download [4598]
HK 2.1 manual (same as the hard case) Download [452]
Sheared voltage sensor (pwr) pin? Download [2005]
168mathlib_macros.inc Download [5]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!