サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

防振と統合されたPDBとHobbyKingシミターFPVレーシングドローン230ミリメートルクアッドコプター

Generating Links

防振と統合されたPDBとHobbyKingシミターFPVレーシングドローン230ミリメートルクアッドコプター

価格:

Now save 節約 ¥0.00 ¥0.00

¥8,046.02
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9366000019-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

HobbyKingシミターは、すべての複合構造の230ミリメートルツリー抱いFPVレースドローンです。シミターは、FCとカメラからのモーターとプロペラ振動を分離するために振動シンブルを使用するマルチフレームの振動絶縁システムを持っています。振動系では、より厳しいPIDのを実行し、gello無料のビデオFPVセッションを持っていることができます。下部フレームもクリーンインストール機器のPDBとESCマウントサポートが組み込まれています。

16x19mmと12ミリメートルの間隔からマウントアーム・サポート・モーター。最大プロペラサイズが5インチと1704年〜2206年のクラスのモーターに最適です。耐久性のある複合構造は、スナップインをインストールすること、多くの取り付けのための引当金とストラップが付属しています。フレームは、フレーム間でマウント8単離するための振動シンブルだけでなく、新たな楽しみFPVのカメラを持っています。シミターは、このローカルのフライングサイトジップアラウンドする偉大な小さなクワッド作り、ホット赤陽極酸化アルミニウムのスタンドオフとクールマット仕上げといくつかの洗練されたルックスを持っています。

特徴:
•コンポジット建設
•PDBに建てられました
•モーターと電源オプションの広い範囲
•より多くの部屋と簡単にレイアウト用大型二防振フレーム
•近接のためのコンパクトなサイズは、障害物の周りを飛びます
•4×5インチの小道具が含まれています

仕様:
ホイールベース:230ミリメートル
重さ:180グラム
身長:ランディングギアとセンターケージと82ミリメートル

必須:
Xモーターズ1506年〜2208年4
1つのx電池800〜1300mah 7.4〜11.1V(2または3セルLipoly)
4×ESCの7〜12A
1×マルチローターフライトコントローラー
4chのラジオ(FPVとFCの使用をお勧め6CH)
FPVギア(オプション)

  • HK Scimitar FPV 230mm Quad
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 04, 2015

the frame is heavy for the multistar babybeast combo, maybe better with the 2216-800Kv combo

Andrew | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2015

The frame went together quickly without ant problems. I'm running afro slim 12a ESC's with baby beast motors on Naze32 FC. The vibration isolation works great. The only thing I changed so far was to cut the legs on the bottom in half. I figure they'll hold up better if there is less leverage on them in a crash.
The only problem I have is on bumpy landings. Anything less than a perfect touchdown causes the upper frame to lean because of the rubber dampeners, and the 5" blades are very close and will hit the aluminum struts. Not too big of a deal as I want to make longer arms to try out 6" props anyhow, as I need about 60pcnt throttle to hover without FPV gear. So far I've only tested it indoors because there is 6' of snow outside, and I'm a terrible pilot.
To all the people complaining about only having 4 solder pads: You can put more than 1 wire on a pad. My front esc's share a set of pads, and my rear ESC's share a set of pads leaving free space for my UBEC and LEDs on one, and battery leads off another. Hope that helps.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 20, 2015

Frame is around 185 grams, which to me is a bit heavy, also the entire top half of the frame is supported by rubber standoffs which makes it bad in a crash, just be ready to search for all 8 of the rubber mounts because there are no extras. Also the power distribution board has no spot to solder in a battery lead. Fairly sturdy for the crash that I was in though.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 07, 2015

gutes Frame, leider kein Carbon. Dirty/Clean Frame koppeln gut aus, ruhiges schones FPV bild

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 02, 2014

Just built my first mini quad today (My fifth multi-rotor) and it was a breeze to put together. It is a nice frame and is holding up really nicely. I can recommend this item!

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー