新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

HobbyKing X-1000アドバンストヘッド・運動・トラッカージャイロ

HobbyKing X-1000アドバンストヘッド・運動・トラッカージャイロ

QTY:

Now save save AU$0.00 AU$0.00

AU$63.63
Stock:
重量:
125 g
SKU:
HKX-1000

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
acc
商品概要
X-GYRO 1000は、それはまた、無人機やロボットを制御する三転送の分野で使用することができ、2軸のように頭の動きのような複雑な3次元の動きを追跡するために設計されたGセンサ技術に基づいて、追跡システムを頭とあります手から二次元動き信号、RCモデル、ドローンやロボットの移動システムを対応する人間の頭。
X-GYRO 1000の基本的なバージョンは、特別にFPV(ファースト・パーソナル版)でRCモデル用に設計され、それがメインストリームの送信機と完全に使用することができるか、または独立して無線高周波モジュール式のと同時動作させます。実際に同期を実現することができるように、ビデオ画像表示ゴーグル上の画面は、 ユーザーが見て回ることができたとき、それは、送信機に動き信号を転送することができ、および送信機は、(2軸上)頭の動きや頭の位置の信号を送信することができます彼は、RCモデルの内部であるかのように 。それが今日の市場での送信機と互換性があるので、使いやすいと簡単です。その最高の利点は、非常に複雑を利用する必要がある他の製品と比較して定常状態にあるとき、RCモデルの屈曲位置を確認し、測定するための任意の固定基準オブジェクトと全くドリフトを持つ必要がないことです参照施設または手動制御送信機。

仕様:

電源:12V DC電源に8V。一部
送信機、特にFUTABAのものは、トレーナーによって直接電力を供給することができます
コネクタ。 (例。T9Z、FF9C)。いくつかの送信機はのために、X-GYROに電源を供給することはできません
例14MZと12FG。最も簡単な解決策は、これらのRC送信機のための予備のバッテリーを使用することです。コネクタはすでにパッケージに含まれています。
サイズ:25mmX35mm
重量:20グラム
+ -90度/秒の回転速度運動:測定するための範囲。

デフォルト設定:

チャンネル:X axis-チャンネル7のY軸チャンネル8
探偵範囲G45度

送信機のための選択。
FUTABA:(FF-7、FF-8、FF-9、T9Z、T12MZ、T14MZ)

グラウプナー:(MC20、MC24、MX22)
多重送信機:(ロイヤルエボ、コックピットSX、mc4000)
JRおよびプログラマブル・チャンネルのない他の送信機:(9303、9X)
Product
Specifications

追加情報

  • 単位:
    HKX-1000
  • Brand:
    HobbyKing
  • 重量(g )
    125.00
  • 長さ
    188.00
  • Width:
    18.00
  • 高さ:
    99.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
not impressed with the tracking capability of this unit. add a 3 axis Accelerometer and Magnetometer. and you might have something worth buying.
Quality
Value
Overall
Quality
Value
Overall
When trying to use with the 9XR and Futaba plug, you have 2 choices solder some wires and hope, or the following. The Futaba plug has 2 ppm wires JR only uses one (HT only uses one) so simply open the radio, unplug harness for Futaba plug (right side) and unplug the JR plug (left side) and plug the Futaba port into that socket. This allows the HT to work with no soldering and no change in settings minus adding the PPM signals to the right channels. Other then that seems to work great and no issues on my Bix3.
Quality
Value
Overall
Quality
Value
Overall
Good little unit. Naturally I had to hack it... I pulled it out of the case and found that it would fin inside the tiny air space of a FatShark Predator V2 goggle. Added a 3.5mm jack and wired up the switch and glued it in place and Voila... a Predator goggle with built in head tracker. Works perfectly.
Quality
Value
Overall
Quality
Value
Overall
, , . .
Quality
Value
Overall
Quality
Value
Overall
This head tracker drifts very badly, it is fairly useless as you will be resetting the center every 10 seconds literally!
it is not worth a purchase
Quality
Value
Overall
Quality
Value
Overall
Got this up and running with the FrSky Taranis. The Taranis is a great match for the gyro, as it's got plenty of programming possibilities. It did require some soldering of a JR-style trainer connector, however not on a too difficult level.

For all those asking "does this work with radio X", check if your radio can assign custom channels to the trainer connector. If that's the case, it will work for your radio, but may require some soldering work. The two connectors shipped with the unit fit the 6-pin square connector and 6-pin large DIN which both are for Futaba radios.
Quality
Value
Overall
Quality
Value
Overall
I got one a while back, works with Hitec Eclipse 7 (72mhz) But now I use it with my Turnigy 9x (2,4ghz) You will need to re-locate the reset button to the transmitter because the drift is really annoying and you will be constantly resetting it. I wasn't impressed. I have the round connector spare if anyones interested. RC Groups - Headspin
Quality
Value
Overall
Quality
Value
Overall
Good headtracker but nothing is perfect.

Works perfect with my T9x
Quality
Value
Overall
Quality
Value
Overall
My gyro is drifting so much on one of the channels that it make it useless, I can only use it as a one axis gyro.
The soldering inside the gyro was very badly made with damage on the connectors.
The same thing in the Futaba trainer plug.
The reset switch is glued inside the plastic case. The same thing with the circuit board, it is only fixated in glue inside the plastic case.
I would not recommend this product.
Quality
Value
Overall
Quality
Value
Overall
, , , . .
Very poor quality gyros, the center is constantly going.
http://www.youtube.com/watch?v=I4z1UuUvgeI&list=UUcHik9X4FBffiInQk1LAnlw&index=1&feature=plcp&noredirect=1
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。