サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HobbyKing X525 V3グラスファイバークワッドローターフレーム600ミリメートル

Generating Links

HobbyKing X525 V3グラスファイバークワッドローターフレーム600ミリメートル

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,075.09
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9323000002
送料無料したい? クリックする こちらへ 詳細情報を参照する

HobbyKing X525 V3のクワッドローターフレームが到着しました!

HobbyKing X525のクワッドローターフレームは偉大なルックスとパフォーマンスの両方を提供しています高品質のガラス繊維フレームです。軽量まだ非常に剛性のガラス繊維とアルミニウムから構築された、X525は、軽量化と強度の優れた組み合わせを提供しています。

まだ優れた機能とパフォーマンスを提供しながら、X525の積極的なスタイリングは、それがよりクワッドフレームよりも凶器のように見えます!

このクワッドフレームは非常にうまくfinishedガラス繊維メインフレーム、衝撃吸収着陸脚折りアルミアームを備えています。衝撃吸収着陸脚は我々はすべての時から持っているそれらのラフな着陸を処理するのに最適な機能です。

空気中のクワッドを取得することが容易またはより手頃な価格ではなかったので、我々はまた、クワッドなどクワッドローター制御ボード、ESCなどの電子機器、モーター、より多くのフルラインを提供しています!

必要なすべてのハードウェアが含まれています。

仕様:
:600ミリメートル
モーターボルト穴:14〜30ミリメートル

必須:
マルチローターコントロールボード
15〜25AブラシレスESC×4
28-XX 1100〜1300KVブラシレスモーター×4
8×4〜9時間×5日間プロペラ - 2標準/ 2逆転


「ファイル」タブの下に位置してダウンロード可能なマニュアル。


注:
すべて HobbyKing Xシリーズのフレームは工場直接購入されています。私たちは、品質を確保するために、工場のエンジニアと緊密に協力してきました。すべてのXシリーズのフレームは、CNCカットであり、正確にローテク工場で手作業で掘削されたイーベイや中国のベンダーから入手可能な安価なフレームの多くとは異なり、粉砕しました。 Hobbyking Xシリーズも追加stengthための厚いGFメインプレートを備えています。

  • X525 Quadcopter Frame
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Ken | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2016

The quad frame is very nice. The assembly is realy easy, but you should have a look at the file section here. There you can find some pictures of assembled frames. There seems to be no assembly manual. I have used it to create a transportable quad frame. Realy cool foldable function. The frame has a landing gear with spring shock absorbers, but those are realy hard.
Using this frame with some 2212/920kv Motors, 1050 props and a kk mini 2.1 fc. Nice setup so far.

William D | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 26, 2015

I bought this to use it for spare parts for a kit I built and fly. The original kit was pretty abused until a KK 2.1.5 flight controller was installed and programmed. You can break motor mounts if the props hit the ground, the idea of using two mounts for strength sounds good. There is also a problem with the legs breaking motor wires if you land too hard, I rounded off the ends of the legs so they cannot protrude above the frame on hard landings. I didn't see much upwards bending of the arms until a heavier 5Ah battery was installed. It's not the arms that bend but the fiberglass inner frame they attach too. If I were starting over learning to fly I would mount a nice big piece of foam under the battery to reduce landing shock. Next time a 4 in 1 ESC will be used to minimize the number of tie wraps required. Make sure to balance your props well and if you can see motor shaft between the hub and the top of the motor shorten the shaft. That gap just creates a lever arm for any prop imbalance. For the price this frame can't be beat, buy two so you have spares.

orionrider | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2015

Excellent 'no-nonsense' frame, light and strong. The spring-loaded landing 'claws' are a nice feature, they look fierce and actually help cushion any bad landing. My kit was complete, no missing hardware.
Two tips: slide the springs on the axles before assembling the two halves and don't tighten the screws too much or you will bend the arms. Also, keep in mind that the motors on this frame are close to the ground so on take-off you need to promptly 'jump' to avoid ground effect turbulence which could push your quad all over the place. When it is at least 50cm high, it will be much more stable.
There is enough space under the quad for a 4S 5000mah battery and still sufficient ground clearance during landing.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 20, 2015

Cheap! So I ordered 2 for spare parts. Not really a beginner quad. It's large, and doesn't take light crashes well.

orionrider | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 12, 2015

Excellent frame, unbeatable for the money. I especially like the suspended 'claw-like' landing gear. Recommended 8" or 9" props look too small for this size of quad but you can fit 10" props (with a low KV motor). This frame is rather large so the bigger props fit easily.

Dave | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 08, 2015

As mentioned in the previous reviews, I bought 2 of these inexpensive frames and it was great advice. Being new to the quadcopter game I've had a few crashes and the spare frame has served well. Surprisingly I have not broken or bent any arms or the center of the frame, it's only been motor mounts and landing legs. I have had some big crashes too. This frame holds up well to hard landings. The only down side is the arms can move as its foldable and it can induce drift when the arm moves out of alignment after a hard landing. Still an excellent frame to begin with, It has exceeded my expectations.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 21, 2015

not bad frame, had to do some mods, the folding of the arms is a bad design, I had to mount the bottom body plate so that you could not fold the arms

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 01, 2015

One of the strongest frame that I have ever seen, the best one so far. The frame is not heavy compared to its size, using a 390Kv multistar motor, i get nearly 20 mins of flight time

HobbyKingAddict | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 15, 2015

Body was easy to assemble once I found the instructions in the file tab. Seems fairly durable. Should make a fun quad body. I am running 10 inch props, but you could probably run up to 12 inch props and be fine.

Janni | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 02, 2015

Nice and light weight frame, looks cool and does the job.

顧客ファイル
User Manual Download [3389]
X525 by Pamo Download [113]
X525 by Pamo Download [123]
X525 by Pamo Download [108]
No File Name Download [1621]
Motrax xcopter X525 Download [1904]
Motrax xcopter X525 Download [1904]
X525 by Pamo Download [206]
X525 by Pamo Download [225]
X525 by Pamo Download [212]
  1. 1
  2. 2
  3. 3
  4. 4
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー