サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Hobbyking X650Fガラス繊維クワッドローターフレーム550ミリメートル

Generating Links

Hobbyking X650Fガラス繊維クワッドローターフレーム550ミリメートル

価格:

Now save 節約 ¥0.00 ¥0.00

¥6,599.69
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9323000048
送料無料したい? クリックする こちらへ 詳細情報を参照する

Hobbyking X650Fを打つことができない価格で偉大なルックスとパフォーマンスを提供しています高品質の折りたたみア​​ームクワッドローターフレームです!軽量まだ硬質ガラス繊維とアルミニウムから構築された、X650Fは、軽量化と強度の優れた組み合わせを提供しています。

このクワッドは、簡単に輸送し、保管することを可能にする腕を折り曲げています。腕にも向き、ゴールドとブラックのための2つの異なる色であり、それは正しい方向に飛んであなたのクワッドを維持するのは簡単です。ガラス繊維ユニバーサルモーターマウントは、モータの広い範囲に対応し、通気ESCのような二重は優れた冷却を提供するマウント。

このクワッドフレームスポーツはあなたのほとんどのカメラを運ぶために必要な最低地上高を与える着陸スキッドを拡張しました。これは、デュアルレールカメラは添付ファイルをマウントしています。 (オプションのカメラマウントのため、下記の関連項目をご参照ください)

私たちは、このようなマルチローター制御ボード、ESC、モーターなど多くのマルチローターエレクトロニクスのフルラインを提供していますので、より簡単に、または空気中のクワッドを得るために、より手頃な価格ではありませんでした!

すべての必要なハードウェアが含まれている、ちょうどあなた自身の電子機器を追加します。

仕様:
重量:598グラム(フレームのみ)
:550ミリメートル
身長:265ミリメートル
地上高:155ミリメートル(フレームの下)、185ミリメートル(カメラがレールマウント)
モーターボルト穴:16〜30ミリメートル

必須:
独自の4チャンネル送信機と受信機
マルチローターコントロールボード
20〜40AブラシレスESC×4
3S 2200〜3000mAhのlipolyバッテリー
35分の28 900-1100kvブラシレスモータ×4
9〜11インチのプロペラ×4(2標準/ 2逆回転)

  • 500mm Quadcopter
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 30, 2016

This is a great multirotor! It went together with only a few difficulties. Don't try to build it without any instruction, google a build video to help you.

Zafir | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 28, 2016

very nice and quality frame, only one hole was 1mm away. Seems quite strong frame

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 23, 2016

I really love this frame. Easy to put together. Don't put together until you can add your electronics or you will be taking it back apart. I wish it was a little taller between the levels. Not enough room for most transmitters, receivers or electronics that are packaged in a plastic case. Buying longer spacers would fix that. Legs are a bit bouncy and if you land hard, you will bounce up in the air. Arms do fold in which help with transporting. Over all, Im very happy with it.

chaoz | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2016

war mein erster Multikopter nach einem Blade NanoQX.
Habe die Entscheidung nie bereut und wrde den Frame jedem Anfnger empfehlen. Allerdings sollte man als Neuling das Landegestell ab lassen und z. b. Moosgummi Kltze unter die Arme kleben.
Ist recht schwer aber dafr haltbar und liegt ruhiger in der Luft als ein voll carbon Rahmen.

Benutze den Rahmen jetzt fr Tests z. b. mit neuen Flight Controllern oder Firmware Versionen die noch im alpha Stadium sind .

Das wichtigste fast vergessen: mehr als genug Platz um schnell und unkompliziert ein Quad aufzubauen selbst mit allem mglichen an Zubehr

BoOmChAcCa | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 28, 2016

Great Quad.
Im yousing the tunrigy D2830 1000Kv Motors with 30a HK ESC.
10x4,5 Props and the Multistar 4000mAh Packs.
As flight controller I got the DJI Naza.
Geting about 7 Minutes of flight time with a Gitup GIT2 on it.
But you can mount two 4000mAh Packs for a few minutes more flight time.

Im flying it without landing gear for saving some weight.

I really recommend this quad for any type of use.

Dustin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 26, 2016

I love this frame! It is well built and has handled several moderate crashes. The only complaints I have are that my ESCs do not fit in the space beneath the motors and I've had a some of the screws rattle loose while flying. The legs are quite springy and give some added cushion on rough landings, but the spring makes it difficult to land without bouncing. There is ample space on the rails to mount additional hardware. I've mounted a raspberry pi, video tx, 5A battery and a fatshark pan/tilt/roll camera rig on the rails. Excellent frame!

Wenliang | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 24, 2015

the frame is well made and strong. works well with 1000kv motor, 30a esc, naza lite, fpv, osd, 5000mah 3s, 10x4.5 prop. crashed landing few times and still holding up.

jtaliaferro | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 21, 2015

This is really nice frame for the money. Using AFRO 30 ESC and AX 2810Q 750KV motors. Build was simple even though no instructions were included, I found them on the INT warehouse site.

lee | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2015

excellent frame, light but sturdy.
motor mounts are chunky and strong with no flex, much as is the rest of the frame.
As many have noted the legs are perhaps the only real flaw as their a little on the "light duty" side compared to the rest of the frame and tend to flex a little to much, that said they are still adequate enough to support the quad fully built a kitted out (minus any additional underslung gimbal).
That all said, my frame is currently fully kitted out and flying well with a full FPV setup on cheapo 1000kv outrunners and a dual battery rig without feeling the need to change out the landing gear for something more sturdy just yet (If the need arises there are plenty of low price options widely available to those that do feel the need)

ALL IN ALL, I heartily recommend this frame for LIGHT - MEDIUM lift builders (newcomers also as it can certainly take a few good mishandled bangs and survive... plus spare parts a readily available)

emre | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 30, 2015

good quality. easy to build. but landing gears are not that good, they start stretching even when there is only a battery on the quad. expect the landing gear it has a nice frame.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
顧客ファイル
Manual - Hobbyking X650F Quadcopter Fram Download [274]
No File Name Download [274]
No File Name Download [274]
No File Name Download [274]
No File Name Download [299]
Modified boom and engine mount so esc ca Download [1696]
FPV_X650F.jpg Download [1788]
FPV equipped X650F Download [1588]
Assembled with NAZA Download [3076]
DIY canopy Download [1308]
  1. 1
  2. 2
  3. 3
  4. 4
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー