新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

HobbyKing X930ガラス繊維Octocopterフレーム895ミリメートル

HobbyKing X930ガラス繊維Octocopterフレーム895ミリメートル

QTY:

Now save save AU$0.00 AU$0.00

AU$48.09
Stock:
重量:
1326 g
SKU:
9171000117

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

HobbyKing X930のoctocopterフレームは偉大なルックスとパフォーマンスの両方を提供しています高品質のガラス繊維フレームです。軽量まだ非常に剛性のガラス繊維とアルミニウムから構築された、X930は、軽量化と強度の優れた組み合わせを提供しています。

このフレームは、同様の構成とスタイリングをフィーチャーしたが、今オクト構成で、私たちの既に人気の「X」シリーズのマルチローターフレームから派生しました。これは、あなたが他のどこにもそれを見つけることができません意味HobbyKingの排他的です!

オクト構成の追加リフト容量は、このようなカメラシステムやその他の電子部品などのより大きなペイロードを運ぶため、このフレームに最適です。このため、優れたカメラリグまたは単に曲芸飛行のために非常に機敏かつ強力なマルチロータフレームのためになります!

X930は非常にきれいに仕上がっ2mm厚ガラス繊維メインフレーム、厚さ1mmの正方形のアルミニウムアーム、ヘビーデューティー延長高さのランディングスキッドと硬質ガラスファイバーモーターマウントを備えています。このoctocopterフレームはタフで深刻なペイロードを伝送する準備ができて構築されています!

私たちは、このようなマルチローター制御ボード、ESC、モーターなど多くのマルチローターエレクトロニクスのフルラインを提供していますので、より簡単に、または空気中のマルチローター航空機を取得するより手頃な価格ではありませんでした!

必要なすべてのハードウェアが含まれています。

仕様:
:895ミリメートル
モーターボルト穴16/19/25ミリメートル
フレーム重量:916グラム(ワット/アウトエレクトロニクス)

必須:
マルチローターコントロールボード
15〜25AブラシレスESC×8
28-XX / 35-XXブラシレスモーター×8
10〜12インチのプロペラ - 4標準/ 4逆回転
2650〜3600mAh 3〜4Sのlipoly
独自の4chの送信機/受信機

Product
Specifications

追加情報

  • 単位:
    9171000117
  • Brand:
    HobbyKing
  • 重量(g )
    1326.00
  • 長さ
    435.00
  • Width:
    75.00
  • 高さ:
    210.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
excellent frame let down by the lack of a second deck but that said its very simple to achieve with the use of a few stand-offs and for example a glassfibre battery carrier wich is what i used but for the pricwe EXCELLENT VALUE FOR MONEY WELL THOUGHT OUT VERY LIGHT FOR ITS SIZE BUT IT REALLY IS A TRUE BUILDERS KIT AND WHILST A BEGINER COULD ASSEMLE IT TOO MUCH IS LEFT TO THE BUILDER TO WORK OUT FOR EXAMPLE MOTOR AND PROP SET UP AND THE SECOND DECK ALL IN ALL EXCELLENT IVE SEEN THEM FLOWN WITH ANYTHING FROM A 2212 MOTOR UPTO A E600 FROM DJI
Quality
Value
Overall
Quality
Value
Overall
Ok where to start.....
Assembly - Instruction lol there are none unless you call a picture of the parts instruction.
It is pretty much straight forward however.
The fit is horrible! plan on using some epoxy and some extra fasteners on some area's.
I read on the International site that the motor mounts are the worst part.
I will use the stock ones but have found aluminum ones on EBay for like $35 for a set of 8
The directions show the mounts on top of the arms but the video and photos here have them mounted below..... I guess its preference but I may mount my mounts on the bottom.
I'm waiting on motors I plan on using Emax XA2212 820KV w/ 10or 11'' props.... I am going to try 2 EMAX 4in1 ESC's but may switch to individual ones if the don't work well.
I'll let you know how it flys when its all together... Oh and I have a NAZA Lite Flashed w/ V2 for a Flight Controller
Quality
Value
Overall
Quality
Value
Overall
WOW Riesig

Verarbeitung naja - ein bisschen hier und da nachschleifen musste schon sein
Quality
Value
Overall
Quality
Value
Overall
It's a cool frame, I'm pretty sure the only octocopter frame on hobbyking. The only problem I have with it is that the legs don't actually fit into the frame. I had to sand them down and they still barely fit in. Then on the bottom of the frame the little skid things are so lose they fall off every other time I pick the thing up. It wasn't a hard fix, some hot glue did the job as the only hard force they will be experiencing is when they get pushed INTO the frame, not out, when I land but it was rather annoying to have to sand and hot glue the thing together. Don't let this turn you off it, it's a great frame and I would buy it again, it's only just shy of brilliant!
Quality
Value
Overall
Quality
Value
Overall
Incredible frame for the price! I have about 10 flights now and here is what I have seen: motor mounts need reinforcing....I built my own by tracing the original mounts on aluminum plating and cut out...soo much better. The originals began vibrating and flexing. I could see cracks forming so better safe then sorry! While assembling the frame I wish I had used glue as well because skids and legs are beginning to loosen. The skids IMO need to be wider and longer....if the ground isn't perfectly level the copter can easily tilt over onto the props. I'm planning some more mods in the near future. Overall, great for what you are paying....just watch out on those motor mounts!!
Quality
Value
Overall
Quality
Value
Overall
This is an outstanding kit frame for the price. It's also HUGE! I'm pretty sure this won't fit in the trunk of my Audi without some dis-assembly (it's a small opening). It's slightly under 35 1/4 inches from motor center to motor center, or exactly 895mm. It's a bit difficult to assemble if you're mounting any extra carry gear (such as a camera/gimbal mount), only because 4 of the screws will require some finessing to get into place and tighten. This is something that should be addressed in a redesign. 5mm would make all the difference here. The landing gear seems a bit fragile, as do *all* low priced landing gear. I'd say there is enough clearance for a full sized DSLR, but my Nex 5t or n will fit without any issues. It might be time to get a van...
Quality
Value
Overall
Quality
Value
Overall
Ce cadre Octocoptre est un bon choix si vous voulez vous lancer dans la fabrication de votre octocoptre.
-
Lger avec sa composition en aluminium et fibre de plastique, il vous apportera un poids totale au dcollage acceptable pour un engin de ce genre.
Nanmoins, les pices plastique ne sont pas conu pour resister aux chocs.
Malgrs ca, cela reste un trs bon produit

This framework Octocoptre is a good choice if you want to start making your octocoptre.

Lightweight with its aluminum composition and fiber plastic, it will give you a total takeoff weight acceptable for a device of this kind.
However, the plastic parts are not designed to withstand the shock.
Malgrs ca, it remains a very good product
Quality
Value
Overall
Quality
Value
Overall
Ich habe diesen Rahmen vor ein paar Tagen herhalten und in sofort innerhalb 1h zusammengebaut. Die bebilderte Anleitung ist mit etwas Fantasie sehr gut zu interpretieren. Die Akkuhalterungen im Landegestell sind eine gute Idee, vielleicht sollte aber darber nachgedacht werden eine Befestigungsmglichkeit nher am Schwerpunkt anzubieten. Leider haben die einzelnen GFK-Teile nicht zu 100pcnt ineinander gepasst, so war an einigen stellen nachschleifen ntig. Wenn alles zusammengesteckt ist sollten die Teile auf jeden fall miteinander verklebt werden, da das Landegestell sonst doch etwas instabil ist.
Das grte Manko sind die Motorhalterungen am Ende der Ausleger! Sie sind so labil, dass durch die vom Motor verursachte Vibration den ganzen Copter in schwingung versetzt - hier herrscht akute Absturzgefahr!!! Habe die Halterungen weggelassen und die Motoren direkt auf den Aluminiumausleger montiert und sieh da: keine Schwingungen - keine Gefahr.

Alles in allem finde ich trotzdem das das Preis-Leistungs-Verhltnis stimmt!
Quality
Value
Overall
Quality
Value
Overall
Nice frame, cool for octo. but without retract arm, so its quite difficult to store.
Quality
Value
Overall
Quality
Value
Overall
I recieved my X930 rather fast and building it was a breeze! (Thanks to my wifes emory boards haha!) I had to sand a couple slots but nothing i couldnt handle. Can't wait to order my motors!



One thing i noticed tho... In the main product picture, the motor mounts are installed UNDER the boom arm BUT the instructional exploded view shows them installed above the boom.



My instinct tells me that under the boom would be stronger than above. Am i right? Probably! Really excited to start filming my X930!!! (yes i typed that correct - i will film the copter flying as well as film WITH IT!) :)
Quality
Value
Overall
View all reviews
Upload
Videos
  • HK X930 Octocopter

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。