新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録

HobbyKing®FlybeamナイトフライヤーEPP LEDシステム1092ミリメートル(KIT)/ワット

HobbyKing®FlybeamナイトフライヤーEPP LEDシステム1092ミリメートル(KIT)/ワット

Now save save AU$0.00 AU$0.00

AU$150.29
在庫切れ!
Stock:
OUT OF STOCK
重量:
2400 g
SKU:
9310000167-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

日中飛行する時間がありませんか?問題ない! HobbyKing®Flybeamの夜のチラシは、飛行の全く新しい次元を開きます。本製品の主な特徴は、翼端ストロボライトが付いているプリインストール、マルチカラーLEDシステムです。カップル安定した機体で、この照明システムは、超耐久性のあるEPP発泡成形し、あなたは完璧な夜のチラシの素質を持っています。それだけで別の高翼トレーナーのように見えるかもしれませんが、Flybeamは何でもあります。安定した超応答性のコントロールと寛容はこの夜にあなたの最初の進出のための完璧なスポーツアクロバットモデルにします。 LEDの複数の色は暗所で容易に配向するための明確なコントラストを提供するために使用されています。

このキットのバージョンは、LEDシステムプリインストール以外の未組み立てられています。これは完全にあなたがそれをしたい正確にどのようにあなたのFlybeamをカスタマイズすることができます。 Flybeamの組み立てが低い部分に部分的には超簡単なおかげでカウントです。すべてはあなたのFlybeamは仕事だけのカップル時間で飛行する準備ができ、語りました。

特徴:
•キットのバージョン - モーター、電子機器、およびバッテリの選択とFlybeamを組み立てます
•超タフな成型EPP発泡機体
•131高輝度LEDのプリインストール
•PCB LEDクイック接続ボード
•頑丈な、まだスタイリッシュなアルミランディングギア
•ウイングチップストロボライト
•操縦可能なテールホイール
•安定した、まだ完全には曲技飛行プラットフォーム

仕様:
翼幅:1092ミリメートル
長さ:898ミリメートル
フライング重量:1120グラム

必要なもの:
4+チャンネルトランスミッタおよびレシーバ
3S 11.1V 2200mAhのLipolyバッテリー
4×9グラムサーボ
30A ESC
4018のx 950kvブラシレスモータ
夜の時間

我々は、完全な選択持ってここにFlybeamスペアパーツを。

Product
Specifications

追加情報

  • 単位:
    9310000167-0
  • Brand:
    HobbyKing
  • 重量(g )
    2400.00
  • 長さ
    850.00
  • Width:
    220.00
  • 高さ:
    300.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice kit, easy to build and fly's great if you keep the weight down. Remove the landing gear and make it a belly-lander. Safes a good 70grams and makes it a real floater that does not stall. Use UHU-Por or Welder glue to build, and you have a very nice nightflyer. Payed 50 bucks for it at the sale! Check my flight test on youtube http://www.youtube.com/watch?v=YoQNsq0_4aU
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice kit with LED light, purchased during the half year sales good price for the set.
Easy to install with large compartment inside the fuselarge. Installed with the original 950KV motor and propeller with 3s lipo, good stable flight during take off and landing. Can be use for beginner trainer, very easy flight handling witht he slow KV motor.
Advance pilot may feels too slow, can install with higher KV motor and larger battery, but will need to shift the CG 2~4cm back from the motor mount with larger battery pack. The CG is just nice using 3s 2200mah install behind the motor mount, very little trim with 3s lipo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have over 30 planes and jets, and this is the first time I had a plane's wings fold and rip off during flight. I bought this plane to fly at night as a novelty and it took off just fine, and then the left wing folded up and ripped off mid flight causing the plane to spiral to its demise. The wings are connected to each other by glue, then held by screws at middle intersection, and it comes with a wood spar that only runs 8 inches and I also added a long piece of carbon fiber and it still folded and wripped off ten seconds after flight. I have read on forums this is common for this "flybeam" plane and that you can't go more then half throttle without the wings bending, but had I known beforehand I would have stayed away.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered the KIT version, because in my experience RTF kits come with low quality servos, ESC and motor which I end up replacing. I am really impressed with the quality of this KIT for several reasons:
1. it is made of high quality EPO (yes, I know the manual and description state EPP, but it is NOT EPP - I have 5 EPO and 4 EPP models so I know the difference).
2. the led system is also very high quality, and comes with a handy connecting board that even has electronic fuses built-in.
3. the overall design is excellent. I was afraid the installation of the led system would weaken the overall robustness and stiffness of the model, but it is designed in such a way that the led strips made the model stronger!
4. The leds do add weight, but the model should not be overweight if you use the right components. Withleds (but without other electronics)the model weights: wings:250 grams, fuse (inc tail) 300grams, undercarriage (incl wheels) 70 grams. My estimated AUW incl a strong motor and 3S2200 batt is 1000 grams which is OK for a 110cm span plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • HobbyKing® Flybeam Night Flyer EPP w/LED System 1092mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。