新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

HobbyKing®™ブラシレスカーESC 10Aリバース/ワット

HobbyKing®™ブラシレスカーESC 10Aリバース/ワット

QTY:

Now save save AU$0.00 AU$0.00

AU$15.07
Stock:
重量:
25 g
SKU:
913000001

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

正逆と、このようなタイミング調整や破壊などの機能の良い範囲で、標準的な10Aの車のESC。モータの広い範囲をサポートします。非常に信頼性の高いです!

特徴:
低電圧を含む完全な保護機能は、過熱、スロットル信号は、スタートアップを失いました
保護とセルフチェック。
センサレスブラシレスモータに対応。
優れた起動時のパフォーマンス、線形および迅速なスロットルレスポンス。
最高モータ速度240,000RPM(2極)、80,000RPM(6極)および40,000(12極)をサポートしています。
プログラムカードで簡単に設定でき。
システムが自動的にスロットル中性点を検出することができ、かつニュートラルレンジは調整可能です。
異なる環境のための3つの作業モード。
4段階の逆力調整
5ステップは、力調整を開始します。
3段階の制動力調整
5段階のドラッグブレーキ力調整、
4ステップ初期制動力調整。

仕様:

入力電圧:1-2Sリチウム電池/ 3〜8のNi-XX
続き電流:10A
BEC出力:1A / 5V(リニア)
サイズ(長さ×幅×高):22x17x7mm
重量:8グラム

Product
Specifications

追加情報

  • 単位:
    913000001
  • Brand:
    HobbyKing
  • 重量(g )
    25.00
  • 長さ
    119.00
  • Width:
    10.00
  • 高さ:
    80.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Work with arduino. Perfect for micro robot.
Quality
Value
Overall
Quality
Value
Overall
Good little ESC. Quick to go between forward and reverse - a good upgrade for the losi micro range of cars
Quality
Value
Overall
Quality
Value
Overall
little devil it is. Works fine on small selfprinted (3D) car. LIKE
Quality
Value
Overall
Quality
Value
Overall
Works great in a losi micro crawler. I have it paired with a single and two cell and the 4500kv motor from hobbyking. Killer mix and nothing gets hot at all. Easy to use and amazing performance.
Quality
Value
Overall
Quality
Value
Overall
I just got a couple of these for an RC boat project (a micro 3D printed tug).
Programmed it with the "HKProg-card". Hooked it to a 16g hextronik 1700kv outrunner on one end and a 1S 1200mah round nanotech LiPo on the other end. Works great. Motor start is surprisingly smooth and throttle response is very linear. I assume the bad reviews were defective items.

Overall It looks like it is going to fit my needs.

Note: no connectors on either the battery or the motor side. Comes with a standard size servo plug though.
Quality
Value
Overall
Quality
Value
Overall
this is one bad little esc !!! ive got it on my losi micro truggy with a 2s lipo and it will fly know !!!
Quality
Value
Overall
Quality
Value
Overall
ideal for the micro car 1cell
Quality
Value
Overall
Quality
Value
Overall
Ich habe den Regler fr das Sumpfboot Swamp Dawg gekauft funktioniert sehr gut und ist sehr gnstig. Auch wenn auf dem Bild es so aussieht als ob nur Brushed Moteren gehen, das stimmt nicht es geht Brushless.
Da hat Hobbyking ein falsches Foto reingestellt.
Es sind KEINE Stecker dran diese mssen dazu gekauft werden.
Quality
Value
Overall
Quality
Value
Overall
I also recently purchased this esc it is great I have installed this esc on a losi micro rally with the large pinion on 2s Turnigy nano-tech 180mah 2S 25~40C Lipo Pack with a turnigy 4500kv and a VSD-6 servo this combo works great the motor plat will need to be modified in order to install this motor on the stock motor plate but was simple and easy the servo fits easy but is a little to small though so I used double sided tape to secure it in place servo tape would have worked better, this esc and motor combo on 2s will also work great on a losi micro dt/raminator/high roller/t/Baja with the large pinion you will also need to modify the motor plate in order to install this motor. thanks hobbyking for the great products. motor temps are always cool and same with this esc I get about 20 min run times with the 2s I mentioned befor.
Quality
Value
Overall
Quality
Value
Overall
Working excellent with an 8750kv motor on 3s (Yes, it works) for a losi micro DT and don't forget to buy the programming card for adjust the lipo cut-off...;-)
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。