新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

Hobbyking™4 - ブレードプロペラ7x3.2ブラック(CCW)(1個)

Hobbyking™4 - ブレードプロペラ7x3.2ブラック(CCW)(1個)

QTY:

Now save save AU$0.00 AU$0.00

AU$2.03
Stock:
重量:
25 g
SKU:
OR001-01001

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

4ブレードEPプロペラ7x3.2 / 170x80mm(ペア)
スーツは、シャフトを2-2.3mm。

Product
Specifications

追加情報

  • 単位:
    OR001-01001
  • Brand:
    HobbyKing
  • 重量(g )
    25.00
  • 長さ
    190.00
  • Width:
    23.00
  • 高さ:
    157.00
  • ピッチY (インチ)
    3.20
  • 材料
    Plastic
  • 回転:
    CCW
  • Unit Weight (g):
    いいえ
  • タイプ
    Normal
  • ブレード数
    4
  • 直径X (インチ):
    7.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
this propellers have not 3.2 pitch more likely 5 or a 6.
My test with 210 W 1400KV motor 3S battery the power input was around 290W .
From the eCalculator it should be 180W. Calculated with 6 pitch the result is 265W.
The Static Thrust was around 450 grams, but it should be 750 grams.
Quality
Value
Overall
Quality
Value
Overall
These are the few and far between 4-blade props. They are a little more flexible than desired and may unload more than expected in the air.
Quality
Value
Overall
Quality
Value
Overall
they are perfect. And the power is really big. My depron flys vertical with not more than 2/3 of power. ( 230g 1000mah 7,4V ). They could be used for twin engines planes. It could be good if you had pair with normal and counter rotation. )
Quality
Value
Overall
Quality
Value
Overall
These things have great promise with a bit of engineering, chop off the front dome of the spinner and bore out the plug to fit a prop adaptor.

Use a two bladed spinner and cut out two extra slots then mount on a CF2805 or bigger and hold on tight! sounds great and loads of bite from those paddle blades.

Have one mounted on a 21'' span Sea Fury I am just finishing and really looking forward to getting it into the air,



regards,
Quality
Value
Overall
Quality
Value
Overall
I bought it for my Transal. Its a very good prop. with good quality. Needs about 13Amps with the "TURNIGY 28-30-azj 14A 1100Kv Brushless Outrunner" and a 2200mAh 3s Lipo.
Quality
Value
Overall
Quality
Value
Overall
Very nice propellers,



run 2 pairs on with the KV1500 24g outrunners on 2S 800mAh packs for a scale flying boat and a acro flyign boat and get up to 17min flying for the scale ship and 8 for the acro bird with very high performance !



They grey conical adaptor is drilled out to fit the prop shaft and glued to the propshaft, the props are stll press fitted to teh adaptor and it works perfectly even at high power.
Quality
Value
Overall
Quality
Value
Overall
Very cheap and good props. I have one on a depron spitfire on a homebuilt CD-rom. Just as Terence says, you have to modify it a bit. Original it has some sort of push on system. I also cut of the dome and now it fits a standard propsafer with a rubber band! :D
Quality
Value
Overall
Quality
Value
Overall
whitc tipe of motor for this prop. ,please i crazy for this 4 blade
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。