サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Hobbyking™EPPミニエッジ540T(グリーン)3D ARF

Generating Links

Hobbyking™EPPミニエッジ540T(グリーン)3D ARF

価格:

Now save 節約 ¥0.00 ¥0.00

¥11,155.33
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9420000004-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

きちんとプロファイル間のすべてのフォームのモデルと完全にビルドアップバルサ3Dモデルを下回ると3D飛行の世界につま先を浸すための素晴らしい方法です有名なエッジ540曲技飛行機の見栄えやハンディサイズのセミスケールモデル、またはちょうど出かけ、と爆風を持っています!

モデルが作る合板や炭素繊維ビルドアップ構造上にEPPのスキンを備え、それ保持スケールが完全に区分さカウリング、湾曲した天蓋付きに見える一方で、日常の飛行のマイナーノックを一笑に付すために必要な強力かつ柔軟な超軽量、対称エアフォイルと滑らかなライン。

540Tは、すべてのモデルの能力の範囲内で、ブレンダーやハリアーを、超軽量機体は小道具ぶら下げて、飛んで、すべてのアウト3Dに飛んで活気のあるスポーツから何かすることが可能と組み合わされ、巨大なコントロールサーフェスを持つスピン、宙返り。

良質のハードウェアパックはサーボ、受信機、ESCとモーターのあなたの選択のための準備ができて機体を完了するために必要な部品のすべてと、含まれています。

HobbyKing™エッジ540Tは、機会があれたびに、一瞬の通知で飛行する準備ができるように、モーター、バッテリー、ラジオのギアへのアクセスが良好と一体のモデルを構築するために迅速です!

特徴:
•完全にビルドアップEPP /合板構築胴体
•プレ形成されたワイヤのランディングギア
•完全に区分されたカウルと天蓋
•対称翼形
•オプションの横力発生器が含ま
•強力な、1ピース構造

仕様:
翼幅:935ミリメートル
長さ:995ミリメートル
フライング重量: 電池との630グラム

含まれています:
エッジ540T EPP /光合板ARF飛行機
すべての必要なハードウェア
組立説明書

必要なもの:
独自の4〜6CHの送信機と受信機
9〜14グラムのサーボ×4(メタルギアデジタルサーボ推奨)
22〜28ミリメートルのブラシレスアウトランナーモーター(900〜1100KV)
30〜40AブラシレスESC
8〜10×4.7プロペラ
1000-1300mAh 11.1V(3S)LiPolyバッテリー

  • HK EPP Mini Edge 540T
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Claudio | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good easy plane

Mar 19, 2017

This is my first foamy plane and I am very happy with it: easy to build and good hardware included. I fly aerobatics (no 3D 'cause I don't like it) easily with slightly reduced control movements and 20% expo; does all I can try in calm days. I use the recommended setup with a 10x6 propeller and 1300 mA batteries and I get more than 6 minutes flight time. It is also very sturdy in hard landings and inside the car. Overall I am satisfied, I don't give 5 stars just because I still believe that the price is a bit high for a plane made of foam, but for all the rest I highly suggest it for easy Sunday flying!

matthew | 確認済みの購入者

  • Overall
  • Quality
  • Value

Awesome plane.

Feb 15, 2017

Great plane, fantastic wing loading. Great in stall flight.

Aleksander | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 25, 2016

This plane is absolutely gorgeous!!! I can honestly say I have never flew a plane which is more stable and flying with ease. Build is nice, overall quality is very good, all parts fit together neatly. Also designers has strengthened the constructions with carbon and wooden bars so joints, rudder etc. are tough and do not bend easily like other foamies I have had. There is simply nothing more I can ask from a foamie for this money.

My setup is Turnigy SK3-2836-1040V with 10x5 APC style, ESC - HobbyKing YEP 30A, 4x Turnigy™ MG90S and a 3S 1300mAh Turnigy nano-tech. With this configuration the plane is 714 g. The motor has plenty of power and I fly 3D with quite a lot of hoovering, harriers and rolls for 8 mins. If one go extreme 3D (I am not there yet) one should be able to fly at least 5 mins with this configuration. I will probably upload a video, but in any case I would highly recommend this product for a second 3D plane ( I started with Hummer 3D)

kevin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 30, 2016

i was intrigued by the construction of this plane and i was looking for a low wing plane, i had selected the 2826 motor and had 1300mh batteries, with that motor and the recommended prop size for the motor it was very under powered i ran a larger props 8x6 and 9x4 which helped but flight times were very short, the 2830 would probably be a better choice, in the end i went big with some mod's put a 3536 motor, 10x5 prop and 2200mh batteries(had to locate under the wing to get good cg), and it flys like a beast with long flight times.
only issue i had putting the plane together was the tail would not fit in the slot as the directions indicated, i had to put a slit in the very end of the tail to slide it in.

In the end this is a pretty sturdy plane, the design is spot on and flys very true, once trimmed and cg is correct,rapid roll rates, tight loops, it will maintain heading with hands off stick

Ulrich | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2015

Now the second part of my review.
Great!!! This plane has fantastic flying characteristics and is a perfect small 3D trainer.
I fly mine with a 1400 KV motor on 3s with a 10x5 or 11x5 prop. I use 3s 1250mAh up to 2200mAh. With the small accu you have a lively 3D modell that makes a lot of fun! But also with the 3s 2200 mAh lipo the plane can manage the 3D maneuvres terrific. Highly recommended!

Ulrich | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 11, 2015

The rating depends on the quality and assembling! Not flown the plane yet.
Flying weight is 700g with a 3s 1250 mAh 30C. If you use lighter servos you maybe can reach 680g. The promoted 630g are not possible with a kit like mine.
One side of the wing in my kit wasn't glued correct. The cover foam layer bends and the parafoil doesn't fit therefore. Very annoying.
The fuselage was twisted, so the wing and the elevator are not parallel. No servo extensions in the kit. The linkage is weak and I changed them with ball heads.

Lauri | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 23, 2015

Really great 3D training plane. Flies little more like balsa planes when compared to flat fuse designs. Assembles easily, flies well, is quite compact and easily taken with you for quick flights.

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー