HobbyKing™フォッケウルフFW-190ウォーバードEPO 1600ミリメートル（PNF）

• Overall
• Quality
• Value

Replacement parts

Nov 21, 2016

Propeller/Spinner Set: SKU: 9306000179-0
Scale Accessories: SKU: 9306000175-0
Screw Set: SKU: 9306000176-0
Drop Tank Mounts: SKU: 9306000174-0

• Overall
• Quality
• Value

Customer Rated

Aug 10, 2016

This plane looks really good!! But there are some things where you should lay your hands on before flying. I have changed the retracts and legs for better ones. Also the rudder and elevator servo's are bad quality, so i have changed those for digital (4Kg) servo's. I use a 6 cell 3700 Mha zippy 25c battery all the way up in the nose. It fits well and the C.G. is perfect. She looks great on the field and much better in the sky. Its a real "head turner". To bad the price is that high...

• Overall
• Quality
• Value

Customer Rated

Mar 22, 2016

Nice plane. Fly easy and realistic. Handles well some wind.
I had do unscrew the retracts, redo some holes to rescrew them and fill some oil. No more trouble.
One wing touch the runway and it flip over. The wood spar between them broke immediately. I expected for that...
I have to fix it and add some carbon rods where the wing meets the fuse. CG at 100mm seems good.
Tested with 6s3300 and 7 minutes fly. Not bad

• Overall
• Quality
• Value

Customer Rated

Feb 17, 2016

Managed to pick this up in the sale hence five stars for value, I definitely wouldn't want to pay full price but then I wasn't looking to buy anything like this.
The retracts are very low quality, they have a central controller and mine just didn't work. replaced them with servoless retracts from the scratch and dent tab at about 6 quid and all is well.
Rest of model is good quality, nice finish, nav lights are of no real use over twenty feet away but look well enough on the floor.
This model really excels in the air, fly's beautifully, looks very convincing, even sounds good. The prop is incredibly tough, power train is adequate, detail parts break very easily but can be removed for transit, (guns, steps and pitot).
No real bad habits, lands easy at tickover, takes off in 10 feet, not especially prone to tipping, its no 3D bird but fly's on rails and easily exceeds scale performance.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 16, 2015

A very good looking plane and got nice comments from all who have seen it. the only short coming is the landing gear, I am going to maybe change it.

• Overall
• Quality
• Value

Customer Rated

Dec 06, 2015

I bought one of these on the recent sale and am very happy with what I got for a very reasonable price. Finish an presence of the model is really very good. I will be installing proper hinges everywhere for better movement and durability. Servos and ESC all work well. At the price despite the retract problem I think it deserves 4 stars.

Yes of course the retract controller board does not work properly. The retracts themselves work fine. Just provide power first one way and then reverse polarity and up and down they go. There is simple and low cost solution suggested to me by a fellow club member.
Take the circuit board out of a pair of unused or even new HobbyKing cheap retracts that have a circuit board and install it in line from your receiver to the retract. Use the wires that would go to the motor in the retract into the connector on the retract by adding a plug. I have tried this with a servo tester and they work just fine. I will install in the plane with a small separate battery pack to power the retracts to avoid flattening the flight pack should a servo jam etc.

• Overall
• Quality
• Value

Customer Rated

Aug 23, 2015

Nice kit for the price, excellent rendition of the FW-190 with nice details and scale accessories. Electronics works well, four digital servos in the wing, two large size analog servos for elevator and rudder. Large esc is good size made by well-known quality brand Hobbywing, and so is the 8A bec. Electric retracts work flawlessly (if you plug them in correctly), landing gear is big and sturdy. Large motor on 6S motor delivers adequate power, scale 3-bl prop with scale spinner is fairly balanced and looks very good on the model. Only disadvantage so far is no spare parts in sight. Five stars.

• Overall
• Quality
• Value

Customer Rated

Apr 04, 2015

Hi, I was disappointed in the overall quality, compared to the of some of Hobbykings other products. The moldings, fit of control surfaces etc is very poor. At the price I paid a year ago, it was only fair value at best. Todays price represents very poor buying. It flies nice, modest power, looks very good in the air. I love what Hobbyking do, I have plenty of their products and will continue to buy from them, some items are better than others, just the way it goes, this one is only 'so so'.

• Overall
• Quality
• Value

Customer Rated

Aug 26, 2014

This plane really could have been great with just a little more effort in design and manufacturing!

Almost...

"The HobbyKing Focke Wulf FW-190 is molded in all EPO foam and has a host of features that will make any scale enthusiast happy."
Come on guys!

For me personally, I would have paid more for better quality components and better scale features.

Surely it isn't that difficult to source components that are even remotely scale if you are going to the trouble of making a product that would make any scale enthusiast happy in the first place.

Or if it was offered as an airframe without the questionable hardware and at a reduced rate.
I for one would have bought an unpainted airframe and a decal sheet. Just a thought!
Mine came with one dead flap servo and one dead retract. I would have liked to have flown it at least once before replacing the poop electrical hardware with better quality.

Well it is a 1600mm FW 190 after all and as no other manufacturers are doing it, that is attractive and for me a must have.
It has potential and hopefully it will be worthwhile to spend some more time (and more money) on to have a menacing big butcher bird at the field.

• Overall
• Quality
• Value

Customer Rated

Aug 24, 2014

Hi there. I have purchased the HK FW1600. Right out of the box, the retracts didn't work. A mate also purchased this model and had a faulty servo and a fault retract. Has anyone experienced any problems with the retracts and does anyone know what other brand retract make/model can replace these? I note that the gear shaft closes on opposite side of the motor.