Become a Dealer ブログ
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HobbyKing™グッピーミニスロープグライダーバルサ1165ミリメートル(KIT)

Generating Links

HobbyKing™グッピーミニスロープグライダーバルサ1165ミリメートル(KIT)

 
価格:

Now save 節約 $0.00 $0.00

$42.77
購入済み Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
9419000005-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

HobbyKing™グッピーミニスロープは、スロープグライダーに入るためにお探しの方にぴったりの鮮やかなモデルです!ヨーロッパのデザイナーMitjaエルマンと協力して、グッピーはレーザーカットバルサキットとして利用可能になりまし素晴らしい斜面モデルに洗練されています。それはあなたがそう選択した場合は、この電動モデルを作成することを可能にする取り外し可能なプラスチック製のノーズコーンを持っています。

あなたが前にバルサキットを構築したことがない場合、グッピーはそれがちょうど約誰でも取り組むことができることは十分に簡単です。低部品数とシンプルさがビートすることはできません構築します。

モデルを完成するには、CA接着剤、被覆材のロール、サンドペーパー、hobbyknifeいくつかの他の各種ツールに加え、すべての電子機器が必要になります。低部品数で、全体の機体は夕方に構築することができます。第四夜は、電子機器を設置して、別の夜のサンディング、別のカバーをお過ごしください。これは、一週間の下で意味し、あなたが自分で作成したモデルを持つことができ、あなたがそれを好きなようにカスタマイズされました。

HobbyKing™グッピーミニスロープキットはまだ簡単に、より高い風を扱うことができる偉大な軽いリフトスロープモデルです。モデルは小さな箱に収まるように簡単に打破することができるように、周りの梱包、または完全に風が右である場合のために組み立てておくことは容易です。また、プラグとして利用可能と飛ぶ、構築されたバージョンを事前。

プラグアンド利用可能なバージョンを飛ぶこちら

特徴:
•キットのバージョン - すべてのレーザーカット部品、シート、およびハードウェアを含みます
•フォト図示の命令が含まれています。
•スーパー楽しい、光光の傾きモデル
•斜面のために設計や電力に変換することができます

仕様:
翼幅:1165 ​​ミリメートル
長さ:710ミリメートル
ウィングエリア:13.4dm²
機体重量:180グラム


必須:
2+ CHの送信機と受信機(マイクロレシーバを推奨)
2×9グラムマイクロサーボ
4.8〜6V受信機のバッテリー
UBEC /電圧レギュレータ(2S lipoly受信機のバッテリーを使用している場合)
被覆材料

  • Guppy Balsa Slope Glider
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Thomas | 確認済みの購入者

  • Overall
  • Quality
  • Value

Nice little slope soarer

Nov 16, 2016

The Guppy is a nice and small slope soarer but you need to improve this little bird at some places. The push rod for the elevator needs to be fixed for not getting loose, the front wing attachment has to be reinforced and it's better using two separate servos for the ailerons.
I'm using 3 pieces of TGY-D56MG (SKU 9399000023-0) and it's same weight as using the 2 stock servos. Also perfect for direct use of a 2S lipo with about 600mAh. This plane is not for beginners!!! Cheers - Tom

coconutheed | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 04, 2016

The main downside with this kit is the lack of instructions and plans required to build the kit. The can get away with no plans but the instructions have to be very clear and can not miss out important details. The instructions you receive as part of the kit is a series of pictures which a way to small to see and when there is an important stage the instructional picture is split into 4 even smaller picture that you have no chance of focusing on.

I also received the kit with missing stock balsa for the underside of the glider. If I knew there wouldn't be any then I would not have bought this kit as it would be over priced. This again comes down to poor instructions as I don't have a checklist to check if all the parts are in the box.

You will enjoy the final product but be aware that it is a very small glider. More details on a motor conversion are needed in the kit as it does say it can accommodate a motor. I would also appreciate the layout of the electronics and how to install servos into the wing/fuselage.

I know that people say to expect this from Hobbyking but I have always received great products in the past. This is so close to a five star review, its just the poor instructions that have such a big impact.

maximilian | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 08, 2015

This is a great sloper with a couple of modifications. I read bad reviews about the built kit and it is understandable, when you build it you can do the right modifications. Where the wing attaches to the front of fuselage is to weak, one bad landing and it will break. The nuts for the trailing edge don"t stay glued, all i did was create an index for the wing and use the good ole 2 rods and rubber-band trick. The rear elevator control is tricky, i just bent the wire around the small horn and did my adjustments at the servo. I also attached a motor and folding prop because the weight needed to balance the plane is the same as a motor and ESC so why not!!! I guess what i am saying is you need some experience building. Flying the plane is a dream i love it, has a nice range from slow to fast. This plane has no rudder but you can modify that pretty easy, personally i think you don't need one on this model. Cant wait to fly it again!!

Greg | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2015

Overall a good kit. Fast and easy to build.
Biulding the kit:
1. A little skill is required to form the leading edge, wing tips and tail.
2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.
4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.
5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.

Flight:
1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.
2. Inverted flying is not very good due to the flat wing bottom.
3. Does not require very much lift in light conditions provided that you keep your speed up.
4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.

Overall, a fun and handy little plane

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 22, 2015

Overall a good kit. Fast and easy to build.

Biulding the kit:

1. A little skill is required to form the leading edge, wing tips and tail.

2. The wooden pieces for the wing mount nuts are weak - I set these in epoxy putty with a carbon strip under the supplied former with good results. 3. If you are not going to add a motor, form the nose out of balsa. The same goes for the canopy. These are only flimsy plastic.

4. Glue a piece of ply to the fuselage behind the wing to keep it pressed against the forward bulkhead - otherwise, the two tabs that hold the forward part of the wings are easily dislodged.

5. The plane is small, so use a color scheme that makes it easy to see in all directions and inverted. I used clear red on the underside of the wings, tail and fuse, clear yellow on the top of the wings.



Flight:

1. Add weight if it is windy and there is good lift. There is space next to the elevator servo. Make a lead block that fills the whole space and fasten it with a screw through the side of the fuselage.

2. Inverted flying is not very good due to the flat wing bottom.

3. Does not require very much lift in light conditions provided that you keep your speed up.

4. The plane is not very big and is relatively fast, so don't blink when you are doing a fast, low pass.



Overall, a fun and handy little plane

顧客ファイル
guppy wing Download [43]
guppy Download [51]
guppy Download [51]
guppy tail Download [48]
reinforced guppy wing Download [35]
guppy wing tape joint Download [39]
wing reinforcing Download [9]
wing reinforcing 2 Download [248]
guppy Download [51]
carbon reinforcing Download [35]
  1. 1
  2. 2
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!