Become a Dealer ブログ
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HobbyKing™ミニDLGプロエルロンバルサ/ワット - パープル990ミリメートル(PNF)

Generating Links

HobbyKing™ミニDLGプロエルロンバルサ/ワット - パープル990ミリメートル(PNF)

 
価格:

Now save 節約 $0.00 $0.00

$146.42
購入済み Discontinued Product

Please continue searching for a similar product.
1 year warranty
SKU:
9419000007-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

エルロンとHobbyKing™ミニDLGは、伝統的なキットを構築する手間と費用をかけずにDLGグライダーに入るためにお探しの方にぴったりの鮮やかなモデルです!すべて倒すことができない価格で、大きさ、優れた施工品質と事前組み立てのハイレベルの小!

炭素繊維強化翼はバルサから構築され、水平方向と垂直方向のスタブがそうであるように、超軽量フィルムで覆われています。取り外し可能な胴体ポッドが光層とプラスチックの組み合わせから作製され、一方、ブームは、炭素繊維で構成されています。このすべてが組み合わされ、優れた飛行性能と超軽量モデルのためになります!

ミニDLGは、すべてが事前に取り付けられた翼、胴体と尾、事前に組み立てられただけでなく、サーボセクション、プッシュロッドとコントロールホーンに到着しました。箱を開けた後、あなたは、単に翼、横刺しでボルトと、独自の受信機/バッテリーをインストールする必要があります。

特徴:
•優れたビルドの品質
•事前組み立てのハイレベル
•超軽量バルサと炭素繊維構造
•一枚の翼と水平尾翼のボルト・オン
•サーボ、プッシュロッドとコントロールホーンは、事前に嵌

仕様:
翼幅:990ミリメートル
長さ:750ミリメートル
ウィングエリア:11.16dm²
フライング重量:160グラム (windier日間バラスト重量を追加することができます)
サーボ:3×3.6グラムの マイクロ

必須:
最小2CHの送信機と受信機(マイクロレシーバを推奨)
4.8〜6V受信機バッテリー(推奨25グラム未満)
UBEC /電圧レギュレータ(2S lipoly受信機のバッテリーを使用している場合)

*注:UBEC / VRなしの受信機に直接実行している場合はレシーバーのバッテリ出力電圧が発生することがありますサーボに損傷を与えそうでない場合、6Vを超えてはなりません。

  • 翼幅(ミリメートル) 1500.00
  • Mini DLG
  • DLG near Fladungen Germany
  • DLG near Fladungen Germany
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Silver | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2016

It's fun to fly on a sunny day and the quality is quite good for the price. I also own the Mini DLG without ailerons and this version doesn't stay in the air as long, but it's much faster and can do more acrobatic turns. The servos aren't quite precise enough, but they're fine if you aren't looking for best performance. As with the regular Mini DLG, I would suggest putting at least some tape around the tail boom just under the wing, because it can easily develop cracks. I fly this with a 180mAh 2S LiPo, 5V regulator and the FrSky V8FR-II. I have to put some more weigh in the nose to get the CG just right.

Andrejs_LV | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 10, 2015

Flights perfectly, easy to assemble, perfectly fits 2S 300mah battery with voltage regulator.

Eric | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Dec 02, 2015

The mini-DLG is an excellently constructed model with absolutely no faults at all and so I cannot therefore agree with the comments about poor construction and weak boom mounting . This model needs to be looked after and not be subjected to heavy landings - it's not made of foam, it's made of balsa, film and hard plastic so it needs to be landed gently, as all DLGs should be . To help slow the model down for landings I have set up the ailerons to droop using the throttle function as suggested in the Daily Video and it action works very well . This model is more compact than my other DLGs and so it is handy for flying in smaller fields, slopes and sea walls . The model arrived this evening and I completed the radio installation and set up in about an hour - I can't wait to get it into the air, but the weather needs to improve first . A very nicely constructed model and one which I am proud to own .

Jimi Wishbone | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 05, 2015

The boom is very fragile at the pod and wing connection, you can wrap the boom with tape around the wind mount area, between the mountings and just aft of the rear mounting, this helps stop the boom splitting, also you can tape the back of the pod to the boom with foam backed servo tape, just remove the pod securing screws, apply tape to the area of the pod that's closest to the boom, then when you screw the pod back on, make sure the tape sticks to the boom, this will give the boom a bigger connection point with the pod, decreasing the likelihood of stressing the boom on a bad landing and from launching.
Considering the weight, it flies pretty well, I also have the yellow none aileron version

Konrad | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2015

Sehr gut verarbeitetes Modell, soll mit 1S Lipo 600 mA mit Voltbooster betrieben werden wegen Gewicht, damit der Schwerpunlt passt.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 01, 2015

As as first DLG, I think this is a great model, it's true, the boom where it goes i nto the pod is a bit weak, but, it's more down to the fact the pod is only supported by three screw, which leaves a lot of leverage force bei g transferred during a heavy landing. So before you fly it for the first time, put a bit of servo tape between the pod and the boom under the wing area, it'll save you cracking the boom like i did!

A bit of carbon laminated over the crakwilll fix it, ready for the next flight.

hjoore | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 18, 2015

Great little DLG. Structurally strong and has a nice finish. I've bought spare servos Turnigy 1440, but the stock ones are even better. Right wing had a slight twist up toward the tip, but this was easily fixed with a hot iron. First flight was unstable with the CG at 80mm, but after adding 10gram of lead to the nose, with the CG at 70mm it now flies great! It's also very nice to have the flaperons. I've mixed elevator with flaperons and vice versa so it can fly efficiently at various airspeeds. Great product and definitely a lot of fun. Havent gotten more than 30 second flights in dead air, I can't wait to find some thermals. Would definitely recommend this DLG.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 30, 2015

I received my DLG in good condition wit tight covering. I used a Turnigy battery voltage booster and a 1s Turnigy battery. The servos and linkages were pre-installed so all I had to do was install the receiver and equipment listed above. It took longer to program my transmitter than assemble the plane! My first impressions were positive and the fist flights were predictable with only a little down trim needed. I LOVE THIS PLANE!!I set up the ailerons in three modes, launch 2mm up, even for flight, and 4mm down for landing. I'm still tweaking the settings but this is so simple and fun! This will not be my last DLG.

EvanF | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 07, 2015

I bought this glider as my first dlg, as I was interested in having flaperons rather than the rudder/ elevator control of the other version. I was happy to see that the glider arrived in good packaging with no damage. Although the kit's contents did not match the instructions exactly (the throwing peg has been changed), there was no confusion in the assembly process. I originally used a 2s 300 battery with a BEC and hobbyking's 3 channel receiver, but eventually switched to a 1s 500 to save weight and to make it easier to fit everything in the canopy. The plane feels like it is high quality, and is very light. I started with overhand launches and decided that I needed to reinforce the vertical stab because it is glued to the boom without removal of the covering film. With that securely attached, I tried discus launching and found that it was relatively easy. I get between 30 and 50 feet of height with a conservative throw. I found after some not-so-graceful crashes, however, that the boom tends to crack under the rear wing mount. the plane still flies fine with the cracks, but would probably have a short life span that way, I will be reinforcing that area, and everything else seems to be reasonably durable.
I am happy with the purchase, and although I would have liked to see a stronger boom/ wing mount solution, the glider is good enough quality at a good enough price to learn

SAP Hungary Kft | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 02, 2015

The overall quality of this product is quite good for that price.
The main weak point is that the fuselage rod is VERY weak at the front side. The wall thickness is paper thin so it can not withstand any impact.

So it is after all it is not suited for beginners...

  1. 1
  2. 2
顧客ファイル
Mini DLG Download [630]
HKMiniDlgPro.pdf Download [855]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

Related Tags