New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

HobbyKing™S550 Hexcopterコンボ(フレーム、ESCのとモーターズ)(ARF)

HobbyKing™S550 Hexcopterコンボ(フレーム、ESCのとモーターズ)(ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
426000016-0
WANT FREE SHIPPING? Click here to find out more!

HobbyKing S550 Hexcopterコンボはthier独自のマルチコプターを構築するが、独自のコンポーネントを選択するの頭痛なしですることを好む人のための優れた選択肢です。コンボの契約は、あなたのS550のための最高のパフォーマンスを提供します、完全に一致するコンポーネントが含まれています!

S550frameは、炭素繊維の着陸装置ときちんとして簡単に配線用プリント配電盤(PDB)に建てられたボーナスと優れた強力な軽量hexcopterフレームです。

六角設定の追加リフト容量は、このようなカメラシステムやその他の電子部品などのより大きなペイロードを運ぶため、このフレームに最適です。このため、優れたカメラリグまたは単に曲芸飛行のために非常に機敏かつ強力なマルチコプターフレームのためになります!

S550フレームのアームは、補強性および安定性を改善し、高速前進飛行を提供するために上向きに反っている炭素繊維です。 S550のアッパーデッキもPCとの接続を可能にするミニUSBソケットが含まれているため、ご希望のフライトコントローラを調整するためのフレームを分解する必要がないでしょう。

コンボパックは1×S550フレームアセンブリを含む、6倍速は30アンペアBLヘリESCの、6倍速EMAX MT2216-810KVブラシレスモータ、10×4.5 CW / CCWのプロペラセットは2-6s、このフレームの組み立てはのための事前スレッドの袖で超簡単ですすべてのフレームのボルトはそうないロックナットは必要ありません。

特徴:
•コンボセットは、S550フレーム、ESCの、ブラシレスモータを含み、
•すべてのフレームのボルト用の真鍮製のスリーブを事前スレッド
•PCとの接続と統合プリント配電盤
•炭素繊維が増加した強度と耐久性のために武器を強化
•組み立てが超簡単
•ただ、ご希望のフライトコントローラを追加

フレーム仕様:
フレーム直径:550ミリメートル
身長:288ミリメートル
重量:445グラム(フレームのみ)
モーターマウントボルト穴:16,19,25mm

パックには含まれています:
1×S550 Hexcopterフレーム
6×2-6s 30アンペアBLヘリESCの
6×EMAX MT2216-810KVブラシレスモータ
1×10x4.5 CW / CCWプロペラセット

必須:
1×HobbyKingマルチローターコントロールボード
1×2200〜4000mAh 3〜4秒LiPolyバッテリー
1×10x4.5 CW / CCWプロペラセット

  • 単位 426000016-0
  • Brand HobbyKing
  • 容量(mAh ) -
  • 重量 2020.0000
  • 長さ 400.00
  • Width 20.00
  • 高さ 190.00
  • HK S550 Hexacopter Combp\o
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very quick build and great quality! Fast flier with stock engine/esc, with my set up with dji nasa-m, flies 85-90km/h in atti mode! So upsvept arms are no bad idea!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very quick build and great quality! Fast flier with stock engine/esc, with my set up with dji nasa-m, flies 85-90km/h in atti mode! So upsvept arms are no bad idea!

nice combo comes with propellers but not the usb cables that the video says that comes with !!!! anyways the naza doesn't need the usb plug to be on the frame, its on the led already one thing that i noticed was the pids are not the same as the 450 its not as stable, it wobbles more and its not as simple to adjust the gains I've seen videos were people place the battery on top! maybe thatss it or the esc and motors are not as good does anyone has pids to share? i have the remote gain assign to my futaba but on my 450 it worked perfect with a simple knob increase or decrease

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice combo comes with propellers but not the usb cables that the video says that comes with !!!! anyways the naza doesn't need the usb plug to be on the frame, its on the led already one thing that i noticed was the pids are not the same as the 450 its not as stable, it wobbles more and its not as simple to adjust the gains I've seen videos were people place the battery on top! maybe thatss it or the esc and motors are not as good does anyone has pids to share? i have the remote gain assign to my futaba but on my 450 it worked perfect with a simple knob increase or decrease

Very good hexacopter. Very well made. Motors are great, ESC's are great. Qaulity is great. The upswept arms are better then the DJI arms. More stable and they are very stiff arms with carbon rod in them. VERY HAPPY WITH THIS!! I have a naza lite flashed with V2 firmware to go in. 5/5.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good hexacopter. Very well made. Motors are great, ESC's are great. Qaulity is great. The upswept arms are better then the DJI arms. More stable and they are very stiff arms with carbon rod in them. VERY HAPPY WITH THIS!! I have a naza lite flashed with V2 firmware to go in. 5/5.

This is a very nice take on the DJI flamewheel. However, the arms are reinforced with Carbon Tubes. The lower frame piece acts as power distribution with plenty of solder contacts for the motors and accessories. Plenty of fasteners are included and the instructions are decent enough for the mechanically inclined. There's just enough space between the frame pieces to mount a flight controller, video transmitter and data radio. The flybars are nice and give you flexibility in how you mount your battery, receiver and camera system. The frame has enough power to comfortably lift a lightweight gymbal like the Tarot and a gopro.

Be advised that the ESCs provided in this kit - EMAX BLHeli Optos, do NOT work with HKPilot32 flight controllers or other Pixhawk based controllers. I purchased one, ran through the setup in Mission Control and tested it. The flight controller signal is not compatible for some reason. This is apparently a known issue with emax ESCs. You can research it on DIY Drones. There is a work around but it involves desoldering resistors from the ESC PCB. If you don't feel comfortable doing that, order different ESCs if you plan to use Pixhawk (and you should). Otherwise, this is a nice, quality build frame.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very nice take on the DJI flamewheel. However, the arms are reinforced with Carbon Tubes. The lower frame piece acts as power distribution with plenty of solder contacts for the motors and accessories. Plenty of fasteners are included and the instructions are decent enough for the mechanically inclined. There's just enough space between the frame pieces to mount a flight controller, video transmitter and data radio. The flybars are nice and give you flexibility in how you mount your battery, receiver and camera system. The frame has enough power to comfortably lift a lightweight gymbal like the Tarot and a gopro.

Be advised that the ESCs provided in this kit - EMAX BLHeli Optos, do NOT work with HKPilot32 flight controllers or other Pixhawk based controllers. I purchased one, ran through the setup in Mission Control and tested it. The flight controller signal is not compatible for some reason. This is apparently a known issue with emax ESCs. You can research it on DIY Drones. There is a work around but it involves desoldering resistors from the ESC PCB. If you don't feel comfortable doing that, order different ESCs if you plan to use Pixhawk (and you should). Otherwise, this is a nice, quality build frame.

Customer files
s550 built... Download [175]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save