統合されたPCBとHobbyking™タイタス-600カーボンファイバートライヘリコプターフレーム

• Overall
• Quality
• Value

great

Jan 19, 2017

discussion part is not working???

• Overall
• Quality
• Value

great but i have no power to the motors from the underside plate???

Jan 19, 2017

I have got no power from the battery to the motors. Is the underside + not connected to the upperside + ?

• Overall
• Quality
• Value

Certified Buyer Rated

Aug 07, 2016

It seems nice and strong but don't use the provided servo if you want to have a good build.

• Overall
• Quality
• Value

Certified Buyer Rated

May 06, 2016

ottimo telaio! veramente professionale ben costruito in tutti i suoi aspetti molto leggero e trasportabile! consigliato apm2.6

• Overall
• Quality
• Value

Customer Rated

Apr 10, 2016

I decided to build my masterpiece using this frame. KK2 mini, Feiyutech Mini 2D gimbal with Turnigy HD 1080. Fat Shark FPV. Quanum 2217 800kv w/ 10x45 props and 4s battery. WOW! Best flier on my flight deck. Which includes 8 Tricopters and 3 quads.

• Overall
• Quality
• Value

Customer Rated

Feb 03, 2016

Overall pretty good, and definitely good value for money. Integrated power distribution in the the frame is nice and it all goes together well. Instructions are hopeless, but it's not rocket science!

The good:
* Integrated Power Distribution work really well and is very well thought out with regards to folding design
* Very stable flight
* Yaw mechanism works beautifully

The bad:
* Clamping system for landing gear (bottom end) is malformed and puts uneven pressure on the (thin) CF tube, cracking it both sides
* Included servo is VERY cheap and lasted literally two flights before stripping the plastic gears. Buy yourself a nice metal gear drop in replacement...
* Figure 8 mounting mechanism for the yaw doesn't look particularly robust. Time will tell...

• Overall
• Quality
• Value

Customer Rated

Nov 04, 2015

I just received this frame kit and have started building it.
It's very well made, all the parts fit nicely together, it is seriously strong and will be a very robust model. I have purchased a metal servo for the tail rotor just as a precaution. Great kit....good work Hobbyking.

• Overall
• Quality
• Value

Customer Rated

Oct 24, 2015

What to say...
Wow..thats the real all-in-one word:
1. all tubes 3k carbon with nice finish
2. PDB integrated on downplate up- and downsided ( !!! )
3. motor-mount-frames out of nearly nylon-t70 plastic, very good quality
4. tail-mount and bearing "heavy-duty-style"
5. included servo is a yoke, but included
6. battery-holder is a yoke, just a 30x50mm pad
7. "Anti-twist-Arms"...ump...sorry, but with only 1side of a tube center-adjusted...nope
8. the screws....yes, like always the screws: better take from aftermarket...

After all: nice frame for the money with a wide range of units and setups possible

CoG of Tri:
line up front motors,
from that middle line down to rear motor,
from that distance 33 pcnt from front should be a valid base-value

Greedz JP

• Overall
• Quality
• Value

Customer Rated

Oct 21, 2015

After some tuning, the following PI settings for the KK2.1.5 board work best for me.
Ail/Ele 45/100/12/20
Rud 40/20/20/10
SelfLevel 70/20

• Overall
• Quality
• Value

Customer Rated

Oct 17, 2015

I have replaced the standard feet with longer bamboo poles from the local garden centre, not much weight difference. I achieved a 19 minute hover time with a 5000MaH 4S Turnigy Hard Case battery. The tail movement is a little twitchy, I am trying to tune this out of the KK2.1 and have ordered a NAZE32 funfly board to see if it is better.