The H-King Jetstar EDF Jet takes you to the next level of performance. The 11-Blade 64mm EDF will give you the power to burn as well as that realistic jet sound. As it is only 940mm long it will be easy to transport to the nearest flying field.

Made of strong EPO foam and a quality build this jet will soar through the air. Build time is kept to a minimum as servos, motor, ESC and EDF are pre-installed. Its great looks and sleek lines are enhanced by the factory fitted decals. The large battery hatch will make installing the receiver (not supplied) and battery (not supplied) a breeze. It comes with a steerable nose wheel to provide better ground handling.

Once in the air, there is plenty of power with a 1:1.2 thrust rate provided by the 4S EDF system. This will make all aerobatics and fast low-level passes just so easy. It comes with a rudder so you should be able to try a few knife edges. This plane is built to fly.

Features:
• Made of strong EPO foam
• Plug-in wings with strong magnets for fast assembly and the ability to fly at high speed
• Motor, EDF, Servos, and ESC are factory pre-installed
• Large canopy for easy battery access and RC installation
• H-King 11-blade EDF produces a realistic “Whooshing” gas turbine jet sound
• Factory-applied decals

Specs:
Wingspan: 800mm (31.5”)
Length: 940mm
Flying weight: 900-1000g
Thrust rate: 1:1.2
Motor: D2839-3300kV
EDF: 64mm (11-blades)
ESC: 60A Brushless
Servo: 4 x 9g plastic gear, 1 x 9g metal gear on elevator
Flight time: 5 mins (approx)

Required:
1 x R/C Radio System (T/RX)
1 x 2200mAh 4S LiPo battery

Please note: A copy of the building instructions is under the "Files" tab.