New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

Kingduino宇野R3にてサポートされているマイクロコントローラ - アトメルATmega328

Kingduino宇野R3にてサポートされているマイクロコントローラ - アトメルATmega328

Shipped From:
  • Global
QTY:

Now save save AU$0.00 AU$0.00

AU$15.80
ステータス:
在庫あり
重量:
75 g
SKU:
381000030
WANT FREE SHIPPING? Click here to find out more!

Arduinoの宇野ATmega328に基づくマイクロコントローラボードです。これは、(6 PWM出力として使用することができるから)6アナログ入力、16 MHzの水晶発振器、USB接続、電源ジャック、ICSPヘッダ、リセットボタン14デジタル入力/出力ピンを有します。これは、マイクロコントローラをサポートするために必要なすべてのものが含まれています。単に始めるためのAC-DCアダプタまたはバッテリをUSBケーブルや電源、それを使ってコンピュータに接続します。

宇野は、FTDI USBシリアルドライバチップを使用していないという点で先行するすべてのボードとは異なります。代わりに、USB - シリアル変換器としてプログラムAtmega16U2(Atmega8U2バージョンまでのR2)が備わっています。

宇野ボードのリビジョン2は、それが簡単にDFUモードに入れて作り、地面に8U2 HWBラインを引っ張る抵抗があります。

ボードのリビジョン3は、次の新機能があります。
1.0ピン配置:シールドはボードから供給される電圧に適応することを可能にする追加SDAとAREFピンの近くにあるSCLピンとRESETピンの近くに配置された2つの他の新しいピン、IOREF。将来的には、シールドは(5V @動作)AVRを使用するボードとと@ 3.3Vを操作Arduinoのために両方の互換性があります。第1は、将来の目的のために予約されて接続されていないピン、です。


*注:
これは、異なるメーカーによって同じ構成要素と機能を用いて製造され、オリジナルのArduinoのブランドの製品ではありません。


仕様:
マイクロコントローラ:ATmega328
動作電圧:5V
入力電圧(推奨):7-12V
入力電圧(制限):6-20V
デジタルI / Oピン(PWM出力を提供する6の)14
アナログ入力端子:6
I / OピンあたりのDC電流:40ミリアンペア
3.3VピンのDC電流:50ミリアンペア
フラッシュメモリ: ブートローダで使用される32キロバイト(ATmega328)の0.5キロバイト
SRAM:2キロバイト(ATmega328)
EEPROM:1キロバイト(ATmega328)
クロック速度:16MHzの

含まれています:
1×Arduinoの宇野R3マイコンボード
1つのx USBケーブル

  • 単位 381000030
  • Brand -
  • 容量(mAh ) -
  • 重量(g ) 75.00
  • 長さ 150.00
  • Width 25.00
  • 高さ 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

Excelente calidad en la fabricacion lo recomiendo ampliamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente calidad en la fabricacion lo recomiendo ampliamente

not the orginal Arduino but bootloader is preinstalled and all works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not the orginal Arduino but bootloader is preinstalled and all works fine.

Arduino... novos desafios, vamos l!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arduino... novos desafios, vamos l!

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

Customer files
921137919X677897X37.jpg Download [16]
921137919X677897X43.png Download [2]
921137919X677897X59.png Download [11]
sensorshield Download [184]
arduandjoy Download [189]
sensorsheld Download [56]
sensorshieldpinouts Download [153]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save