KISS ESC 2-6S 32A (45A Limit) - 32bit Brushless Motor Controller

KISS ESC 2-6S 32A (45A Limit) - 32bit Brushless Motor Controller
The KISS 32A 2-6S ESC has been developed for power hungry motor/prop combinations and has an M4 32bit MCU for quick reactions.
This KISS ESC comes naked (no wires) to make it easier to fit exactly where you want on your multirotor frame. With the addition of a capacitor, it can work with 6S batteries (works on 3~5S without extra capacitor).
Get powering with this high-powered little ESC.
Features:
• 32-bit ARM Cortex M4 MCU @80Mhz
• Telemetry capability (voltage, current, temperature, rpm)
• Overcurrent protection (measures the current and reduces it to max 40A)
• Over-temperature protection (reduces the max power if hotter then 100°C)
• sinHybrid : Sinwave/BackEMF Hybrid Commutation for smoother running.
• Dshot 2400 (Full resolution of 2000 steps takes only 6.5µs)
• Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change.
• Expanded adaptive auto timing (3,25-30° advance on each commutation)
• For Race Multicopters (32A continuous also with weak cooling)
• High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor)
• Accurate RPM control (2000 steps using Dshot)
• No additional capacitor needed for 3-5S. Add a min. 220µF min. 50V Cap for 6S usage!
• Very fast throttle response
• Linear throttle response
• Active freewheeling (low diode losses)
• Regenerative braking
• Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 – 500Hz) PWM auto detected.
• Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE and Multiplex SRXL
as well as the Telemetrys, S-Port, Graupner HOTT, TBS CROSSFIRE and Sensorbus
Specs:
Size: 19x27mm
Operating voltage: 9 - 30V (3-6s)
Maximum continuous current: 32A
Instantaneous maximum current: 40A, actively limited
Maximum rotation field speed: 600000 ERPM (usage up to 500000 recommended)
KISS ESC 2-6S 32A Manual v1 | Download [0] |