ミディアムロックオンナイロンコントロールホーン10個入り
ミディアムロックオンナイロンコントロールホーン10個入り
Copy and Share the Below URL
エルロン、エレベーター、ラダーと似たアプリケーションのためのナイロンコントロールホーンをロックオン。バックプレートは、ホーン上のセレーションの上にプッシュし、場所、接着剤が不要にそれをロックします。
仕様：
基地からホーンの長さ：18ミリメートル
コントロール・サーフェスの最大厚さ：6ミリメートル
ベースの長さ：12ミリメートル
ベースの幅：8ミリメートル
素材： ナイロン
固定： ロックオン
-
単位 017000307-0
-
Brand -
-
容量（mAh ） -
-
重量 17.0000
-
長さ 50.00
-
Width 15.00
-
高さ 30.00
Great horns for the price plus they are the same size for your AXN but stronger !!!! Get them !!!
Great horns for the price plus they are the same size for your AXN but stronger !!!! Get them !!!
These horns are perfect for medium-sized (1m - 1.5m span) Flite Test scratch-built planes like the FT-Spitfire, FT-Mustang, FT-Sea Duck, FT-Viggen, etc... The square plate works like a zip-tie to lock the horn in place. Inexpensive, reliable, convenient. But for smaller planes with a span under 800mm (Like FT-Minis) I use smaller, lighter horns.
These horns are perfect for medium-sized (1m - 1.5m span) Flite Test scratch-built planes like the FT-Spitfire, FT-Mustang, FT-Sea Duck, FT-Viggen, etc... The square plate works like a zip-tie to lock the horn in place. Inexpensive, reliable, convenient. But for smaller planes with a span under 800mm (Like FT-Minis) I use smaller, lighter horns.
great horn with locking feature ,but sill needs a little glue
great horn with locking feature ,but sill needs a little glue
this is a good idea to put horn on wing. I always hated the glued one as there is always a chance they're come off. this is much better
this is a good idea to put horn on wing. I always hated the glued one as there is always a chance they're come off. this is much better
work well for my diy planes and it very cheap compare to market
work well for my diy planes and it very cheap compare to market
very good horn and sometimes can use without glue
very good horn and sometimes can use without glue
squadrette utili per aereo elettrico
squadrette utili per aereo elettrico
I'm going to use this on my bixler 2 to replace the stock ones, which are not glued properly
I'm going to use this on my bixler 2 to replace the stock ones, which are not glued properly
esses horns a melhor opo para aermodelo de deprom, de facil fixao
esses horns a melhor opo para aermodelo de deprom, de facil fixao
standard horns made out of plastic and they are strong. just cause they are cheap dose not mean they suck.
standard horns made out of plastic and they are strong. just cause they are cheap dose not mean they suck.
Others Also Bought
-
ナイロン＆釘付けヒンジ16x28.5（10個入り）SKU: 008-00201x10
AU$2.12 -
ナイロンクレビス2x29mm（10個入り）SKU: 12-00503x10
AU$1.23 -
HXT900マイクロサーボ1.6キロ/ 0.12sec / 9グラムSKU: HXT900
AU$4.15 -
リンケージストッパーD2.1mm（10sets）SKU: 016-00503x10
AU$1.98 -
コントロールホーンの16x20mm（10個入り）SKU: 07-00502x10
AU$1.80
お奨め商品
-
ナイロンクレビス21ミリメートル（オリジナルカラー）（10個入り）SKU: 017000342-0
AU$1.57 -
ナイロンコントロールホーン10個入りで大グルーSKU: 017000304-0
AU$1.58