New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

ESCのクワッドローターフレーム235ミリメートル(KIT)/ワットマイクロ統合PCB

ESCのクワッドローターフレーム235ミリメートル(KIT)/ワットマイクロ統合PCB

Discontinued Product

Please continue searching for a similar product.
SKU:
366000002
WANT FREE SHIPPING? Click here to find out more!

この小さなはまだ見事ミニクワッドは4×8(a)のESCのプリインストールと統合されたPCBのフレームを備えています設計されています。単にあなたの好みのモーター上のボルトは、その後、ワイヤーはんだフレームに直接つながります。

ESCを持つ統合された配電システムは、電子機器が周囲にインストールneatestの1になります。このかわいいクワッドはあっても、モータマウントの上部と下部の両方に統合されたLEDを備えています。 LEDは、ボードスライドスイッチ上を経由して "X"と "+"設定の両方の間で切り替えています。

すべての取り付け金具とフレームの構成要素は、キットに含まれています。あなたは空気中のこのクワッドローターを持っている必要がありますすべては、4×ブラシレスモーター、プロペラのセット(2賢明クロックと2反時計回り)500〜1000mAhの2〜3秒のリチウムポリマー電池、HobbyKingマルチローターコントロールボードとあなたのです自身の送信機&受信機(送信/受信)。

特徴:
コンパクト、軽量設計
整頓コンポーネントのインストールのための統合されたPCB
統合8A ESC×4
フレームと取り付け金具のフルセットが含まれています

仕様:
:235ミリメートル
身長:35ミリメートル
重量:82グラム(ワット/アウトエレクトロニクス)
モーター取り付け穴:13ミリメートル
統合されたESC:4×8(a)

必須:
4×ブラシレスアウトランナーモーター
4×5〜6インチのプロペラ(2CW&2CCW回転)
1×HobbyKingマルチローターコントロールボード
1×500〜1000mAhの2〜3秒のリチウムポリマー電池
独自の4CHの送信機と受信機

  • 単位 366000002
  • Brand -
  • 容量(mAh ) -
  • 重量 125.0000
  • 長さ 250.00
  • Width 35.00
  • 高さ 250.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Hobby kings preferred method of customer service is to cut you off. There are no recomended motors for this frame because, the don't sell any!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hobby kings preferred method of customer service is to cut you off. There are no recomended motors for this frame because, the don't sell any!

Newbie bought this frame to save the guessing work but i was wrong! Managed to go around solving which goes where after much effort & learning to hover now. Besides a problem with the #4 esc this board is super tough! Crashed many times & it's still flying! Newbies can try first hand on what quad is all about with this frame, provided someone help you assemble it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Newbie bought this frame to save the guessing work but i was wrong! Managed to go around solving which goes where after much effort & learning to hover now. Besides a problem with the #4 esc this board is super tough! Crashed many times & it's still flying! Newbies can try first hand on what quad is all about with this frame, provided someone help you assemble it!

Very good micro frame. The Escs are smooth and the LEDs are cool !
I have mine set up with 1510 2200 kv outrunner and an Acro N a z e 32 FC ... = very crisp response. Good value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good micro frame. The Escs are smooth and the LEDs are cool !
I have mine set up with 1510 2200 kv outrunner and an Acro N a z e 32 FC ... = very crisp response. Good value.

not a good frame, holes don't allow mounting for turnigy motor recommended for this frame, the esc's timing is also wrong, even with simon k TYG6A flashed to all esc's still no good, the frame is currently in folded bits in the bin

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not a good frame, holes don't allow mounting for turnigy motor recommended for this frame, the esc's timing is also wrong, even with simon k TYG6A flashed to all esc's still no good, the frame is currently in folded bits in the bin

is a fragil quad!!!!!!!!!!!!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

is a fragil quad!!!!!!!!!!!!!!

This PCB frame is way better than this white pcb microquad crap.
So far I've only changed some of the screws for a metal ones.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This PCB frame is way better than this white pcb microquad crap.
So far I've only changed some of the screws for a metal ones.

Nice and stable frame. Cool LEDs. The ESCs are not build to last long. I have it running with Turnigy 2211 2300kv motors, 5030 HK Propellers and HobbyKing 6A ESCs (SimonK). The motors can be mounted using a 10mm drill and some glue. The total current on 3s 35c 850mAh is 20A. This setup still kills the original ESCs after maybe 20-30 flights.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and stable frame. Cool LEDs. The ESCs are not build to last long. I have it running with Turnigy 2211 2300kv motors, 5030 HK Propellers and HobbyKing 6A ESCs (SimonK). The motors can be mounted using a 10mm drill and some glue. The total current on 3s 35c 850mAh is 20A. This setup still kills the original ESCs after maybe 20-30 flights.

The Frame on this littlw quad is just OK. The motor mounting holes are odd and most motors require ziptie/glue mounting. Multistar 1704-1900 kv motors fit perfectly and fly this quad with authority with 5x4.5x3 propellers.



The integrated ESC's are a joke. I had nothing but trouble with a lazy ESC on one arm that absolutely wouldn't calibrate to the same throttle range a sthe other ESC's. I flashed SimonK firmware to the quad in an effort to fix the issue. The quad flew for all of 10 seconds before the same lazy ESC blew up.



I ended up going to 12A HK Blue Series ESC's flashed with SimonK and just use this integrated quad as a frame and it's become my go-to quad. So much so that I haven't wanted to fly my 330 quad or my much better equiped 500mm.



Overall, the frame is pretty durable. I have dumped this several times, once yesterday from about 50 feet up directly inverted and it's more-or-less survived intact. The nylon screws serve as engineered break points to prevent the arms from breaking.



If you buy one ,get two. buy EXTRA 3mm screws and extra 30mm spacers because the legs will break a lot. I now just removed the legs and used screws and hand-launch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Frame on this littlw quad is just OK. The motor mounting holes are odd and most motors require ziptie/glue mounting. Multistar 1704-1900 kv motors fit perfectly and fly this quad with authority with 5x4.5x3 propellers.



The integrated ESC's are a joke. I had nothing but trouble with a lazy ESC on one arm that absolutely wouldn't calibrate to the same throttle range a sthe other ESC's. I flashed SimonK firmware to the quad in an effort to fix the issue. The quad flew for all of 10 seconds before the same lazy ESC blew up.



I ended up going to 12A HK Blue Series ESC's flashed with SimonK and just use this integrated quad as a frame and it's become my go-to quad. So much so that I haven't wanted to fly my 330 quad or my much better equiped 500mm.



Overall, the frame is pretty durable. I have dumped this several times, once yesterday from about 50 feet up directly inverted and it's more-or-less survived intact. The nylon screws serve as engineered break points to prevent the arms from breaking.



If you buy one ,get two. buy EXTRA 3mm screws and extra 30mm spacers because the legs will break a lot. I now just removed the legs and used screws and hand-launch.

Was missing bag of 24 screws. Could not finish it without them. Tested the escs. Burnt 1 esc out on 3s. 2s was good, but too late now. Guys, don't push the escs over 5 amps to be safe. Max 20 amps in total. Happened to me. I would rate 5 for quality, but after 3s test, it's not your safe bet. Still very disappointed quality of inventory check before they sent it. Now I have to buy my own nylon screws and separate escs. Buyer's be aware and beware.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Was missing bag of 24 screws. Could not finish it without them. Tested the escs. Burnt 1 esc out on 3s. 2s was good, but too late now. Guys, don't push the escs over 5 amps to be safe. Max 20 amps in total. Happened to me. I would rate 5 for quality, but after 3s test, it's not your safe bet. Still very disappointed quality of inventory check before they sent it. Now I have to buy my own nylon screws and separate escs. Buyer's be aware and beware.

Not the best but it's ok! I can't assembly the turnigy 1811 direct on the frame, but, i have same ideas to do it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not the best but it's ok! I can't assembly the turnigy 1811 direct on the frame, but, i have same ideas to do it!

  1. 1
  2. 2
  3. 3
Customer files
tngy 2211-2300 Download [182]
motor mount dimensions Download [220]
Motors Download [1962]
Motor Download [1862]
Mini Quad Download [2280]
Manual German Download [776]
pictures Download [2822]
Manual English Download [149]
Frame with 1811 mounted Download [57]
Quelques explications ... sur le montage Download [415]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save