サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

$0.00

ショッピングカート 0 ショッピングカート 0 Loading...

ミグ-3ソビエトファイターバルサGP / EPの1570ミリメートル(ARF)

Generating Links

ミグ-3ソビエトファイターバルサGP / EPの1570ミリメートル(ARF)

価格:

Now save 節約 $0.00 $0.00

$139.82
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
341000005-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

ミコヤン - GurevichのMiG-3は、第二次世界大戦中に使用されるソビエト戦闘機でした。ミグ-3は、低性能ポリカールポフI-152の複葉機とポリカールポフI-16単葉機に慣れたパイロットのための一握りであることが証明1941年の春にサービスに入りました。

7200メートルで毎時398マイルのミグ3のトップスピードが速いドイツのメッサーシュミットBfは109F-2よりもサービスにおける1941年の初めにミグの速度の利点は、海面では最大速度として姿を消した低高度でのみ毎時314マイルの一方でしたBfは109F-2はわずかに速かったです。残念ながら、ミグ3とそのパイロットのため、東部戦線の上に空中戦では、一般的にそれは速度の利点を有していなかった低・中高度で行われました。

当社のミグ3モデルが必要なだけで、最終的な組み立てや機器のインストールを飛ぶことはほとんど準備ができています。すべてのバルサ機体はニトロエンジンを取るのに十分な強さ、まだ電気変換のための十分な光です。前部胴体はちょうどあなたの電池や燃料タンクのようなものをアクセスするために、その中に磁気的に確保ハッチを持っています。頑丈な固定テールドラッガランディングギアは、しかし後退のセットは右でドロップされます。このモデルではあってもプッシュロッド、コントロールホーン、燃料タンク、エンジンマウントなど、非常に完全なハードウェアパックが付属していますように設計されて粗い草のフィールドに最適ですプラスチックスピナー。

スケールのリアリズムに追加するには、カバーはマルチカラープラスチックフィルム、印刷されたパネルラインやリベットの詳細とセミマット仕上げです。モデルの締めくくりは、素敵な塗装済みグラスファイバーカウルです。

ミグフライング光翼面荷重のおかげ御馳走です。このスポーツのスケールモデルは、過去数年の重い鉄のではありません。スケール翼よりも厚いミグは、より多くのスポーツモデルのように飛ぶ意味、ストールをtames。ロールスロイスはちょうどオフアキシャルあなたはウォーバードから期待通りです。フィールドの最後に勝利のロールに引き上げ、低および高速機銃掃射の実行をポンピングいくつかのアドレナリンのためにそれをクリーンアップする後退のセットにドロップします。印刷されたグラフィックスは、空気中や地面にモデルのポップを作ります。ムスタングとスピットファイアから素敵な変化は、このミグ3は、医師が注文したものだけであるべきです。

特徴:
•フライとほぼ準備ができて - 完全な最終組立を、あなたの電子機器の選択と電源システムをインストールします
•軽量バルサと合板建設
•固定ギア、準備撤回含まれています
•非常に詳細な印刷されたマルチカラーカバー
•燃料タンクやバッテリーへのアクセス用磁気胴体上部のハッチ
•塗装済みグラスファイバーカウル
•完全なハードウェアパックはスピナーを含み

仕様:
翼幅:1570ミリメートル
長さ:1140ミリメートル
フライング重量:2700グラム

必要なもの:
4+チャンネルトランスミッタおよびレシーバ
0.46 2ストローク/ 0.70 4ストロークエンジン
5×標準サーボ
レシーバーバッテリー(グロー)
800Wモーター/ ESC /バッテリー(電気)

  • MiG 3 Balsa Kit
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

johaider | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2016

This plane Apesta... At maiden flight, the elevator broke and the plane fell to the ground.
Model quality is quite poor and now I have an engine and several servos not work due to the poor quality of the product.
The wood is of poor quality, it was necessary to strengthen the site to place the servos.
The elevator is made of balsa wood without any reinforcement.
I followed step by step instructions in the manual, but it is not possible to predict the elevator broke in mid air.

celke | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2015

Vliegtuig ziet er goed uit, mooi vliegbeeld.
Prijs/Kwaliteit verhouding, tja, daar wordt je alleen maar vrolijk van.
En het toestel vliegt super makkelijk !

THEKVKID | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 26, 2015

Well designed even if not very scale. Nice smooth, easy, flier. Flown on 5020-640 motor with 14 X 7 on 4S 3800 pack. Esc switch mode 50 amp. Most flight uses little more than 25 amps during scale like flight. The model does not lose speed that much through the landing so set up your approach fairly low with just a touch of power. As a sport scale that looks a little different this is good value. I fitted HK retracts and they only required a little filing and grinding to fit well.

mike | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2015

This plane goes together very easy and flies well, no bad habits it's easy to fly, check that the push rods come out at the correct opening, mine did not and had to change 2 over, no big deal, mine is electric, make sure to put in down thrust when installing the motor, run's on a 4.500 4s for 6 minutes of spirited flying with 20-25pcnt left in the battery, you can paint on the covering with no prep, spray can paint sticks well, pic uploaded

bushy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 08, 2014

Ive just taken delivery of this fantastic model ,well built, the folie is nicely printed, no extra ironing needed, the wings have to be stuck together so youll need a a wing sack 1500mm to transport, its just another well built, well priced, good quality product from HK.
If you like warbirds and are fed up with styropur /EPO this is the one for you I highly recommend this product and for 94,00 you cant go wrong.
PB

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 04, 2014

de bonne qualit on verra en vol

Dumpsei | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 23, 2014

Leider hat die MIG nur 1500mm Spannweite (Wingspan) und nicht wie angegeben 1570mm!
Bin jetzt enttuscht!

Dumpsei | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 20, 2014

Schaut gut aus, einzig die Folie mu an gewissen Stellen nachgespannt werden, steht aber sogar in der Anleitung......

Sehr gut fr diesen Preis

Seong Jo | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 06, 2014

Good Plane!!!
I applied ASP91 4C and 13x8 prop.
well maid and good flight line.
I suggest to you by first engine warbird.

顧客ファイル
MJB_MIG3 Download [2294]
262608269X484956X30.pdf Download [1303]
No File Name Download [360]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!