サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

Multistarエリート2204-2300KVマルチローターモーター2-4S(CWプロップアダプター)

Generating Links

Multistarエリート2204-2300KVマルチローターモーター2-4S(CWプロップアダプター)

価格:

Now save 節約 ¥1,460.74 ¥1,460.74

Special Price ¥782.10 ¥782.10

You save 節約 ¥1,460.74 ¥1,460.74

Was  ¥2,242.84

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
9536000001-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

マルチローターの性能を最大化 - Turnigy Multistarエリートアウトランナーズを念頭に置いて一つのことで設計されています!新しいMultistarエリートモーターはマルチコプター性能の新しい標準です。各エリートモーターを最適化することをさらに洗練および効率/電力を可能にする特定のタイプ/アプリケーション用に構築されています。

Multistarエリートモーターは、日本ベアリング、N45SH磁石、0.2ミリメートルラミネーション、原稿180°無酸素銅線、0.005グラムバランシング、敷設完璧な風と100%から最高品質のコンポーネントを使用して建てられた..空想の名前と新しい暗緑色以上のものQC、及び各モータの設計は、それらの取付けから、プロペラ型アダプタへのタイプのアプリケーションおよびすべてのために評価されるが考慮されます。エリートモーターは芸術の真の作品です

エリート2204〜2300kvは5インチ小道具が最大であるそれらのタイトフレームに最適なマルチローターのミニ範囲のために設計され、5インチ小道具のために最適化されたモータの精密少し逸品です。 2204は..笑、その時々クラッシュのための取り外し可能/交換可能なローレットプロペラシャフトを有しており、弾丸のハードウェアに一致すると、CW / CCWのフレーバーで利用可能です。下部モータフレームは、タイトフレームに簡単に装備するために面取りし、クリアランスを巻きにハードウェアを取り付けるための高さをたくさん持っています。

Multistarエリートは、品質と価値の比類のない、パフォーマンスが自己のために語っています。

特徴:
•日本ベアリング
•N45SHマグネット
•0.2ミリメートルのラミネーション
•原稿180°の無酸素銅線
•0.005グラムまたはより良いバランス
•パーフェクトレイダウン巻線
•100%QC
•交換可能なCW / CCWの小道具アダプタ

仕様:
KV(RPM / V):2300KV
リポ細胞:2〜4秒
最大電流:126.5ワット
最大アンペア:11.5A
無負荷電流はありません:   0.6A / 10V
内部抵抗:0.125オーム
極数:12月14日
外形寸法(Dia.xL):22×4ミリメートル
モーターシャフト:3ミリメートル
プロペラシャフト:5ミリメートルCW小道具アダプタ
重量:24グラム
ボルト穴の間隔:16 * 19 M3
積層厚さ:0.2ミリメートル
マグネット:N45SH
バランス仕様:0.005グラム
ワイヤー: 原稿180°無酸素
コネクタ:2ミリメートルの弾丸

プロップデータ:

バッテリープロップスロットルスラストアンペア
11.1Vのは5x3 50%の224グラムの3.7A、
11.1Vのは5x3 100%の371グラムの7.5A
7.4Vの5X2 50%の120グラムの2.2A
7.4Vの5X2 100%の200グラムの4.3A

バッテリープロップスロットルスラストアンペア
11.1 5x3x3 50%の232グラムの4.7A
11.1 5x3x3 100%の392グラムの9.9A
7.4 5x3x3 50%の134グラムの2.7A
7.4 5x3x3 100%の211グラムの6.7A

バッテリープロップスロットルスラストアンペア
11.1 6X4 50%の385グラムの7.5A
11.1 6×4 100%の591グラムの9.9A
7.4 6X4 50%の134グラムの4.8A
7.4 6×4 100%の211グラムの9.7A

*注:一部 ESCは、最新のソフトウェア(SimonKまたはBLheli)を実行していない場合は同期の問題がある可能性があり、更新とモータのこのタイプのあなたのEscキーを設定していることを確認してください。

  • KV ( RPM / V ) 2300.00
  • 最大電流( A ) 25.00
  • 抵抗( MH ) 0.13
  • 最大電圧( V ) 15.00
  • 電力( W ) 350.00
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 17.00
  • 直径C (ミリメートル) 27.00
  • ことができます長さD (ミリメートル) 6.00
  • 総丈E (ミリメートル) 21.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • MultiStar Elite 2204 Motors
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Horváth | 確認済みの購入者

  • Overall
  • Quality
  • Value

Working good

Feb 26, 2018

Working good, Value for money is very good

ad_wing | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 04, 2016

Motores excepcionais para mini-quad. Acompanhados com o ESC Afro 12A v3 rocam nas horas, e não aquecem muito.

É pena que a indicação CCW e CW digam respeito ao spinner e não à rotação do motor. Para ultrapassar este problema troquei os spinners nos motores e agora está correcto.

Yannick | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jul 18, 2016

The Motors are well built, if you have luck.
I purchased 4 and two had a darker color and had quite strong vibrations. The other two were perfectly smooth and run very cool.
The Windings are very good, but the bearing seem to fail after a pretty short time.
After around 30 Flights they are already making typical noises of bearing failure and i am sure the won't last long.

Zal | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 25, 2016

Very good powerful motors. You can buy 4 of these then replace the prop adaptors but the CCW prop adaptors don't fit top ell on the motor but the FPV quad still is flying perfectly with no problems. I used 12 12amp ESC's and a 3s 2200mah zippy battery. My flight time is a good 6 minutes in which I was using all the functions on my RC transmitter. The speed of these motors are very fast and even on a self-level mode you still go very far.

Martin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 03, 2016

Been using these for about 6 months, they handle 5045 triblades bullnose on 4S like a charm. I feel like the bearings had wear a little, but I think is normal after so many dozens of packs flown.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 02, 2016

Not a bad motor for this price, seems to get hot fairly easily.

Frank | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 25, 2016

1 out of 4 already dead (burned) after 15 hours flight time. Used on a 3s setup with 5030 propellers. When they run they are really good and very efficient but unfortunately they don't last very long. So my advice: Don't buy them.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2016

I ran my quadcopter straight into the street at about a 45 degree angle and the motor still works! It must have been going around 70mph on impact.

Christian | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 20, 2016

These Multistar Elite 2204 motors are quite good. Ive had them for over a year now, and am very pleased. Right out of the package the motor bell was well balanced, and no addition of tape would reduce the already minimal vibrations the motors had. They have experienced a little wetness and a lot of hard crashes, theyve outlived 2 frames and are on their third, albeit not CF frames, and are still running well. The bearings are not showing signs of rust yet, and have only now begun to sound like they may have dirt in them or be failing, but the bell is not loose. I would estimate they have over 20 hours of actual run time on them.
I fly a 250 size quad on 3s For the first few months it was 5030 and 5040 gemfan props, then I moved to 6030 gemfan props(larger frame). Both run well with a 12A ESC, and nothing would get too hot after hard flights, just some warmth in the ESCs. The prop/power data displayed on the HK website seems pretty accurate from my experiments. I recommend these motors, however you should buy the ones with the different CW & CCW prop adapters if you prefer using the prop spinners. I used M5 lock nuts for holding the props on after crashing twice from self-loosening nuts on the CW motors.

Adam | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2016

These are great motors but I do not recommend their spinners. They fall off really easily. I bought nylon nuts (locking nuts) to use instead. The motors are outstanding though.

  1. 1
  2. 2
  3. 3
  4. 4
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

Related Tags

アクセサリー