新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

Multiwii MWC FC Bluetoothモジュールプログラマー(アンドロイド対応)

Multiwii MWC FC Bluetoothモジュールプログラマー(アンドロイド対応)

QTY:

Now save save AU$0.00 AU$0.00

AU$10.18
Stock:
重量:
19 g
SKU:
9387000028-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

この便利なBluetoothモジュールは、あなたのAndroidデバイスからワイヤレスでMultiwiiフライトコントローラを構成するために使用されます。あなたは、このモジュールを使用するようにモバイルデバイスにMultiwii構成のAndroidアプリをダウンロードする必要があります。

MultiWii設定アプリの機能:
•PIDを読み取りおよび書き込み
•AUX1とAUX2のための設定スイッチの調整
•モニターの受信信号とFC出力信号
•すべてのセンサーとGPS信号を監視
•磁力計および加速度計の校正
•保存したプロファイルを読み込みます
•アップグレードよりモレックス1.25ミリメートルプラグを説得するために

仕様:
接続: ブルートゥース/ UART TTLソケット
外形寸法:37.5x15x5mm
重量:4グラム/ 7グラム(ワット/ケーブル)

デフォルトパラメータ:
ボーレート:115200
モジュール名:HB02
ペアコード:1234

含まれるもの:
Bluetoothモジュール×1
UART 4​​ピンケーブル×1 200ミリメートル

Product
Specifications

追加情報

  • 単位:
    9387000028-0
  • Brand:
    いいえ
  • 重量(g )
    19.00
  • 長さ
    60.00
  • Width:
    15.00
  • 高さ:
    55.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I was adjusting PIDs from my phone in no time. Great product and a must if you need to make changes to your flight controller in the field.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this with a homemade MultiWii controller, works fine out of the box. I see others say they've used with with 5v, but not for me. I'm running it through an adafruit level converter, just needed to add a 3.3v circuit to my controller. Recommended and would buy again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Absolute must have for naze32
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Decent Bluetooth chip. Was easy to install on Naze32 running cleanflight 1.9.0 plug and play. I use it with EZ-GUI on my Note4. Ive mounted it on the underside of a 180mm quad with Velcro, and get ~10m range LOS in parks. Good for monitoring vBat (I have no radio telemetry), and tuning PIDs during a session. Ive also used it to configure Cleanflight on my laptop connected via Bluetooth. The heatshrink is decently thick and provides good protection. The included leads are colour coded, and the PCB includes an ordered label. With total weight is approximately 4.5 with the leads, which can be re-crimped. They are the typical 2.54mm with single-position housings (I swapped to 2x 2-position).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
j'utilise sur les cartes basecam 32bits et ca marche impeccable.plus de port usb qui gene pendant les auto pid sur les nacelles 3 axes...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I give it 4 stars because the lack of documentation, which can be found by a small amount of google magic. Other than that it works prfectly. Default settings it comes with are: Name HB-02, Password 1234 and 115200 baud.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This product is create because you can use it to create a Bluetooth bridge from your say, tablet to the 900mhz telemetry transmitter. This is great because you get a clean set up, and not all tablets support USB host mode for the transmitter! Remember, to swap your Tx and Rx round when you connect to your telemetry radio!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
works as advertised with android devices. Board is set to the correct baud rate so no mods are required using an FTDI board. Trying to see what I need to do to get it to work with IOS devices so more to come ...maybe.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fonctionne bien avec la Naze 32. Bonne qualit de realisation. Bon produit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ormai le allmie control board non faccio mai mancare uno di questi
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
No File Name download now [114kb]

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。