New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

NGH GF38 38ccガス4ストロークエンジン

NGH GF38 38ccガス4ストロークエンジン

Shipped From:
  • USA
  • Global
QTY:

Now save save AU$0.00 AU$0.00

AU$408.44
ステータス:
Backorder
重量:
2113 g
SKU:
406000024-0
WANT FREE SHIPPING? Click here to find out more!

NGHエンジンは性能と価値のためによく評判を集めている、彼らは目的製モデルエアロエンジンではなく、変換されたチェーンソータイプです。 NGHからの継続的な開発は、今日の市場で最高のこれらのいくつかを利用できるようになります。

NGHは、あなたがすべての利点を取得し、4ストロークの音が、ガスの経済となります、この最初の生産ガス4ストロークエンジンを革新し続けています。このエンジンは、ゼロから設計され、優れた圧縮のためのWALBRO炭水化物、RcXEL点火、ツインローラーCNCのコンロッド、ツイン環状ピストンを備えており、付属のスタンドオフが搭載されたビームまたは放射状であるされています。その印象的で、どの飛んでフィールド上に頭を回すために保証されて見えます。

特徴:
•コンパクトで軽量
•4ストローク技術
•ビームまたは伝統的なラジアルマウント
•優れた品質と性能

仕様:
タイプ: ガス4ストローク空冷エンジン
シリンダー: シングル
変位:37.97cc
ボアXストローク:39のx 31.8ミリメートル
圧縮比:1:9
電源:3.84hp
クランクタイプ: デュアルベアリングサポートと鍛造
クランクシャフトのスレッド:3/8 "×24TPI
キャブレター:WALBROカスタムWT1022
RPMの範囲:1800 - 8000rpm
イグニッション: 自動RcEXL DC-CDIを進めました
スパークプラグ:CM6 RcEXL
イグニッション電源:4.8〜6V DC(4〜5セルNiMHバッテリ)
燃料: 無鉛ガソリン/オイルミックス35:1
推奨するプロペラ:18x8 / 18x10 / 20X8 2ブレード
重量: 点火システムと1580グラム

  • 単位 406000024-0
  • Brand NGH
  • 容量(mAh ) -
  • 重量(g ) 2113.00
  • 長さ 170.00
  • Width 110.00
  • 高さ 170.00
  • NGH Gas Engine
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Surprising value and performance for the $. Pulls a 1/4 scale Tigermoth with authority and nice four stroke sound through the straight pipe, no muffler needed. Arrived tuned and ready to run. Needed 1/8 leaner turn on the low end jet. Idles smoothly at low RPM. Transitions to full throttle instantly. I also run an OS FG40 four stroke gasser. The OS has more power, but for $450 less, I'm planning to order another NGH soon. Measure your cowl length though. With rear carb and a long crankcase this engine is longer than some others. I took 1 3/4" off of the engine box for the Tigermoth and reinforced the new firewall well with gussets and fiberglass.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Surprising value and performance for the $. Pulls a 1/4 scale Tigermoth with authority and nice four stroke sound through the straight pipe, no muffler needed. Arrived tuned and ready to run. Needed 1/8 leaner turn on the low end jet. Idles smoothly at low RPM. Transitions to full throttle instantly. I also run an OS FG40 four stroke gasser. The OS has more power, but for $450 less, I'm planning to order another NGH soon. Measure your cowl length though. With rear carb and a long crankcase this engine is longer than some others. I took 1 3/4" off of the engine box for the Tigermoth and reinforced the new firewall well with gussets and fiberglass.

I bought this motor for a Piper Pa - 25 with 2580mm span . the motor runs very well and quiet.

The Price and the Quality of the Engine is also very good

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this motor for a Piper Pa - 25 with 2580mm span . the motor runs very well and quiet.

The Price and the Quality of the Engine is also very good

Bought a new one of these last summer. Had to go to Aus tars for a beam mount and Big Pla nes for a muffler. Apart from that, the thermal spacer (white washer was not flat and was causing an air leak in the inlet. After fixing that, it ran great. Is being fitted in a 1/3 scale SpaceWalker. A friend then sold me a slightly used one for 60 (Thats what I said) and also had the same problem. Quickly sorted, it flew last sunday in a Cap 232 72" span and was a great performer. Very clean, sounds right, and lasts 15min on a 16oz tank. Using a 20 x 8 prop at 6000rpm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought a new one of these last summer. Had to go to Aus tars for a beam mount and Big Pla nes for a muffler. Apart from that, the thermal spacer (white washer was not flat and was causing an air leak in the inlet. After fixing that, it ran great. Is being fitted in a 1/3 scale SpaceWalker. A friend then sold me a slightly used one for 60 (Thats what I said) and also had the same problem. Quickly sorted, it flew last sunday in a Cap 232 72" span and was a great performer. Very clean, sounds right, and lasts 15min on a 16oz tank. Using a 20 x 8 prop at 6000rpm

So far so good. Only ran half a tank through it so far with 30:1 oil mix. 18x8 wooden prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far so good. Only ran half a tank through it so far with 30:1 oil mix. 18x8 wooden prop.

I have received this engine from hobbyking recently. It was in a perfect condition when it arrived. All additional components neatly packed in separate bags. I have read on some fora that people received their engines with damaged cooling fins, but not this one. Must point out that these engines where not supplied by HK.

Assembled everything and can't wait to start her up tomorrow. As soon as I have tested it I will post video's

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have received this engine from hobbyking recently. It was in a perfect condition when it arrived. All additional components neatly packed in separate bags. I have read on some fora that people received their engines with damaged cooling fins, but not this one. Must point out that these engines where not supplied by HK.

Assembled everything and can't wait to start her up tomorrow. As soon as I have tested it I will post video's

I have the engine and it runs great. Hard to start the 1st day, but after it runs, I can re start it by hand. has anyone tried running the engine with higher Octane? I'm running regular pump gas 87 and I need to run higher for my other gas engines at the field. will 100 Octane hurt this motor at 25:1 full synthetic Oil?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have the engine and it runs great. Hard to start the 1st day, but after it runs, I can re start it by hand. has anyone tried running the engine with higher Octane? I'm running regular pump gas 87 and I need to run higher for my other gas engines at the field. will 100 Octane hurt this motor at 25:1 full synthetic Oil?

I put this engine on a Hangar Nine 1/4 Scale DeHavilland Tiger Moth. I have had four flights on this plane/engine. I really like the engine. It idles very well and has tons of power. I am using a 20X8 Xoar prop and there is plenty of pull. The idle is fantastic and the sound is awesome. I have not had any issues with it thus far. I did run the engine on the ground for break in using approximately 40:1 mix. I was able to start the engine by hand from the start and have been able to hand start it, although it seems to take a few more flips than I would like. I am inclined to believe that the problem is with my fuel supply setup and not the engine. I am using a two line fuel set up, one for the clunk and one for vent. The fill comes into a "T" that is between the carb and tank. I can see that I am getting some small air bubbles in the line when I am filling the tank, so it stands to reason that air could be getting sucked in to the carb, rather than the fuel. It is a fine engine that runs really well. I have nothing negative to say about this engine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put this engine on a Hangar Nine 1/4 Scale DeHavilland Tiger Moth. I have had four flights on this plane/engine. I really like the engine. It idles very well and has tons of power. I am using a 20X8 Xoar prop and there is plenty of pull. The idle is fantastic and the sound is awesome. I have not had any issues with it thus far. I did run the engine on the ground for break in using approximately 40:1 mix. I was able to start the engine by hand from the start and have been able to hand start it, although it seems to take a few more flips than I would like. I am inclined to believe that the problem is with my fuel supply setup and not the engine. I am using a two line fuel set up, one for the clunk and one for vent. The fill comes into a "T" that is between the carb and tank. I can see that I am getting some small air bubbles in the line when I am filling the tank, so it stands to reason that air could be getting sucked in to the carb, rather than the fuel. It is a fine engine that runs really well. I have nothing negative to say about this engine.

im looking for a biela 4 blade scaleprop for my ngh38cc. What dimensions do u guys recommand? Im considering biela 16*8, 15*9, 14*10 but im not sure wich one will give it the most power rpm ???

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

im looking for a biela 4 blade scaleprop for my ngh38cc. What dimensions do u guys recommand? Im considering biela 16*8, 15*9, 14*10 but im not sure wich one will give it the most power rpm ???

This engine is a winner for the price. Just received mine and everything looks good. The prop im using is an Xoar 19X8. Running it on ASPEN 2stroke fuel with 2pcnt oil mixture.
Im going to mount the engine in a 60" Pitts Python.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This engine is a winner for the price. Just received mine and everything looks good. The prop im using is an Xoar 19X8. Running it on ASPEN 2stroke fuel with 2pcnt oil mixture.
Im going to mount the engine in a 60" Pitts Python.

Atualmente dos melhores motores Gas a 4T e pelo preo no a melhor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Atualmente dos melhores motores Gas a 4T e pelo preo no a melhor

  1. 1
  2. 2
  3. 3
Customer files
Manual Download [0]
Manual Download [0]
No File Name Download [551]
No File Name Download [100]
596414334X435868X17.jpg Download [100]
No File Name Download [100]
NGH38 Download [100]
NGH38 Download [100]
No File Name Download [551]
Hawker Hurricane 2m/NGH38 Download [3]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save