新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

NTMプロップドライブ28から26 1000KV / 235W

NTMプロップドライブ28から26 1000KV / 235W

Now save save AU$15.38 AU$15.38

Special Price AU$6.59 AU$6.59

You save save AU$15.38 AU$15.38

Was  AU$21.97

在庫切れ!
Stock:
OUT OF STOCK
重量:
68 g
SKU:
NTM2826-1000

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

NTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリングとの堅固な性能のアウトランナーのあるプラス彼らはQCは材料加工からはるばる最終ダイノテストに至るまで、14ポイントでチェックされています。
我々が設計し、社内(3D / 2Dから資材調達、加工、バランスをとる、最終組立とダイノへの描画)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。

当社のQCエンジニアはHobbyKing.com倉庫に出荷する前に、各モータをチェックして、バランスをとります。

仕様:
モデル:2826 1000 KV NTMプロップドライブシリーズ
KV:1000rpmで/ V
ポーランド:3
モーター風:19T
最大電流:15A
最大電力:176W @ 11.1V 15V(4S)@(3S)/ 235W
シャフト:3ミリメートル
重量:54グラム
ESC:20〜30A
細胞数:3秒〜4秒Lipoly
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
接続:3.5ミリメートル弾丸 -connector

テストデータを支えます:
9x4.7 - 11.1V / 113W / 10.2A / 0.632キロの推力
9x6 - 14.8V / 220W / 14.9A / 0.937キロの推力

注意:付属のパックは、このモーターのために利用可能です。以下の関連項目をご参照ください。

Product
Specifications

追加情報

  • 単位:
    NTM2826-1000
  • Brand:
    いいえ
  • 重量(g )
    68.00
  • 長さ
    100.00
  • Width:
    40.00
  • 高さ:
    65.00
  • KV ( RPM / V )
    1000.00
  • 最大電流( A )
    15.00
  • 電力( W ):
    235.00
  • 長さB ( mm)の:
    28.00
  • ことができます長さD (ミリメートル)
    14.00
  • 最大電圧( V )
    15.00
  • シャフトA (ミリメートル):
    3.00
  • Unit Weight (g):
    54
  • 直径C (ミリメートル)
    28.00
  • 総丈E (ミリメートル)
    41.00
  • 抵抗( MH ):
    0.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good little outrunner, I have noticed that there does appear to be slight bearing movement but doesn't affect operation. Nice quiet little unit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Really little motor, smaller than the images seem to be.

Make attention to the fact the rotor is 'inversed' I will post some video about it.

it seems to be a really nice power/weight ratio.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These motors are rock steady for the price. I have them on a 650mm quad and they do a great job. Running them with 20a esc's and have had no problems. Don't forget to get the prop adapters.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
the real problem of this motor is the BEARINGS.
my advice is not to buy.
I bought this because i'm a beginner
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good motor just dont expect to break any speed records very good for a trainer plane such as the bixlers
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Installed these on my Q450 (upgraded from 2210n) and they made a huge difference. Same KV rating, but loads more power!
Nicely balanced and reasonably quiet, I flew around for 30 mins or so, getting through 2 LiPo's while fighting the breeze and the motors (and batteries) stayed nice and cool.

Definitely worth the money.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
nice littel slow flyer motor. dynamically balanced but came with defective rear ball bearing. runs almost vibrationless after ball bearing was replaced. grub screw at the rear end was secured using some red colored screwlock. needed to wipe off the excess that did not cure.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bad bearing...bought 6 of them..2 craps because of bad bearing..dont really recommend this motor unless you want to change the bearing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
moteur de qualit pour le prix
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have recently bought 5 of these motors for a quad copter. 4 for the quad and 1 extra based on reviews. One of these motors was bad from the factory and would barely turn when put on the quad. Thankfully HK made it good and gave me credit. The first time I flew the quad on about the third flight 3 of the 4 motors broke, each loosing the circlip and the shaft either coming part or all the way out of the motor. Please don't waste your money on these motors for you quad they are horrible and will not hold up.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • HK X900 Tricopter with NTM Prop Drive 28-26 1000KV motors

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。