新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

NTMプロップドライブ28-36 1000KV / 400Wブラシレスモーター

NTMプロップドライブ28-36 1000KV / 400Wブラシレスモーター

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
110 g
SKU:
NTM2836-1000

Combine

essential items and
esc
acc
商品概要

NTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリングとの堅固な性能のアウトランナーズです加えて、彼らは、材料加工からはるばる最終ダイノテストに至るまで、14ポイントでQCをチェックされます。
我々が設計し、社内(3D / 2Dから資材調達、加工、バランスをとる、最終組立とダイノへの描画)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。

当社のQCエンジニアはHobbyKing.com倉庫に出荷する前に、各モータをチェックして、バランスをとります。

仕様:
モデル:NTMプロップドライブシリーズ2836 1000kv
KV:1000rpmで/ V
ポーランド:3
モーター風:14T
最大電流:30A
最大出力:400W
シャフト:4ミリメートル
重量:89グラム
ESC:30〜40A
細胞数:3秒〜4秒Lipoly
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
接続:3.5ミリメートルの弾丸コネクタ

テストデータを支えます:
11x7E - 11.1V / 220W / 20A / 976グラム推力
11x7E - 14.8V / 412W / 27.7A / 1.485キロの推力
12x6E - 11.1V / 215W / 20A / 1.08キロ推力
12x6E - 14.8V / 430W / 29A / 1.42キロ推力
13x4E - 11.1V / 223W / 20A / 1.06キロ推力
13x4E - 14.8V / 400W / 27A / 1.48キロ推力

注意:付属のパックは、このモーターのために利用可能です。以下の関連項目をご参照ください。

Product
Specifications

追加情報

  • 単位:
    NTM2836-1000
  • Brand:
    いいえ
  • 重量(g )
    110.00
  • 長さ
    90.00
  • Width:
    50.00
  • 高さ:
    50.00
  • KV ( RPM / V )
    1000.00
  • Unit Weight (g)
    89
  • 最大電流( A ):
    30.00
  • 抵抗( MH ):
    0.00
  • 最大電圧( V )
    15.00
  • 電力( W )
    400.00
  • シャフトA (ミリメートル):
    4.00
  • 長さB ( mm)の:
    36.00
  • 直径C (ミリメートル)
    28.00
  • ことができます長さD (ミリメートル)
    25.00
  • 総丈E (ミリメートル):
    56.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I do NOT suggest this motor for a fixed wing plane!!!
The 3 pole configuration make it accelerate very very very slowly, initially I thought that the esc is faulty... also try to change timing since the auto does not work very well in some controllers (2-3Amps more). Keep in mind that "big" size props are needed in order to give sufficient thrust or airspeed (other 1000kV motor need significantly smaller props). Fitting a "huge" 11/7 or 12/6 is the way to go on 3s, but you only get 14-15A.
Disappointing performance on a Hobbyking /Hyperion ENIGMA the plane was flyable but did not have the speed/power for maneuvers, or to handle windy conditions.
On the other hand built quality is good, total weight including prop and base mount is 101gr
Maybe in a multirotor this motor will give better results...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this one for my Dragonfly 1800 with stock propeller, works great and power is plenty with 3S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I to have used this motor with a Phoenix 2000 glider 225 watts using a 10/6 prop motor does get warm but really pulls the glider around so I going use sub-trim to cut the throttle back a tad to under 200 watts using my watt meter.Very happy with this motor worked out of the box.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
No way to attach propeller, completely useless!

Looks like a prop hub could be bolted on, shame it wasn't included with the motor. Swapped shaft around, no good.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
purchased two of these first one on test bed with 11x7 prop would not go above 1/3 revs before shutting down. tested speed controller on another motor works fine. will spin up a smaller ie 9x5 no problem. Second motor was tested in the same way a about 1/3 revs the whole motor shot apart breaking the shaft. Either the clip on the back came off or it was missing in the first place fitted new shaft it will run but very rough indicating to me it shot a bearing coming apart. In the throws of sending them back or throwing them in the bin and consider lesson learnt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor ist ein Hitzkopf, Leistung wird in Wrme umgewandelt, nach 5 Flge bereits eine schwarze Wicklung und Temperaturen die den Magneten schadet. Keine Kaufempfehlung
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Profitant d'une offre promotionnelle de Hobby King, j'ai achet? ce moteur de tr?s bonne qualit? au prix imbattable de 7?30 soit ? 50pcnt de son prix de vente normal.

Il est pr?vu d'?tre mont? sur un Fun-Fly de 1m20 est d'un poids de 1.2Kg, au vu des essais de traction fourni dans les commentaires sur le moteur cela devrai me donner un bon rapport poids/puissance

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Purchased two of these motors, the 1000kv and a 1400kv for a 2 meter glider. The ratings are a bit overstated, try it and find out the hard way. Hot motors melting insulation, etc. But my biggest gripe is the bearings and end float. The 1000kv on test sheared it's shaft due to vibration at half throttle the prop narrowingly missing my face. Replaced the motor with 1400kv version. Vibration again. Changed folding prop set up to verify what was causing the problem. Definitely the motor. No impressed and wasting my time. Have since purchased Turnigy 28mm XP series. Hopefully these will perform.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A really good motor. There aren't any problems. Still use it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought this for my Phoenix 2000 glider. Using the stock 10x6 prop, blueseries 30A ESC and 1500 3S battery I got the following results;

22 Amps

11.4 Volts

250 Watts

A bit high on the amps and the motor does get quite hot but it performs well and propels the glider with ease.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。