新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

NTMプロップドライブ50-50 580KV / 2000W

NTMプロップドライブ50-50 580KV / 2000W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
405 g
SKU:
NTM5050-580

Combine

essential items and
acc
商品概要

NTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリングとの堅固な性能のアウトランナーズです加えて、彼らは、材料加工からはるばる最終ダイノテストに至るまで、14ポイントでQCをチェックされます。

我々が設計し、社内(3D / 2Dから資材調達、加工、バランスをとる、最終組立とダイノへの描画)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。

当社のQCエンジニアはHobbyKing.com倉庫に出荷する前に、各モータをチェックして、バランスをとります。

仕様:
モデル:NTMプロップドライブシリーズ50-50 580kv
KV:580rpm / V
最大電流:90A
最大電力:2000Wする@ 22.2v(6S)
シャフト:8ミリメートル
重さ:347グラム
ESC:100A
細胞数:4秒〜6秒Lipoly
ボルト穴:30ミリメートル
ボルトねじ:M4
接続:4ミリメートルブレットコネクタ

テストデータを支えます:
14x8 - 14.8V / 587W / 40.3A / 2.9キロの推力
14x8 - 18.5V / 1077W / 60.7A / 4.03キロ推力
14x8 - 22.2V / 1906W / 88.2A / 5.36キロ推力
15x8 - 14.8V / 626W / 43.6A / 3.3キロの推力
15x8 - 18.5V / 1165W / 64.2A / 4.85キロ推力
15x8 - 22.2V / 1961W / 88.8A / 6.15キロ推力

Product
Specifications

追加情報

  • 単位:
    NTM5050-580
  • Brand:
    N/A
  • 重量(g )
    405.00
  • 長さ
    158.00
  • Width:
    53.00
  • 高さ:
    95.00
  • KV ( RPM / V )
    580.00
  • Unit Weight (g)
    347
  • 最大電流( A ):
    90.00
  • 抵抗( MH ):
    0.00
  • 最大電圧( V )
    22.00
  • 電力( W )
    2000.00
  • シャフトA (ミリメートル):
    8.00
  • 長さB ( mm)の:
    50.00
  • 直径C (ミリメートル)
    50.00
  • ことができます長さD (ミリメートル)
    30.00
  • 総丈E (ミリメートル):
    76.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Motor's internally glued (fail) stator came unglued and damaged the coils.

HOBBYKING FAILED TO HONOR THEIR WARRANTY SAYING I "OPENED" THE MOTOR AFTER SLIDING THE STATOR FROM THE OUTER SHELL.

Find a different business, these people are a joke.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using this motor in a 3D hobbies YAK and it has gobs of power, way more than is needed to 3D this plane. I'm using 6S and a 15x6E APC prop. I did have to replace the retaining clip on the shaft after a dozen flights or so but have not had any issues at all with the rest of the motor (no problems with magnets, etc.) at least yet. For the money it is quite the powerhouse.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Sweet motor, I installed it in a phoenix tiger 3 40 to 55 size
With turnigy AE 80amp speedie 6s turnigy 5000mah battery
13x8 apc prop it's pulling 1598watts at 64 amps only had the chance to fly it once (dam work keeping me from flying ) it has awesome
Power great vertical, when I pulled up it almost went out of sight
Can't wait to get out this weekend
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is NOT shown with any mounting hardware, but it does say which mounting hardware to order. Secondly if you look close at the motor picture you can clearly see that the mounting hardware needs to go were the motor shaft is, or you need to mount the motor inside the mounting interface so that the shaft is pointing forward.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good. Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello

After putting this motor in my P40 ( 1650mm )on 6S with 16*10 prop it's power is very good.
Only my motor became loud, checking motor and also this motor from NTM has loose magnets. HK you should do something about this because all bigger motors from NTM have this problem. In you're add saying only quality etc but loose magnets is the worse thing that can happen with you flying yours expensive plane....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor shows up with no mounting brackets or way to attach prop. Without these components the motor is worthless.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
An excellent motor, mounted into a Wot 4 XL with a 100amp ESC, original motor was a SC 120 4 stroke, don't really notice the difference other than the noise and cleanliness of the plane when flown, my view is ya can't go wrong with this...Great, keep up the good work HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just got this motor ,it appears to be well made.have test run it to 40 amps so far no problem but would like to know what brand/type of prop hk used for their test data
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a strong Motor. I fit it in a 81" Piper. First I tested the engine in a test bench.
I use a 5S Zippy-LiPo 4500 mAH
Propeller 1: Turnigy Ultra-Light wood 15x6
54,3 A, 1005 Watt, 5,1 Kg Schub
Propeller 2: TGS - Sport 15x8
70,1 A, 1322 Watt, 4,5 Kg Schub
ESC: YEP 100 A 2-6S
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • NTM Prop Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。