New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

NTMプロップドライブシリーズ28から26 1100kv / 252ワット(短軸バージョン)

NTMプロップドライブシリーズ28から26 1100kv / 252ワット(短軸バージョン)

Now save save AU$0.00 AU$0.00

AU$21.76
ステータス:
在庫切れ!
重量:
80 g
SKU:
NTM2826S-1100
WANT FREE SHIPPING? Click here to find out more!

これが私たちの人気のNTM 28から26 1100kvブラシレスアウトランナーモーターの短いシャフトバージョンです。それはあなたが簡単に任意の変更を必要とすることなく、あなたのマルチロータフレームに、このモーターをマウントすることができていない外部軸で構築されています。

NTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリングとの堅固な性能のアウトランナーズです加えて、彼らは、材料加工からはるばる最終ダイノテストに至るまで、14ポイントでQCをチェックされます。
我々が設計し、社内(3D / 2Dから資材調達、加工、バランスをとる、最終組立とダイノへの描画)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。
当社のQCエンジニアはHobbyKing.com倉庫に出荷する前に、各モータをチェックして、バランスをとります。

仕様:
モデル:NTMプロップドライブシリーズ2826 1100kv
KV:1100rpm / V
ポーランド:12
モーター風:17T
最大電流:20A
最大電力:189W @ 11.1V 15V(4S)@(3S)/ 252W
重量:54グラム
ESC:20〜30A
細胞数:3秒〜4秒Lipoly
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
接続:3.5ミリメートルの弾丸コネクタ

プロップテスト:
8×4 - 11.1V / 100W / 9.1A / 0.54キロ推力
8×4 - 14.8V / 116W / 14A / 0.82キロ推力
9x6 - 11.1V / 149W / 13.6A / 0.73キロ推力
9x6 - 14.8V / 285W / 19.6A / 1.05キロ推力

注意:付属のパックは、このモーターのために利用可能です。以下の関連項目をご参照ください。

  • 単位 NTM2826S-1100
  • Brand NTM
  • 重量(g ) 80.00
  • 長さ 70.00
  • Width 35.00
  • 高さ 60.00
  • KV ( RPM / V ) 1100.00
  • 最大電流( A ) 20.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 15.00
  • 電力( W ) 300.00
  • シャフトA (ミリメートル) 0.00
  • 長さB ( mm)の 28.00
  • 直径C (ミリメートル) 28.00
  • ことができます長さD (ミリメートル) 15.00
  • 総丈E (ミリメートル) 29.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Motore molto valido nelle prestazioni

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motore molto valido nelle prestazioni

As others have stated the bearings let these motors down however it isn't as simple as bad bearings the problem is actually with the recess the bearings push into. It is only the top bearing that is problematic on my motors, I have 4 and all are poor. Out of the motor the bearings feel fine however when you push them in it closes up and becomes 'notchy', clearly the recess is machined just a touch too small.

In addition you might notice the motors making a noise which I found to be due to radial play. There is a small grub screw which holds the casing to the shaft allowing you to adjust the preload on the bearings reducing the clearance.

The rest of the motor seems fine however I can't recommend them due to the above problem and am considering trying to get my money back.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As others have stated the bearings let these motors down however it isn't as simple as bad bearings the problem is actually with the recess the bearings push into. It is only the top bearing that is problematic on my motors, I have 4 and all are poor. Out of the motor the bearings feel fine however when you push them in it closes up and becomes 'notchy', clearly the recess is machined just a touch too small.

In addition you might notice the motors making a noise which I found to be due to radial play. There is a small grub screw which holds the casing to the shaft allowing you to adjust the preload on the bearings reducing the clearance.

The rest of the motor seems fine however I can't recommend them due to the above problem and am considering trying to get my money back.

I ordered 4 of these for a quadcopter. In the initial testing, one of them does not work at all and another runs rough. The other two seem fine. Also the recommended accessory pack has the wrong hole pattern for the bottom attachment.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered 4 of these for a quadcopter. In the initial testing, one of them does not work at all and another runs rough. The other two seem fine. Also the recommended accessory pack has the wrong hole pattern for the bottom attachment.

Ordered 4 and at least two have rough feeling bearing that rattle, all four have play in them. I opened a support case for them and hobbyking have not even had the decency to reply.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered 4 and at least two have rough feeling bearing that rattle, all four have play in them. I opened a support case for them and hobbyking have not even had the decency to reply.

Smooth, powerful and cheap, I put them on a SK450, motors react very quickly to stabilize, and takes off like a rocket when you mash on the launch stick. No issues like others have said.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Smooth, powerful and cheap, I put them on a SK450, motors react very quickly to stabilize, and takes off like a rocket when you mash on the launch stick. No issues like others have said.

Nice motors, pretty good build quality and no rattling bearings. Really. I've read tons of reports about bearings being bad on these motors. And even if they were bad from HK, they are cheap and there are higher performance bearings available too.

Anyway, these motors start to smell at about 15Amps. Didn't drove them to 20 and hope I'll never will but I'm sure they will burn in 10s. at 20A.

But, If worst comes my way, I'll rewind them with better wires.

Running them on 30A BEC-less Multistar ESCs.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice motors, pretty good build quality and no rattling bearings. Really. I've read tons of reports about bearings being bad on these motors. And even if they were bad from HK, they are cheap and there are higher performance bearings available too.

Anyway, these motors start to smell at about 15Amps. Didn't drove them to 20 and hope I'll never will but I'm sure they will burn in 10s. at 20A.

But, If worst comes my way, I'll rewind them with better wires.

Running them on 30A BEC-less Multistar ESCs.

Die Motoren haben Trotz Ihrer kleinen gre Leistung ohne Ende. Sie versetzen meinen Quadcopter mit X666 Rahmen in Extreme Geschwindigkeiten. Was mich jedoch strrt ist das die Motoren von anfang an Spiel in den Kugellagern haben.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Die Motoren haben Trotz Ihrer kleinen gre Leistung ohne Ende. Sie versetzen meinen Quadcopter mit X666 Rahmen in Extreme Geschwindigkeiten. Was mich jedoch strrt ist das die Motoren von anfang an Spiel in den Kugellagern haben.

tres bon moteur, fonctionne parfaitement avec une helice 9x5 e-prop, une lipo 4S 5000mah et un esc Hk blue serie 30A.

j'en ai commande 8 pour mon mini octocopter FPV. merci HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

tres bon moteur, fonctionne parfaitement avec une helice 9x5 e-prop, une lipo 4S 5000mah et un esc Hk blue serie 30A.

j'en ai commande 8 pour mon mini octocopter FPV. merci HK.

I have 8 of these on an X525 converted to an X8 to compete my friends SkyHero Y6.
I also have three of them on an FPVlabs Tri-copter. Hundreds of flights, dozens of crashes and all are still running strong. Correctly rated and BALANCED props go a long way in reducing premature wear. Over propping any motor or having a too heavy craft will eat the bearings up. Go with 8x4's if you are running 4s, you will use almost 60pcnt less power than the 9x6 while only loosing .2kg of thrust. 9's are fine on 3S. I wouldn't put 10's on at all.
Another tip is to throw away the bullet style nuts and get some nylock nuts, the bullets are virtually impossible to balance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have 8 of these on an X525 converted to an X8 to compete my friends SkyHero Y6.
I also have three of them on an FPVlabs Tri-copter. Hundreds of flights, dozens of crashes and all are still running strong. Correctly rated and BALANCED props go a long way in reducing premature wear. Over propping any motor or having a too heavy craft will eat the bearings up. Go with 8x4's if you are running 4s, you will use almost 60pcnt less power than the 9x6 while only loosing .2kg of thrust. 9's are fine on 3S. I wouldn't put 10's on at all.
Another tip is to throw away the bullet style nuts and get some nylock nuts, the bullets are virtually impossible to balance.

Fantastic motors! They run cool even under a very high load, and are almost silent. Great set of motors for my quad(1-1.5kg)!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic motors! They run cool even under a very high load, and are almost silent. Great set of motors for my quad(1-1.5kg)!

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save