サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

NTMプロップドライブシリーズ28-26Aの1200kv / 286ワット(短軸バージョン)

Generating Links

NTMプロップドライブシリーズ28-26Aの1200kv / 286ワット(短軸バージョン)

価格:

Now save 節約 ¥1,587.97 ¥1,587.97

Special Price ¥829.13 ¥829.13

You save 節約 ¥1,587.97 ¥1,587.97

Was  ¥2,417.10

購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
NTM2826S-1200
送料無料したい? クリックする こちらへ 詳細情報を参照する

これが私たちの人気のNTM 28-26A 1200kvブラシレスアウトランナーモーターの短いシャフトバージョンです。それはあなたが簡単に任意の変更を必要とすることなく、あなたのマルチロータフレームに、このモーターをマウントすることができていない外部軸で構築されています。

NTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリングとの堅固な性能のアウトランナーズです加えて、彼らは、材料加工からはるばる最終ダイノテストに至るまで、14ポイントでQCをチェックされます。

我々が設計し、社内(3D / 2Dから資材調達、加工、バランスをとる、最終組立とダイノへの描画)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。

当社のQCエンジニアはHobbyKing.com倉庫に出荷する前に、各モータをチェックして、バランスをとります。

仕様:
モデル:NTMプロップドライブシリーズ28-26Aの1200kv(短軸バージョン)
KV: を1200rpm / V
最大電流:17A
最大電力:215Wの@ 12V(3S)/ 286Wする@ 15V(4S)
シャフト:3ミリメートル
重量:57.6グラム
ESC:20A
細胞数:3秒〜4秒Lipoly
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
接続:3.5ミリメートルの弾丸コネクタ

プロップテスト:
7x6E - 11.1V - 90W - 8A
7x6E - 14.8V - 192W - 13A
8x4E - 11.1V - 100W - 9A
8x4E - 14.8V - 222W - 15A
8x6E - 11.1V - 145ワット - 13A

注意:付属のパックは、このモーターのために利用可能です。以下の関連項目をご参照ください。

  • KV ( RPM / V ) 1200.00
  • 最大電流( A ) 17.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 15.00
  • 電力( W ) 286.00
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 26.00
  • 直径C (ミリメートル) 28.00
  • ことができます長さD (ミリメートル) 15.00
  • 総丈E (ミリメートル) 29.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Jason | 確認済みの購入者

  • Overall
  • Quality
  • Value

Pretty good

Oct 13, 2018

Got these on sale for $5 and they are okay. I wouldn't pay full price for them but on sale sure. The motors are pretty well balanced but bearings do wear after a little bit. Also the motor wires are not silicone wires they are the same enamel copper wire that the motor its wrapped with. Probably wouldn't cost much more to add better bearings and better wires.

tm | 確認済みの購入者

  • Overall
  • Quality
  • Value

cant beat the price!

Feb 06, 2017

what a deal, sure they have crappy bearings, just open them up, grease the bearings, locktite the grub screw and they are ready to go for many flights. clean and grease the bearings every now and then and you cant beat these. bearings go bad? just throw in another motor, at these prices who cares. plenty of power on my 400 quad and very smooth

IJSSS | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 01, 2016

Average outrunner, I guess you get what you pay for. By the first or second flight the bearings already have movement and motor starts making noises, still seem to function ok but for how long?

purkox | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 23, 2016

These motors are terrible! I used them on my quad and all the bearings broke within the first few flights ad they are super loud. After around 10 flights or so the bullet connectors started to break of and fall off the quad. I would recommend to stay away from ntm in general, waste of time and money.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 18, 2016

Great product, perfect for ft flyers

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 31, 2015

Runs smoothly and strongly. note the wattage, this motor is no joke, overkill for my scratch built plane

krashNburn | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2015

i use this 1200kv motors in my Dart 400 quad. performance is fantastic. I put scorpion oil in the bearings so they are ok for now. After 3 months the bearings still sound okay but not very smooth. It works well with my F-20A esc with simonk fw. 8 inch carbon filled props work well on 3s and 4s lipo and it does not even get warm. Will have to try the multistars if these motors fail. APC mr props also work very well with these motors. the 8045SF props cause too much vibration so i don't use them with these anymore.

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 11, 2014

trs bon rapport qualit prix

trs puissant ( f450)

foamflight | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Jun 10, 2014

I am using four of these motors in a quad and they have been fantastic, the amount of power that these little motors put out is very impressive. My one complaint is that one of the motors has a bearing going out and it sounds like a can of rocks in there. However it is still working just fine for now... Over all I would highly recommend this motor!

Thomas | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 23, 2014

Bought these motors for my very first quad. Super impressed, took all the impacts and crashes I dished out at them and then some. Can't beat these bad boys for the price. Would have given 5 stars but the writing on the side rusted on me, otherwise, 2 years of use and going strong.

  1. 1
  2. 2
  3. 3
顧客ファイル
Ecks frame with ntm 1200 Download [1173]
bad bunch Download [3118]
necked motor Download [2736]
bottom bearing Download [2431]
top bearing Download [2207]
bearings Download [1976]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

Related Tags