サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

NTMプロップドライブシリーズ28-30 900kv / 300Wブラシレスモーター

Generating Links

NTMプロップドライブシリーズ28-30 900kv / 300Wブラシレスモーター

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,981.01
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
171000437-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

NTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリングとの堅固な性能のアウトランナーズあり、加えて、彼らは、材料加工からはるばる最終ダイノテストに至るまで、14ポイントでQCをチェックされます。

我々が設計し、社内(CAD 3D図面から材料調達、加工、バランスをとる、最終組立とダイノに)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。

当社のQCエンジニアはHobbyKing.com倉庫に出荷する前に、各モータをチェックして、バランスをとります。

仕様:
モデル:NTMプロップドライブシリーズ28-30 900kv
KV:900rpm / V
最大電流:18A
最大電力:215Wの@ 12V(3S)/ 300Wする@ 15V(4S)
シャフト:3ミリメートル
重量:66グラム
ESC:25〜30A
細胞数:3秒〜4秒Lipoly
ボルト穴:16ミリメートル&19ミリメートル
ボルトねじ:M3
接続:3.5ミリメートルの弾丸コネクタ

注意:付属のパックは、このモーターのために利用可能です。以下の関連項目をご参照ください。

  • KV ( RPM / V ) 900.00
  • 最大電流( A ) 18.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 15.00
  • 電力( W ) 300.00
  • シャフトA (ミリメートル) 3.00
  • 長さB ( mm)の 30.00
  • 直径C (ミリメートル) 28.00
  • ことができます長さD (ミリメートル) 18.00
  • 総丈E (ミリメートル) 45.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

  • NTM 28 Series Motor Size Explained
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Nicolas | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

May 21, 2015

good motor. I use it to power my big quadcopter. It works well with the afro esc 30A and a 4s 5000mah LiPo!
They have enough power but next time I probably would buy a bigger one... :)

| 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 20, 2015

Good motor. Using it with 10" props. Bad bearings though

Bakerman | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 24, 2014

has bought four engines before and they work perfectly.

Dom These engines are really bad in the solder, and the cable was broken by just where the 3.5mm connector is soldered. Metal wires are not of the best quality copper.

breaks off, at minimum load. very bad Hobby King. improve the era of quality assurance.

Paul | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 11, 2014

Awful motors. I fitted these to my Talon Tri with 10x4.5SF props. I under-mounted them and fitted the prop to the shaft using a HK 3mm collet-type adapter. First thing I noticed was the shaft/bearings had some play in them, but they ran smooth so I thought I'd try them anyway.
It hovered ok but as soon as I gave it full throttle there was a bang, then another as my tri hit the floor. The shaft had snapped on the rear motor. It seems a 3mm shaft simply isn't up to dealing with a prop that will take advantage of the motors (300w) power.
On closer inspection I found the bearings had gone in the other two motors, too. Plus the E-clip had worked off on one of them. This is after 2 mins air time!
On top of that.. these aren't 28-30 motors. That is the measurement of the OUTER CASING not the stator.
Overall, very disappointing.

bill987 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 25, 2014

Very good motor. Put 4 of theme on a B-17 Balsa wingspan 1m80 . Well done

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!