New Items フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

NTMプロップドライブシリーズ42-48 650KV / 1295W

NTMプロップドライブシリーズ42-48 650KV / 1295W

Discontinued Product

Please continue searching for a similar product.
SKU:
NTM4248-650
WANT FREE SHIPPING? Click here to find out more!

QCは、材料加工からはるばる最終ダイノに至るまで、14ポイントでチェックされているNTMプロップドライブモータがタイトな巻線、高品質のベアリング、正しく評価磁石、バランスのとれたステータとフラックスリング、工具鋼シャフト加えて、彼らとの堅固な性能のアウトランナーズありますテスト。

我々が設計し、社内(3D / 2Dから資材調達、加工、バランスをとる、最終組立とダイノへの描画)完全にこれらのモータを構築するので、我々は完全に生産を制御し、右のあなたに製品を出荷するまで、設計から製品の一貫性を確保することができます。ミドル男性の除去は、我々は市場に優れた価値を駆動し、工場でこれらのモータを小売りすることができます(私たちの)価格を意味しています!すべてのパフォーマンスの数値は、実際と私たち自身のモータdynos上でテストされています。

当社のQCエンジニアのチェック・アンド・バランスHobbyKing.com倉庫に出荷する前に、各モータ。

仕様:
モデル:NTMプロップドライブシリーズ4248 650kv
KV:650rpm / V
オン:7Tを
最大電流:70A
最大出力:1295W
シャフト:5ミリメートル
重さ:243グラム
ESC:60〜70A
細胞数:4〜5秒Lipoly
ボルト穴:25ミリメートル
ボルトねじ:M3
接続:4ミリメートルブレットコネクタ

  • 単位 NTM4248-650
  • Brand NTM
  • 重量 279.0000
  • 長さ 105.00
  • Packaging Width 30.00
  • 高さ 100.00
  • KV ( RPM / V ) 650.00
  • 最大電流( A ) 70.00
  • 抵抗( MH ) 0.00
  • 最大電圧( V ) 19.00
  • 電力( W ) 1295.00
  • シャフトA (ミリメートル) 5.00
  • 長さB ( mm)の 48.00
  • 直径C (ミリメートル) 42.00
  • ことができます長さD (ミリメートル) 30.00
  • 総丈E (ミリメートル) 70.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use this motor in my Extra 260 (balsa, 1400 mm) with Turnigy Nano-Tech 4S 3300Mah with Turnigy D-Lux 70 Amp ESC.
This motor is a beast! Runs very smooth and has a lot of power. As soon the motor is in stock I will buy one (or two)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this motor in my Extra 260 (balsa, 1400 mm) with Turnigy Nano-Tech 4S 3300Mah with Turnigy D-Lux 70 Amp ESC.
This motor is a beast! Runs very smooth and has a lot of power. As soon the motor is in stock I will buy one (or two)

I run this motor with my Edge 540T EPP/Light Plywood 3D Aerobatic Airplane 1220mm (excellent 3D plane!) on 4s 2200 mAh with a 13x6,5 APC prop. Incredible power and performance. But the motor didn't run very smooth and sounds a little noisy. But till now after 30 flights that wasn't a problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I run this motor with my Edge 540T EPP/Light Plywood 3D Aerobatic Airplane 1220mm (excellent 3D plane!) on 4s 2200 mAh with a 13x6,5 APC prop. Incredible power and performance. But the motor didn't run very smooth and sounds a little noisy. But till now after 30 flights that wasn't a problem.

Ich habe diesen Artikel am 15.07.2015 bestellt und bis heute nicht erhalten wegen angeblicher Backorder. Mehrere Nachfragen wurden mit entspr. Entschuldigungen und Aussreden abgetan.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe diesen Artikel am 15.07.2015 bestellt und bis heute nicht erhalten wegen angeblicher Backorder. Mehrere Nachfragen wurden mit entspr. Entschuldigungen und Aussreden abgetan.

I've been running my NTM now for a few months in a Vortec (which is now discontinued) and I am really happy with this motor so far. It seems to make plenty of power and I like the bolt on prop drive much better than the clamp on style on other motors.
The Vortec the NTM is in is a fairly big semi 3D plane (1400mm WS) and it its a good match, wont do verticals or pull the monokote off it with speed but I haven't played around with props to much. Tried MA style 14x7 3Blade and 14x5 Turnigy wood 3Blade (curranty using and prefer).
Some specs I've done with my Watts-Up: 4s 5000mah Battery
3Blade MA Style 14x7
AMPS- 46 WATTS- 780

3blade Turnigy wood 14x5
AMPS- 49.7
WATTS- 738

2Blade master airscrew 12x6
AMPS- 28
WATT- 465

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've been running my NTM now for a few months in a Vortec (which is now discontinued) and I am really happy with this motor so far. It seems to make plenty of power and I like the bolt on prop drive much better than the clamp on style on other motors.
The Vortec the NTM is in is a fairly big semi 3D plane (1400mm WS) and it its a good match, wont do verticals or pull the monokote off it with speed but I haven't played around with props to much. Tried MA style 14x7 3Blade and 14x5 Turnigy wood 3Blade (curranty using and prefer).
Some specs I've done with my Watts-Up: 4s 5000mah Battery
3Blade MA Style 14x7
AMPS- 46 WATTS- 780

3blade Turnigy wood 14x5
AMPS- 49.7
WATTS- 738

2Blade master airscrew 12x6
AMPS- 28
WATT- 465

I am using this motor in my FMS 1400mm planes, I use it with a 3000mah 40c 5s battery, an 80 or 85 amp speed controller, and a 13x8 master airscrew 3 bladed prop. it has significantly more power than the stock FMS motors running the same everything else. A highly recommended upgrade! I have probably at least six of these currently flying and I just recently had a magnet come loose on one of them. Otherwise they have been great, tons of power. Magnet fix is easy, just take the motor apart and slide out the magnet, clean underneath where it goes and CA it and pop it back in.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this motor in my FMS 1400mm planes, I use it with a 3000mah 40c 5s battery, an 80 or 85 amp speed controller, and a 13x8 master airscrew 3 bladed prop. it has significantly more power than the stock FMS motors running the same everything else. A highly recommended upgrade! I have probably at least six of these currently flying and I just recently had a magnet come loose on one of them. Otherwise they have been great, tons of power. Magnet fix is easy, just take the motor apart and slide out the magnet, clean underneath where it goes and CA it and pop it back in.

very nice motor, good quality
i would rate it as 620kv not 650kv
a 650kv should give 670kv at 18v no load
a 600kv will give 620kv
this one no load is 640kv

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice motor, good quality
i would rate it as 620kv not 650kv
a 650kv should give 670kv at 18v no load
a 600kv will give 620kv
this one no load is 640kv

NTM 42-48 650kv. Bought two of these for a WOTs Wot 6lb AUW and another project. Described wattage would mean you pulling 70 amps. I got 70 amps at 85pcnt throttle using 5 cell LiPo with 13x8. Strong magnets, needs 3 bolt NTM prop adaptors (not supplied) and my worse complaint - two motors both with poor bearings, play side to side. How long the motor will last I don't know but my electric planes have their own flight battery so dead stick means glide back landings. A bit more QC on the bearings would 've got his motor at least 4 crowns!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

NTM 42-48 650kv. Bought two of these for a WOTs Wot 6lb AUW and another project. Described wattage would mean you pulling 70 amps. I got 70 amps at 85pcnt throttle using 5 cell LiPo with 13x8. Strong magnets, needs 3 bolt NTM prop adaptors (not supplied) and my worse complaint - two motors both with poor bearings, play side to side. How long the motor will last I don't know but my electric planes have their own flight battery so dead stick means glide back landings. A bit more QC on the bearings would 've got his motor at least 4 crowns!

Gewicht 246g mit 7cm Kabel inkl 4mm Goldkontaktstecker

freie Motorachse 19,3mm Durchmesser 5mm

Motorgehaeuse gesamt 51mm lang Durchmesser 42,4mm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gewicht 246g mit 7cm Kabel inkl 4mm Goldkontaktstecker

freie Motorachse 19,3mm Durchmesser 5mm

Motorgehaeuse gesamt 51mm lang Durchmesser 42,4mm

El Motor cumple con las especificaciones de diseo que marca la ficha expuesta en la pgina, funciono a la perfeccin en el banco de pruebas, y dentro de tu modelo lo har de maravilla (en mi caso fue un avin).
Me encanta que la serie NTM sea fcil de ocupar y muy intuitiva, simplemente conectas al SpeedController, la batera y listo, no se necesita PropAdapter, solo el paquete de accesorios que se vende que incluye el Spinner de seguridad, la bancada y los tornillos, el cual es de excelente calidad y un precio muy accesible, sin mencionar que es indispensable.
El nico detalle es que viene empacado en una bolsa de plstico, y envuelto con plstico acolchado, yo esperaba algo ms, pero llego sin ningn golpe ni abolladura.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

El Motor cumple con las especificaciones de diseo que marca la ficha expuesta en la pgina, funciono a la perfeccin en el banco de pruebas, y dentro de tu modelo lo har de maravilla (en mi caso fue un avin).
Me encanta que la serie NTM sea fcil de ocupar y muy intuitiva, simplemente conectas al SpeedController, la batera y listo, no se necesita PropAdapter, solo el paquete de accesorios que se vende que incluye el Spinner de seguridad, la bancada y los tornillos, el cual es de excelente calidad y un precio muy accesible, sin mencionar que es indispensable.
El nico detalle es que viene empacado en una bolsa de plstico, y envuelto con plstico acolchado, yo esperaba algo ms, pero llego sin ningn golpe ni abolladura.

These motors are really good never had a problem with them

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These motors are really good never had a problem with them

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
prop Download [47]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save