新規登録

Product Finder

設定

Useful links

 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global

OrangeRX DSMX / DSM2 /ディーヴォ2.4GHzの選択送信モジュール(JR / Turnigy互換)

OrangeRX DSMX / DSM2 /ディーヴォ2.4GHzの選択送信モジュール(JR / Turnigy互換)

QTY:

Now save save AU$0.00 AU$0.00

AU$40.91
Stock:
重量:
79 g
SKU:
9171000536-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

商品概要

OrangeRX切り替え可能な2.4GHzの送信モジュールは、モジュールベースの​​JR / Turnigy互換トランスミッターを利用する、シンプル、便利で安価な方法を提供しています。このユニットは、DSM2(1024 / 22ms、2048 / 11ms)、DSMX(22ms、11ms)またはWalkeraの互換性のあるプロトコルとの間で切り替えることができる固定されたプロトコルを持っている標準モジュールとは異なり。

モジュール4選択可能な電力出力レベルを有しています。単に、あなたの既存のモジュールを取り外しOrangeRX切り替え可能なモジュールをプラグインし、あなたが任意のDSMX、DSM2またはWalkeraの互換性のある受信機にバインドする準備が整いました。この見事なモジュールのもう一つの特徴は、それがAETRまたはTAERのいずれかのための選択可能なチャネルのマ​​ッピングを有することです。

特徴:
•任意のJR / Turnigy互換モジュールベースの​​送信機で動作
•5切替可能モード:DSM2 1024 / 22ms、DSM2 2048 / 11ms、DSMX 22ms、DSMX 11ms、Walkeraの
•4スイッチ選択可能なパワー出力
•簡単にバインドボタンにアクセスするには
•レンジチェックモード
•選択可能なチャネルマッピング

仕様:
互換性: 標準JRスタイル5ピンモジュールベースの送信機(JR / Turnigy互換)
2.4GHzのプロトコル:DSMX / DSM2 / Walkeraの互換性
入力電圧:6 - 18VDC
無線タイプ: フルレンジシステム

含まれています:
OrangeRX DSMX / DSM2 /ディーヴォ互換性の2.4GHzの送信モジュール
2.4GHzのアンテナ

ご注意ください:
OrangeRXモジュールは、結合のためにユニークなグローバルIDを使用します。他のブランドの受信機との結合の問題の場合には、そのモジュールのために予約さ別の一意の値にモジュールIDを変更するには、モジュールに「変更ID」ボタンを押してください。 40億一意のIDのOrangeRxモジュールに割り当てられた上にあります。


ご注意ください:
これは、SPEKTRUM DSM2 / X、Walkeraの製品ではないではありません、どちらも、それはSPEKTRUM DSM2 / DSMX / Walkeraの製品のコピーです。 SPEKTRUMとDSM2 / DSMXブランドはホライゾン趣味USAの登録商標です。 OrangeRX製品は、闇市場や偽SPEKTRUMの製品ではありません。 OrangeRx品質が保証されています。

Product
Specifications

追加情報

  • 単位:
    9171000536-0
  • Brand:
    いいえ
  • 重量(g )
    79.00
  • 長さ
    90.00
  • Width:
    35.00
  • 高さ:
    65.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
It has alot of binding issues with the HH bnf's.

after sitting unused in a drawer over the winter it no longer functions at all
Quality
Value
Overall
Quality
Value
Overall
Hatte gehofft dass, das Devo mit meinem Modell UMX AS3Xtra von E-filte geht. Leider nein. Gaskanal geht nicht.
Quality
Value
Overall
Quality
Value
Overall
Not fit for TGY9X without modifications. Square hole around pins on case back is too small for 9X (9X have tall plastic pins support around metal pins). I'am cut a lot of plastic frome case to make it fit into place. I'am also have 9XR and this module fit into it without any modifications (9XR have longer pins without any plastic support).
Quality
Value
Overall
Quality
Value
Overall
I found this module to work well. With the Taranis, easy set up, I bound it to an integrated dsmx receiver on the quanum pico first time, and also to 1 spektrum and another orange rx.

Im using it for small stuff, so I cant speak for range, but for me its more than sufficient.

Does what it says it does.
Quality
Value
Overall
Quality
Value
Overall
Have had this Tx for a few months and just found out that you cannot use it unless your receivers are all the same mode ie DSM2 or DSMX. when this transmit module is set for Auto detect, it will set itself for the last mode that it bound it's last receiver to. I have 2 orange receivers, an R1020x 10ch which auto binds in DSMX mode & an R615X 6ch which auto binds in DSM2 mode so if I bind the 10ch first then the 6 channel, I can use the 6 channel but not the 10 channel. Same if I bind the 10ch last then I can't go back to the 6 ch while its in auto mode. You have to shut off the radio, remove the TX module and set it to manual & also the mode you need with the dip switches to access the receiver you did the first bind on. Older versions of this type Tx allowed you to switch modes by pressing the bind button quickly 3 times but this one doesn't work that way.
Quality
Value
Overall
Quality
Value
Overall
It works poorly. frequently needs to be rebound to model (sometimes just swapping a battery) other times i have to turn the external RF module on and off several times for the models to start responding to inputs
Quality
Value
Overall
Quality
Value
Overall
I bind it with a Spektrum DSM2 ladybird (all switches to their default value:OFF). It works as advertised. I opened the module and check the soldering with a binocular: it is clean and OK. So far, so good. Very happy for the price.
For OpenTX (2.0.17 or greater) users, the correct settings is: Protocol: PPM / Channels: 1-8 / Frame length: 22.5ms / Polarity: positive / PPM delay: 300us
Quality
Value
Overall
Quality
Value
Overall
Has problems binding and working with nano qx.
Using DSMX, I can get it to bind but the nano gets twitchy with inputs - many similar observations on youtube and forums.
Using DSM2, I can get it to bind in 1024/22ms mode (only switch 3 on), however, sometimes it takes several tries to bind it and the transmitter and the receiver don't remember each other from previous binds so I need to try a couple of times each time.

I hope these problems can be fixed via firmware updates soon to make this a usable product. Reports of using the transmitter with standalone receivers (both DSM2 and DSMX) seem to be fine even though I have not tried these personally.
Quality
Value
Overall
Quality
Value
Overall
I only got 800' range using when when the light goes out. The throttle went to full at 500' when moving the airplane. There was no difference in range when the bind switch was pressed. The power is not reduced to 1mw when the bind button is pressed. If it was the range would be about 5', since that is 70-1 divided by 2, because 4x the power is needed to get twice the range. The range test is completely false. It just feel good. Even if it does like the manual says, that is not good. A range test has to be negative not positive. You should be able to move out of range and the rec. quits. This is a very bad system and should only be used for park flying. Fail safe says it will go to the position at bind. The surfaces do stay straight, but the throttle went to high on an electric. Dangerous. I will try putting the throttle on high to see if it reverses.
Quality
Value
Overall
Quality
Value
Overall
very good module works super great with other orx products!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。