New Items ニュース フォーラム
新規登録

Total Price

AU$0.00

Cart 0 Cart 0 Loading...

OrangeRx R415 DSM2互換性4Chのマイクロ2.4GHzのレシーバー

OrangeRx R415 DSM2互換性4Chのマイクロ2.4GHzのレシーバー

Shipped From:
  • USA
Discontinued Product

Please continue searching for a similar product.
WANT FREE SHIPPING? Click here to find out more!

すべてのDSM2送信機と互換性があります。

完璧な小さなfoamieや屋内受信機。超小型、非常に軽いです!
OrangeRx受信機の新しい範囲は、元の部品を使用し、MCUの、アートSMTの自動化の状態で、毎回高品質の製品を確実にするために構築されています。
すべてのOrangeRx受信機は、QCは、出荷前にテストされています。
OrangeRxはANY DSM2互換2.4GHzの送信機で動作します

OrangeRx R415 4chのマイクロサイズの重量と29x15x8mmで唯一の2.0グラムです。マイクロプレーン、屋内foamiesと小さなparkflyersのために大きいです。

主な機能。
超軽量の2.0グラム!
電圧:3.6〜9V
DSM2 2048分の1024航空無線やモジュールシステムとの互換性
4チャンネル
コンパクト設計の29x15x8mm
ほぼすべての場所に取り付けるための短い29ミリメートルアンテナ。
マイクロモレックス1.25ミリメートル間隔で3ピンconectors

含まれています。
OrangeRx R415 4chのマイクロDS​​M2対応受信機

*注意:
1)これは、SPEKTRUM DSM2製品ではありません、またそれは、SPEKTRUM DSM2製品のコピーです。
SPEKTRUMとDSM2ブランドはホライゾン趣味USAの登録商標です。
2)これは、地下の闇市場偽物SPEKTRUMの製品ではありません。 OrangeRx品質が保証されています。
3)オーストラリアのMAAAにより受け入れ、指導のためMAAA MOP58を参照してください。

  • 単位 R415
  • Brand Orange
  • 容量(mAh ) -
  • 重量 29.0000
  • 長さ 59.00
  • Packaging Width 5.00
  • 高さ 45.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I bought 4 of this receiver, only 1 work. The other 3 has a brownout issue and crashed my brand new plane. Always do range test first before flying and don't use the receiver if it failed on range test. I already crashed my plane before I learned this. I hope this will not happen to others. The good thing is hk gave me credit points for all 3 that have failed. Unfortunately I crashed my aircore airframe because of it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 4 of this receiver, only 1 work. The other 3 has a brownout issue and crashed my brand new plane. Always do range test first before flying and don't use the receiver if it failed on range test. I already crashed my plane before I learned this. I hope this will not happen to others. The good thing is hk gave me credit points for all 3 that have failed. Unfortunately I crashed my aircore airframe because of it.

small compact dsm 2compatible! im using it for small indoor toys

micro

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

small compact dsm 2compatible! im using it for small indoor toys

micro

Small and light receiver. Suited for micro servo connector sold here. Ex. HK-5330. Work from 3V up.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Small and light receiver. Suited for micro servo connector sold here. Ex. HK-5330. Work from 3V up.

Nice little receiver, I've bought a few of these. The HK micro 1.7g servos plug straight in (micro-Molex 'picoblade' connectors) and the pin assignments are shown on the label of the Rx so you can check that your servos match the pinout.

Beware the relatively high minimum operating voltage for 1S applications - I've used these in gliders, with just the servo loads to worry about, and had no problems at all with brownouts or range on 1S, but if you're also driving a motor, most ESCs don't cut the throttle until the voltage drops to around 3.0V, and this Rx is only specified to run down to 3.6v.

HK sell a voltage booster that can (allegedly) supply about an amp at 5.0v from 1S, but if you want to supply the receiver via that and the servos/ESC straight from the LiPo, you'll need to sort out level matching on the signal connections. For 1S powered models with motors, the SuperMicro range of receivers sold by HK now include some DSM2 models with built-in ESC etc, which cost more but probably work out simpler.

Overall, these little receivers are brilliant value and perform very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little receiver, I've bought a few of these. The HK micro 1.7g servos plug straight in (micro-Molex 'picoblade' connectors) and the pin assignments are shown on the label of the Rx so you can check that your servos match the pinout.

Beware the relatively high minimum operating voltage for 1S applications - I've used these in gliders, with just the servo loads to worry about, and had no problems at all with brownouts or range on 1S, but if you're also driving a motor, most ESCs don't cut the throttle until the voltage drops to around 3.0V, and this Rx is only specified to run down to 3.6v.

HK sell a voltage booster that can (allegedly) supply about an amp at 5.0v from 1S, but if you want to supply the receiver via that and the servos/ESC straight from the LiPo, you'll need to sort out level matching on the signal connections. For 1S powered models with motors, the SuperMicro range of receivers sold by HK now include some DSM2 models with built-in ESC etc, which cost more but probably work out simpler.

Overall, these little receivers are brilliant value and perform very well.

A fantastic little RX! I used this, paired with Hobbyking 3A Single Cell ESC (Product=11885), to convert a Ky0sh0 minium warbird which had numerous TX/RX issues. Was fairly close to a PNP refit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A fantastic little RX! I used this, paired with Hobbyking 3A Single Cell ESC (Product=11885), to convert a Ky0sh0 minium warbird which had numerous TX/RX issues. Was fairly close to a PNP refit.

Very good receiver, good quality....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good receiver, good quality....

bon produit rein a dire

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bon produit rein a dire

perfect little receiver for my 900mm mini DLG glider. using Molex to servo-lead adapters. runs on 1s or 2s Lipos. outputs were lableld correctly. had to have power to battery input in order to bind. very nice. Roger

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

perfect little receiver for my 900mm mini DLG glider. using Molex to servo-lead adapters. runs on 1s or 2s Lipos. outputs were lableld correctly. had to have power to battery input in order to bind. very nice. Roger

worked a treat but no leads available.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

worked a treat but no leads available.

This receiver is worthless. It's impossible to bind the receiver to a Spektrum DM8 HF Module. I tried 2 different R415 without success. After long brainstorming with other users I can exclude all other error sources.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This receiver is worthless. It's impossible to bind the receiver to a Spektrum DM8 HF Module. I tried 2 different R415 without success. After long brainstorming with other users I can exclude all other error sources.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
Customer files
UserManual_DX6i_russian Download [1634]
Micro Extra 300 plans Enjoy! Download [641]
Pinout image for connection picture Download [77]
Pinout image for connection picture just Download [77]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking