合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

OrangeRx R614XN DSM2/DSMX Compatible Nano Indoor DIY Receiver with PWM & SBUS

Generating Links

OrangeRx R614XN DSM2/DSMX Compatible Nano Indoor DIY Receiver with PWM & SBUS

価格:

Now save 節約 ¥0.00 ¥0.00

¥1,738.88
数量:
出荷先:
  • EU
購入済み
現在の状況:
在庫あり
SKU:
9171001415-0
送料無料したい? クリックする こちらへ 詳細情報を参照する
This is the smallest OrangeRx receiver on the market at this moment, it measures an infinitesimal 11.7 x 11.7mm and is only 3mm thick and weighs just 0.5g before any wiring is added. This is a DIY receiver that requires the connections to be soldered directly to it, therefore saving the weight and bulk of connectors.

The R614XN is a full 6ch receiver, it has 6 PWM outputs for conventional use or a 8ch SBUS. It is compatible with DSM2 and DSMX 1024/2048 aircraft radio and module systems and has a built in smart failsafe with ultra-fast brownout recovery feature.

The smart failsafe feature is if the signal is lost for a period of less than a second all channels will hold their last command, if the loss of signal is longer than one second then the controls will go to the predetermined position which you have set (ie: closed throttle etc). The fast brownout recovery feature will recover from say a minor power loss or a brief signal with only a slight glitch being seen, recovery is almost instant.

Features:
• Compatible with DSM2/DSMX 1024/2048 aircraft and module systems
• Extremely small, only 11.7 x 11.7 x 3mm
• Very lightweight, only 0.5g without wiring
• 8ch SBUS, inverted UART, AETR, 22ms frame rate
• 6ch PWM outputs for conventional use
• Programmable smart failsafe
• Ultra fast brownout recovery system
• Wide input voltage, 3.7~9.6V

Specs:
Model: R614XN DSM2/DSMX Compatible Nano Indoor DIY Receiver with PWM & SBUS
Channels: 6 x PWM, 8 x SBUS
Input Voltage: 3.7~9.6V
Current Draw: 35mA
Dimensions: 11.7 x 11.7 x 3mm
Weight: 0.5g (without wires)

*Note:
1) This is not a Spektrum DSM2/X product, nor is it a copy of a Spektrum DSM2/X product. The Spektrum and DSM2/X brand is a trademark of Horizon Hobbies USA.
2) This is not an underground black market fake Spektrum product. OrangeRx quality is guaranteed.
3) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance

See under the "Files" tab for the instruction manual.
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

nano | 確認済みの購入者

  • Quality
  • Overall
  • Value

fllying of nano

Mar 23, 2022

i have flown this on several craft at 1000 foot range.
no glitches

Marc | 確認済みの購入者

  • Quality
  • Overall
  • Value

poor receiver

Dec 06, 2021

Rudder is moving with throttle input , doesn't like wifi signal !?
Is not linear

受取人 | 確認済みの購入者

  • Quality
  • Overall
  • Value

Good

Sep 10, 2021

Works good size

Nicolas | 確認済みの購入者

  • Quality
  • Overall
  • Value

Correct

Jun 24, 2021

Le premier récepteur était impossible à binder en DsmX.
Il bindait en Dsm2, mais la led restait clignotante, et la portée était très faible.
Remplacé en garantie, le nouveau ne bind toujours pas en DsmX, mais en Dsm2 il bind correctement, et la led devient fixe, avec une portée correcte.

fouras | 確認済みの購入者

  • Quality
  • Overall
  • Value

conforme a la commande

Jun 10, 2021

conforme

MIA | 確認済みの購入者

  • Quality
  • Overall
  • Value

Great Little RX Board for DIY Projects.

May 12, 2021

Great micro receiver board for DIY projects that require minimal weight. I ended up using gold plated PCB pin connectors on mine to make connections a bit easier at the expense of a bit more weight, but one can simply solder direct to the board pin locations. 6 channels is also a nice number to have if you need extra channels of control. I use 4 because I use these for Throttle, Rudder and Elevator on micro rc airplanes of own design with individual separate servos and esc.
It's stand alone design makes this an attractive device, but would also be nice to have same board incorporated with 2 servos and esc already as a single unit similar to those used in micro helicopters or airplanes for those who would rather not have to solder their own separate components to it. I would not remove this original one from the market as options is what makes it more attractive.
I am giving it 5 stars because under the conditions I just described it is a nice little board. I am going to bypass a little glitch I noticed that when connecting a servo to it it sometimes would not fully connect with it and it was intermittent, this could be due to a bad solder joint since I have swapped servos I have to suspect it is a poor solder joint or bad connection somewhere in the circuit. I only saw this with one of 2 boards I tried.
I really like the layout and compact size.
MIA

A | 確認済みの購入者

  • Quality
  • Overall
  • Value

A

Mar 13, 2021

Don’t know, havnttried it yet

olarf | 確認済みの購入者

  • Quality
  • Overall
  • Value

great little micro receiver just what i have been looking for ,for years

Mar 02, 2021

as i have already stated lovely little job perfect for micro r/c brilliant for the price.

elio | 確認済みの購入者

  • Quality
  • Overall
  • Value

r614xn

Jan 29, 2021

connesso con cc3d il segnale e' instabile e i motori non si controllano.

fern | 確認済みの購入者

  • Quality
  • Overall
  • Value

Good litle rx

Jan 17, 2021

You have to solder your servos wire to tiny tabs, need good soldering skills

  1. 1
  2. 2
顧客ファイル
R614XN Instruction Manual Download [237]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー