サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

P-51Dモンスターマスタング1.55メートル6CH XL-EPO - 61inch PNF(ブラック)

Generating Links

P-51Dモンスターマスタング1.55メートル6CH XL-EPO - 61inch PNF(ブラック)

価格:

Now save 節約 ¥0.00 ¥0.00

¥25,860.88
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
P-51B
送料無料したい? クリックする こちらへ 詳細情報を参照する

この大規模では、衝突耐性EPOの軍用機は61インチ(1.55メートル)のwingpsanがあり、作業が後退、機能的なテールホイールとフラップが付いています!
衝撃吸収後退は悪い着陸とラフ飛行場所からバンプを浴び、機能的で強いの両方です。操縦可能なテールホイールは簡単に​​タキシングと、この大きな翼幅面が空気中に制御することがさらに容易であることができます。
新しいEPO P-51Dともはや大規模な軍用機の飛行心配する必要はありません、

8サーボ、4ブレードプロペラ、および大規模な高品質の42シリーズアウトランナーも含まれています。フラップは遅い着陸のための短い離陸し、完璧を引き剥がすための素晴らしいです!
P-51マスタングの場所に接着するだけでテールピースと翼を残して、組み立てられた95%に到着します。組み立て時間は約1時間です。

スペック。
長さ:1350ミリメートル
翼幅:1550ミリメートル
プロペラ:4ブレード(付属)
重量:2300グラム
モーター:C4250ブラシレスアウトランナーの600kv(付属)
ESC:45A(付属)
バッテリー:14.8V 2600〜3000mAhの4S1P(含まれていません)
サーボ:8台(付属)
後退:3×電気が後退(付属)

必須;
6CHのTx&Rxの(エルロン/フラップ/エレベーター/ラダー/スロットル/ギア)
2600〜3000mAhの4S1Pリポ14.8V

  • P51D 1.55m Mustang
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

tony | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 29, 2014

well I think I bought the last one here in aus, , took a week to arrive, which I thought was really reasonable , plane arrived packaged well with no signs of damage, assembly took a little longer than I expected, but worth the effort , negative points... left landing gear was nowhere near in line and had to pack it out, plus they swivel and wont stay in a straight line, one elevator servo was dead on arrival so had to be replaced, also one elevator control rod was missing so had to make my own, main wings would not push all the way in to the fuse so had to make ajustments there, positives ... this is a really sturdy plane, solid as a rock, heaps of room inside the fuselage for your gear and battery, took just under a day to assemble which I thought was quite acceptable, on her maiden flight this arvo I found it easy to break ground and needed very little trimming to get her straight, a very dosile and predictable flight character, flaps work well for slow flight and landings, a beautiful scale flyer, not a speed machine but very enjoyable to fly,
its such a pity hk has ceased production of these planes, I would have liked another one , come on hk, bring them back please

tony | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Sep 22, 2014

was impressed with the packaging of this plane, double boxed as usal, everything arrived in good condition , it seems to be a very well made model, good solid epo .
one or two bad points tho, the landing gear has a tendancy to swivel, so keeping them in a straight line is difficult, but im sure a bit of lock tite can sort this, also in the tail section , one of the elevator control rods was missing, so had to fabricate and fit a new one, ok for someone in the know but would be difficult and very fiddly for someone who has never built planes before
overall tho this is a great model, its just a pity the main wings have to be glued on, making transport very difficult, im still looking into a way to make them removable to get it to my airfield easier .
would recommend this plane but as I hear they are not making anymore , I believe I got the last one in aus, its a real pity

jr2d3 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

I buy this plane, in the first flight the motor stops, fortunately I was able to land the plane whitout damage, only the ESC was buned out and was verry hot, i send a mail to
hobbyking now waiting what they tel me. i fly whit a Turnigy 4S3000 30C
thats in my opinion no problem

Keithy | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Aug 09, 2012

My lovely daughter bought me this for my birthday. I have assembled it with removable wings ( 4 bolts and 2 pieces of ply), which helps with transport. The ESC provided is hopelssly inadequate. After 6 minute flight, too hot to touch so ran on watt meter and found that static current draw is 45 Amps. Right on the limit of the ESC. Also, found that the model is under powered and flies very slowly but perhaps the ESC limited the power to the motor. When my new ESC comes, I'll see how it goes. I found the general finish on the model was below average and the rudder servo was faulty. I had to change that. One wing had been stressed in transit and was bowed. Some weight and hot air remedied this over a few hours. I gave it 4 crowns overall because when I flew it, it flew like a bird and had no vices. It has real presence both in the air and on the ground. The retracts and flaps work very well and the flaps do not make the model balloon. There is no tendency to tip stall, even at the lowest possible speed. This model fies so well that I reckon it could almost rate as a trainer. The really bad potential problem with this model is; if you use the C of G that is recommended, you just might prang on your first flight!!! Please, for your safety and the safety of your investment, make the C of G 95mm back from the wing root leading edge. If you don't like it there, you can move it back t

SJC31X | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Nov 15, 2011

Got it in -1- week. great looking plane, got the black and silver,

instructions are not the best, but went together fast.

"CHANGE THE CONTROL HORNS" they break very easy.

Have not flown it yet, Got to replace control horns, -2- broke on the building table.

"CHANGE THE CONTROL HORNS"

sjs41@cox.net | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Mar 01, 2011

Type your review here.

Try to include as much data as possible.

Great looking scale,easy build.Plane is heavy so before fixing contol horns change them- they break without flying.



顧客 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Feb 22, 2011

it is a slow flyer... with the stock motor and prop i do not think it is easy to go vertical... i got one of them.. and it is great looking... one drowback is its wings are fixed and not designed to be removed for easy carrieng to the site... so you need to have roomy car to carry it. and one more thing its prop is not yet found any where. if you loose it you have to fix another 2blades prop. it has good space for the battery i fixed 4S 3300mAh but i may use 4000mAh or more to enjoy longer flying time. my 1st landing i crashed the landing gear. but fixed it again and it is good now.

Warbirdmadman | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 18, 2010

This is not a bad plane but some things are not great. The paint is not good with some of the black shiny and some matt. Canopy has overspray, Ok if you are looking to repaint. Chips quite easily. One flap was damaged but still usable. Have tossed the motor and speedy as on 4S it would not go past 3/4 throttle without cutting out. Would be better sold with no motor or speedy and sold cheaper just as airframe. Hopefully will fly ok.

Dr.Tom_CRO | 確認済みの購入者

  • Overall
  • Quality
  • Value

Customer Rated

Oct 18, 2010

Look here for velcro fixation method and easy transport! Say no to GLUE.

link: http://tinyurl.com/mustangvelcro01



link to HK shop item velcro

http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9374

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!