サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

KS-サーボPDI-HV0903MGスリムウィングHV / BB / DS / MGサーボ2.6キロ/ 0.07sec / 9グラム

Generating Links

KS-サーボPDI-HV0903MGスリムウィングHV / BB / DS / MGサーボ2.6キロ/ 0.07sec / 9グラム

価格:

Now save 節約 ¥0.00 ¥0.00

¥2,398.42
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
458000009-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

KS-サーボPDI-HV0903MG、スリム羽、金属ギア、2.6キロ/ 0.07sec / 9グラム

これらのサーボが金属歯車とし、そのスリムなデザインと高品質が小さいグライダー、飛行機やヘリのためにそれらを完璧にしています。

特徴:
•優れたトルクと速度
•メタルギア
•ツインボールベアリング
小さなグライダー、飛行機やヘリのための•パーフェクトサーボ
•完全な実装ハードウェアパック

仕様:
モデル:PDI-HV0903MG
動作電圧:6V / 7.4V
動作電流:100ミリアンペア/ 190ミリアンペア
動作速度:0.09sec.60º/0.07sec.60º
ストールトルク:2kg.cm / 2.6kg.cm
デッドバンド:2usec
オペレーティング旅行:60º
ベアリング: デュアルボールベアリング
ギア材質: メタル
コネクタワイヤー:150ミリメートル
動作温度範囲:-20℃+ 60℃
スプライン数:15
サイズ:23.5 X 8.1 X 24.3ミリメートル
重量:9グラム

attributeset-11
Close

Dimension Diagram Guide

  • attributeset-11

Close

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Walt | 確認済みの購入者

  • Overall
  • Quality
  • Value

HVO903mg

Jan 25, 2020

Works as advertised--used to install flaps on Apprentice S

randy | 確認済みの購入者

  • Overall
  • Quality
  • Value

nice wing servo reasonable price

Dec 02, 2019

good alternative to hitec.Get 3 for the price of one hitec

Max | 確認済みの購入者

  • Overall
  • Quality
  • Value

small servo

Nov 25, 2019

This is a very small servo, is strong enough

Buy-N-Fly | 確認済みの購入者

  • Overall
  • Quality
  • Value

Strong servo for it's size

Oct 10, 2019

I installed 4 of these servos in an RCF Edge V3 39"wingspan foamy. The servos are very light and fast. If you need servos that put out over 2 kg of torque this servo is for you. An added bonus is they are below 10g each including wires and connector. There is a considerable amount of slop at center that is magnified when using long servo arms needed in 3d setups. This however doesn't detract from the accuracy when returning to neutral when powered up. It may be due to the tight 2us deadband at center. My aileron servos jittered at neutral but just tapping on the pushrods immediately stopped the jittering. I fabricated a slotted guide that put a little pressure on the pushrod at neutral that worked well and controlled the aileron jittering. I highly recommend this servo for HV set-ups just don't make the mistake of powering them with the full 3s voltage as you will fry your rx and all servos. I made an adapter that powered my receiver and servos through the lipo balancer tap only utilizing 2 cells of my 3s setup. An alternative would be to use a step-down voltage regulator to lower the 3s voltage to 7 to 8 volts.

Colin | 確認済みの購入者

  • Overall
  • Quality
  • Value

Eh

Jun 29, 2019

Works well, but it has the design flaw of not including strain relief for the wires coming out of the case. Had the wires pull straight off the PCB. It's easy to open it up and solder them back on, but I'd expect better from a pricey 9g servo.

Jeff | 確認済みの購入者

  • Overall
  • Quality
  • Value

I bought 2 of these, one worked fine, the other didn’t work at all, checked the servo and found that the black wire was not connected. Planning to send it back,

May 27, 2019

Black wire was not connected

Walt | 確認済みの購入者

  • Overall
  • Quality
  • Value

Wing Servos

Apr 21, 2019

Excellent wing servos for narrow profile wings

ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!