サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

HobbyKing 3Dプリンタフィラメント1.75ミリメートルPETG 1.0キロスプール(ブラック)

Generating Links

HobbyKing 3Dプリンタフィラメント1.75ミリメートルPETG 1.0キロスプール(ブラック)

価格:

Now save 節約 ¥0.00 ¥0.00

¥3,778.43
購入済み Discontinued Product

Please continue searching for a similar product.
SKU:
741000063-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

HobbyKing 3Dプリンタフィラメント1.75ミリメートルPETG 1.0キロスプール( ブラック

HobbyKingは、あなたが一日と一晩を印刷する必要があります価格で3Dプリンタのフィラメントの巨大な新しい範囲で出てきました。

範囲は、PLA、ABS、柔軟、変色、ルミナス、ナイロン、ポリカーボネート、アセタール(POM)、メタ​​ルコンポジットおよび印刷金型のためであっても、水溶性フィラメントをカバーしています。だから、あなたは心を持っているすべてのプロジェクトのためのフィラメントがあります。 HobbyKingフィラメントは、安定した融点、良好な丸い形と一貫性の流量のための最も重要なのは0.01ミリメートル均一な直径の公差を持っています。

PETG:

PETGは、高い引張強度、耐衝撃性を有し、PLAよりも耐久性があります。また、室内で簡単にプリントすることができます何の臭いを持っていません。これは、ワープ、より良い環境のためにそれを作るリサイクル可能ですされません。新たな光プラスチック。

3Dプリントは、子供のためのおもちゃを作ることに部品の試作から用途の広い範囲で楽しくてエキサイティングな趣味です。あなたのアプリケーションに適したフィラメントを選ぶことは非常に重要です。

特徴:
•安定した融点
•グッド丸い形状
•均一な直径の公差0.01ミリメートル
•一貫性のある色

仕様:
フィラメント材質:PETG
融点:250℃
印刷温度:250〜275°C
フィラメント直径:1.75ミリメートル
数量:1.0キロ
カラー: ブラック

動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

charles | 確認済みの購入者

  • Overall
  • Quality
  • Value

Consistent quality, inconsistent delivery.

Dec 27, 2019

A decent quality filament and it seems good across the range of colours in petg. I'm looking for consistency in filament, I don't want to have to change my print setup each time I run out. I want to know how much it will cost and when it will get there.
This is where Hobbyking falls down, as delivery can be random at best, postage costs trebbled between orders. So I looked elsewhere and found the filament I need. It prints better at a lower temp and just as importantly, it is with me on time and at the same price each time.
Filament quality is getting better all the time, good service is still just as hard to find.

Not BED | 確認済みの購入者

  • Overall
  • Quality
  • Value

Not so bed filament

Nov 30, 2019

It good filament for may likeing.

skyfox60 | 確認済みの購入者

  • Overall
  • Quality
  • Value

perfect

Nov 17, 2019

Perfect, giving goos results.
Recommended

D | 確認済みの購入者

  • Overall
  • Quality
  • Value

Works very well

Nov 06, 2019

Works very well

rx | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great nylon value

Nov 01, 2019

Works great out of the package ***BUT*** it NEEDS to be dried if you leave it out. If you don't , it will absorb water and the layers won't stick well.

Bludgutz | 確認済みの購入者

  • Overall
  • Quality
  • Value

PETG FILAMENT

Aug 29, 2019

This filament is great to print with at 250 degrees and comes out shiny with minimal stringing.

Vikas | 確認済みの購入者

  • Overall
  • Quality
  • Value

okay, if you can dry it

Jan 27, 2019

Bit shocked when I tried the PETG , I had the worst kind of bubbles and pops and crap extrusion that comes with filament which is holding way too much moisture. The bags themselves do seem to be sealed, I can only assume it was wrapped up in this state.
Overnight dry in a dehydrator (55degC , 9 hrs in this case) seems to have cured it and the material is printing well now. Had I not had that facility already, this would be hard to turnaround and make usable - never had any issues with any suppliers other than HK shipping filament that needs drying before use, and contains as much moisture. Tax killed the value statement shipping to UK (even with 10KG ordered to get the free shipping. QC is clearly lacking. Most likely I will stick with local suppliers in future.

Ferdinando | 確認済みの購入者

  • Overall
  • Quality
  • Value

IMHO

Dec 26, 2018

The filament is very good.
The diameter is constant.
I'm not very expert but I think the print temperature is too high. I get good results at 225 ° 45mm/sec, 70° Bed.
Unfortunately the coil is wrapped very badly :-(

Ilkka | 確認済みの購入者

  • Overall
  • Quality
  • Value

GOOD PETG

Jul 15, 2018

Wery good filament.
Surface of filament is so smooth that Prusa MK3 filament sensor gives random runouts...
Turn sensor off and this will do nice quality prints.

Stanislav | 確認済みの購入者

  • Overall
  • Quality
  • Value

OK

Jul 02, 2018

It works but expected better strenght it behaves like PLA

  1. 1
  2. 2
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!