新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録
Shipped From:
  • Global
  • USA

ピコPT-17(株式会社モーター/ ESC /サーボ)310ミリメートル(ARF)

ピコPT-17(株式会社モーター/ ESC /サーボ)310ミリメートル(ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
328 g
SKU:
PICO
商品概要

このスーパータフEPPプロファイルPT-17は、ブラシ付きモーター/ギアボックスアセンブリとリニアサーボのに付属しています屋内モデルを構築楽しいです。アセンブリは、高速かつシンプル&すべてのハードウェアが含まれているだけでなく、カラー写真の命令リーフレットです。あなたが完了するために、マイクロJSTコネクタと1 Lipolyバッテリーと互換性の超軽量のレシーバが必要になります。

仕様:
翼幅:310ミリメートル
長さ:275ミリメートル
フライング重量:18グラム
モーター:EPS6
ESC:3Aブラッシュ
サーボ: リニアマイクロ

含まれています:
すべてのハードウェア
プロペラ
説明書

必要なもの:
マイクロJST互換性RXを使用して独自の3チャンネルTX
100mAh〜140mAh 1S Lipolyバッテリー

Product
Specifications

追加情報

  • 単位:
    PICO
  • Brand:
    N/A
  • 重量(g )
    328.00
  • 長さ
    340.00
  • Width:
    60.00
  • 高さ:
    100.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The original brushed motor is to weak. But if you install a AP-02 motor, driven by the HK030 ESC and use the GWS3020 propeller you get plenty of power and have a really nice flying model.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
free 3d plane good condition I love it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great plane. Mine didn't seem to have enough power with the stock motor to do more than climb very slowly, despite me trying to keep the weight down. Tried a few different props with no improvement. Also, there is no motor mount for the included motor. I took the old motor off, and put some CF strips down the sides of the plane to make it stronger, reinforce the nose, etc. I then replaced the motor with a 3.6g 1200kv brushless motor, and put a 5045 (I think) prop on it - this works REALLY well. Not quite vertical, but it is extremely quiet (noiseless really) and is stone cold after a 10 minute flight. I expect to be able to do vertical climbs once I put a prop on with slightly more pitch. The CF strips down the sides are a good idea as otherwise you will easily break the foam nose of the plane where the motor mounts if you have a hard crash. With the CF, its pretty much rock solid. AUW incl battery (nanotech 130mah) is 34g.
This is a great plane for the price. I've bought another one which I might try to put ailerons on.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got one as a free item, not flown yet. All items included and comes in a nice box. This is the cheapest PNF plane in HK! :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Okay, finally got this gift plane to fly, I found there was not enough power to keep it in the air. I substituted the supplied prop with a slightly bigger GWS EP4530 propeller - now she stays in the air! also tie the motor part of the power drive directly to the carbon fibre rod, use kevlar thread and 'THICK' CA (otherwise thin will go into the motor).
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As others - AWU 24g with Turnigy 130 mAh battery - flies about 10 yards slowly sinking all the time -what a pity as goes together well and looks nice.

Nanotec 30c 1s batteries no better.

Always check the servo leads - mine too were reversed but easy to lift retaining tabs, slide out the pins and put them back in the correct slots - then 'dead' servos will work fine.

Anyone tried a different prop or motor setup?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This plane goes together nicely, as the parts have slots and tabs to make them fit precisely. Make sure you keep the weight as far forward as possible, as this plane tends to be tail-heavy. The control surface hinging is tape, so you should plan to add a bit of reinforcement tape on the opposite side, and make sure the sticky tape surfaces come together to form a good hinge.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。