サプライヤーになる ブログ 新しいアイテム
新規登録

合計金額

¥0.00

ショッピングカート 0 ショッピングカート 0 Loading...

ホビーキングパイパーJ-3カブバルサウッドラジオコントロールレーザーカット飛行機キット1800mm / 70 "(電気または内燃用)

Generating Links

ホビーキングパイパーJ-3カブバルサウッドラジオコントロールレーザーカット飛行機キット1800mm / 70 "(電気または内燃用)

価格:

Now save 節約 ¥0.00 ¥0.00

¥17,709.22
現在の状況:
在庫切れ!
SKU:
9099000089-0
送料無料したい? クリックする こちらへ 詳細情報を参照する

泡模型飛行機は早く飛ばしたいという方に最適ですが、しばらくするとすべて同じように飛んで組み立てられる傾向があり、ある程度の達成感が欠けていると言えます。だから、パーツのキットからあなた自身のモデルを構築し、それをあなた自身のユニークな配色で覆い、そしてそれが初めてうまく飛ぶのを見るというスリルと満足感を体験してみませんか。


ホビーキングは、さまざまなレーザーカットキットを使用して、これをはるかに簡単にしました。組み立てを簡単にするために、すべての木製パーツが美しくレーザーカットされているため、完璧なモデルを作成できます。レーザー切断は非常に正確であるため、パーツは非常にぴったりとはまり、ジョイントの周りに適切なCA接着剤を塗布している間、パーツを所定の位置に保持できます。


このキットの主題は、人気のあるアメリカの軽飛行機、パイパーJ-3カブです。パイパー航空機会社はカブを大量に製造し、そのシンプルさ、頑丈さ、手頃な価格、そして優れた飛行特性により、人気を博しました。大きな翼はそれが非常にゆっくりと飛ぶことを可能にし、その穏やかな取り扱いはそれを優れたトレーナーにしました。今日でも多くの例が飛んでおり、第二次世界大戦中のすべての戦域で、救急車やオブザーバーまたはスポッター機として卓越した経歴を持って使用されました。これらの1つは、ヨーロッパでの空中戦で最後の航空機でした。そのため、建設が完了すると、軍用でも民間用でも、さまざまな配色でモデルを仕上げることができます。もちろん、クラシックなパイパーカブイエローが人気のある選択肢です。


このキットは、オリジナルのホビーキングパイパーJ-3のアップデートバージョンです。元のバージョンからの改善点は次のとおりです。合理化された翼支柱、改良された下部構造アセンブリ、改良されたプッシュロッドシステム、強度を高めるための3層水平尾翼構造、グラスファイバーファイアウォール、内燃バージョン用のテールマウントサーボ、改良されたバッテリー/燃料タンクアクセス、および追加されたスケールの詳細。このモデルは、フルサイズの航空機と同じように頑丈で軽量なフレームワーク構造を備えたパイパーカブの本質を捉えていますが、バルサと広葉樹で作られ、成形プラスチックカウルとフロントガラスが含まれています。また、一対のスケール航空機ホイール、カーボンチューブウィングスパー、ジョイナーに加えて、ナット、ボルト、コントロールホーン、ロッド、コネクタなどを含む包括的なハードウェアパックも提供されます。


パイパーJ-3カブは、500〜600ワットの出力を備えた35〜42ミリメートルのブラシレスアウトランナーモーターまたは同等のガス/ニトロエンジンのいずれかを使用するように設計されています。フルサイズまたはモデルにフラップが取り付けられていないため、必要なのは4/5サーボを備えた4チャンネルラジオだけです。これにより、素晴らしくシンプルになります。


全体的に、これは素晴らしいキットであり、その構築の容易さのために、それはベテランのビルダーまたは限られた建築経験を持つ人々に最適です。本格的な配色に仕上げ、パイロットやインストルメントパネルなどのスケールアクセサリーを追加すると、このスケールのように見えるパイパーカブは、地元の飛行場で怠惰な曲技飛行や低速で低速のパスを実行するときに、パーツを見て頭を回転させます。


特徴:
•正確さと構造の容易さのためのレーザーカット部品
•グラスファイバーファイアウォール
•カーボンスパーとウィングチューブ
•成形プラスチックカウルとグレージング
•バネ仕掛けの機能的な着陸装置
•本物の合理化されたウィングストラット
•包括的なハードウェアパック


仕様:
翼幅:1800mm(70")
胴体の長さ:1150mm(45")
飛行重量:約2.8kg(選択したパワートレインによって異なります)
モーター:3520〜4250(500〜600ワット)ブラシレスアウトランナーモーターまたはガス/ニトロ相当
ESC:最大6SのLiPoバッテリーに適した60〜80A
プロペラ:選択したパワートレインに応じて11"以上
バッテリー:3000〜6000mah 4〜6SLiPoバッテリー


必須(電気バージョン):
3520〜4250(500〜600ワット)ブラシレスアウトランナーモーターまたはガス/ニトロ相当
60〜80A 6S ESC with BEC
または
60〜80AESCオプト+ BECシステム
11"プロペラ以上
3000〜6000mah 4〜6SLiPoバッテリー


必須(内燃バージョン):
46〜552ストロークグロープラグタイプ
60〜704ストロークグロープラグタイプ
9cc〜10ccガスタイプ
適したプロペラ
燃料タンクと配管
オン/オフスイッチ付きレシーバーバッテリー


必須(両方のバージョン):
カバー材
各種接着剤
各種ハンドツール
2 x 37〜45g標準サイズサーボ(ガス/ニトロエンジンを使用する場合は3つ必要)
エルロン用の2xマイクロ/ミニサーボ(必要に応じて、標準サイズのサーボ用の十分なスペースがあります)
最小4ch送信機と受信機


注意:[ファイル]タブの下に構築マニュアルのコピーがあります。

  • IC / 2 :エレック Electric
  • モータサイズ( DIAM -または-CC ) 35.00
  • 翼幅(ミリメートル) 1800.00
  • Length(mm) 1150.00
動画をアップロードする

動画をアップロードするには登録してください サインイン または 新規登録

トピック
並び替え
最新のトピック
* ニックネーム:

* あなたの返信:


下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
キャンセル
提出する
新しいトピックを投稿する
* ニックネーム:

* あなたのトピック:



下のフィールドに画像に表示されているテキストを入力してください
*検証コード:
投稿トピック

レビューを書くために登録してください サインイン または 新規登録

Steve | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great Flying Cub

Oct 27, 2022

The build wasn't too complicated. Just pay attention to the instruction pictures. You don't get a true manual, but just a book of pictures. My only real complaint is the kit does not provide a way to properly secure your wings to the fuselage. I didn't realize it until I closed the wing up. I improvised and used hooks and rubber bands. Blind nuts would be the way to go.
Flying this plane is an absolute joy. It doesn't seem to have any bad tendencies. Here is what my setup is:
Badass 3520-790KV Motor
Badass Rebel 65 Amp ESC
APC - 12x6 prop
Ovonic 4S 3400 Lipo
Spektrum AR631 Receiver
I have the maiden flight on Youtube if you want to see how it flies.
https://youtube.com/watch?v=Zw2H09RbSnE&feature=share&utm_source=EKLEiJECCKjOmKnC5IiRIQ

Nice | 確認済みの購入者

  • Overall
  • Quality
  • Value

Great kit

Feb 26, 2022

Some of the parts are left over because there was no explanation to where they go. But they aren't an integral part so no big deal. I would add a wood leading edge to sand round to make it easier to have a leading edge. The little screws to hold the windows on weren't long enough to go through the airframe to hold the windows on so I had to put the windows on on the outside instead of the inside. Other than that this kit is a very nice kit. Especially for the price point.
My only suggestion would be to make the window screws about a 1/16th inch longer to hold the windows. Also for the main wheels to add a washer or spacer on the inside of the wheel due to if you tighten the nuts it'll pinch the wheel and keep it from freely spinning resulting in nose overs on landing and take off. I haven't flown it yet but will here shortly.
All in all besides what I suggested this kit is a very nice kit and would totally recommend it to anyone.

Cyclone7 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Good Value Overall

Dec 19, 2021

All in all, not a bad kit at all. The quality of the laser cutting is very good indeed although some of the design needs improvement; especially with regard to the undercarriage and wing struts. The instruction manual is not good at all and I would not recommend this kit to anyone who does not have prior kit building experience. The kit went together well enough but only because I was able to anticipate certain construction steps and considerations. The very un-scale like cowling is another area that requires attention - the ridiculous airflow cut out makes it look like a computer generated 'smilie'.
I cannot understand why these manufacturers struggle so much with providing understandable, well written manuals!

Vicar | 確認済みの購入者

  • Overall
  • Quality
  • Value

J3 Cub

Nov 22, 2021

Great kit. Thanks

Alby | 確認済みの購入者

  • Overall
  • Quality
  • Value

ottimo,spedizione veloce e prezzo competitivo

Nov 02, 2021

nel complesso soddisfacente,sarebbe del tutto soddisfacente se le spiegazioni per la costruzione fossero più dettagliate.

Stephen | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very Good Value

Oct 30, 2021

I have just received my V2 kit via DHL - ordered 24/10 and received today 29/10 which I think is good going by HK/DHL (Hong Kong to the UK), under the present circumstances. Kit arrived well packaged and undamaged(and most importantly, well labelled 'Fragile - Do Not Accept Delivery If Damaged') . After a cursory examination of the contents and the laser cut parts, I am very impressed by the quality which seems to represent very good value for money. Looking forward to the build and certain modifications to the design, that I have in mind.

Stephen | 確認済みの購入者

  • Overall
  • Quality
  • Value

Very Good Value

Oct 30, 2021

I have just received my V2 kit via DHL - ordered 24/10 and received today 29/10 which I think is good going by HK/DHL (Hong Kong to the UK), under the present circumstances. Kit arrived well packaged and undamaged(and most importantly, well labelled 'Fragile - Do Not Accept Delivery If Damaged') . After a cursory examination of the contents and the laser cut parts, I am very impressed by the quality which seems to represent very good value for money. Looking forward to the build and certain modifications to the design, that I have in mind.

Dougie | 確認済みの購入者

  • Overall
  • Quality
  • Value

Exceptional kit from HK

Oct 28, 2021

I am currently building the V2 kit. Judging by online reviews and build videos of the original version I cam say that there appears to have been a number of tweaks and improvements to the latest version. Including a more scale like door, all be it half the scale length due to structural restrictions, and decent wing servo ply mounts are now provided for a more conventional servo instillation, i.e. laying on the side with just the horn protruding through the mount plate. I'm finding it a fairly simple straight forward build, and have completed most of the structural work within two weeks. That said, it is still not a model for a first time builder, the instructions are more guide notes, and assume you have some plan building experience in hand already. I consider myself a reasonably experienced plan builder, but I too have been caught out coming across the odd part not mentioned anywhere in the photo illustrations whilst searching through the bits for something else! If you are expecting a 'Glue part A to part B' sort of instruction book, then this is definitely not that. The pictures are fairly adequate to see most of the parts, but you will need to be capable of deciding on a build sequence yourself. I only mention all this because I have seen several reviews complaining of woefully inadequate instructions. But if you are confident you can build from a wing plan and a set of photos, then this kit is truly amazing value for money! The laser cutting is nothing short of remarkable! Every part fits perfectly. They have even laser cut hinge slots in to the wing trailing edge for you! I have had to do very little fettling at all so far, other than cleaning the charcoal of the edges of the parts, which is a given with any laser cut parts anyway. I really am blown away by the quality of this kit, and it really is a complete kit too, even if you may wish to change some of the hardware supplied for some items of personal choice. I really can't speak highly enough of what you get here for your money. I can't wait for the Eindecker to come back in stock so I can give that laser cut kit a bash too! Full 5 stars from me!

Lanerover | 確認済みの購入者

  • Overall
  • Quality
  • Value

1.8 cub

Sep 19, 2021

Excellent kit however I gave up on the 100+ tiny screws for the windows on the top surface and resorted to covering the windows over, I also found it impossible to get the side windows to lay flat ended up fitting them to the outer surface of the plane.

Gasman3 | 確認済みの購入者

  • Overall
  • Quality
  • Value

Not at all impressed with this Kit!

Jul 30, 2021

I have been building and flying model aircraft since I was 11 years old. I am now 68 years old and I like to think, rather well versed in the hobby. I have built and flown most types of aircraft. For the past two or three years I have been very seriously into helicopters and drones of all sizes.
I have recently seen on the market a very good looking MIG 29. The kit is by Freewing (I think). It is powered by 2 x Gas Turbine Jets. I have never flown jet turbine models and felt that as I needed to get back into flying fixed wing aircraft. The J3 Cub would be a good way to begin fixed wing flying again.
I do know that the Cub has good all round characteristics, for both slow flight building up to a faster speed. I could then progress on to an electric powered trainer jet then the MIG 29. I really feel that this is the right way to proceed and therefore purchased your Piper J3 Cub.
You will of course know that I have purchased many aircraft from Hobbyking.com and up until this latest purchase I have been very happy with the quality. This J3 Cub however, is the really bottom end when you talk about quality. I do not think I will be purchasing any further kits from you if this is the standard to which they have dropped. The money I have spent putting things right is unbelievable. I am really sorry that it has come to this, but I am not happy.

  1. 1
  2. 2
  3. 3
  4. 4
顧客ファイル
H-King J-3 Cub Building Manual Download [3]
Dashboard for J3 Download [5]
IMG_20200509_123204.jpg Download [2]
Finished Cub With 2 stroke engine Download [148]
Post Maiden Pic Download [1]
Cub right back.jpg Download [2]
Cub right front.jpg Download [3]
Cub right.jpg Download [2]
ファイルをアップロードする

ファイルをアップロードするには登録してください.
お願いします サインイン または 新規登録 今すぐ愛好家を助け始めましょう!

アクセサリー