新規登録

Product Finder

設定

Useful links

ライブチャット
 
[["US","AU","GB","DE"]]
新規登録

パイパーL-4バッタ2350ミリメートル(ARF)

パイパーL-4バッタ2350ミリメートル(ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
重量:
7100 g
SKU:
Piper L-4

Combine

essential items and
esc
servo
motor
acc
商品概要

L-4は、J-3カブの軍事バージョンだった、パイパーはミリタリースペックへの変換は、いくつかの緑の塗料よりもより困難ではなかったことを言いました!砲撃方向、フロントラインのリエゾン、グライダーパイロットの指示に使用され、宅配便の面として、L-4は、軍事形で総成功だったといえるであろうが、L-4はまたに参加することの区別を持っていますそれはFieslerシュトルヒとピストルの戦いに関与していたWW2(ETO)の最後の空中戦!

この見事に構築されたARFは、20CCガスエンジンに合ったし、もちろん、周りの1.20輝きを受け入れるだろう、それはまた、6Sパワートレインの最小値を必要とする、簡単電変換だろう。スケールカラースキームはオリエンテーションのための理想的な侵略ストライプを、特徴とし、またの誇りになるこのモデルを行います多くのスケールの詳細がありますが、それらはようにアンダーキャリッジ、スケールの談合や支柱、真空形成された窓や作業、フルスケールを含みます。実用性のために、一つの扉がヒンジ結合され、磁石で固定し、2PC取り外し可能な翼は、輸送の同期を行います。

スペック。
材質: プリ覆われたバルサ/プライ
ウイングスパン:2350ミリメートル(92.51 ")
長さ:1500ミリメートル
フライング重量:5100グラム〜5200グラム
翼面積:77dm2
ウィング翼:4412 NACA
ウイングロード:66〜68 DM2

含まれています:
すべてのハードウェア

必須:
独自の5チャネルTX&RX
7標準サイズのサーボ
20CCガスエンジン

注:この面の大きさと重さに、それはすべての国に出荷するためには使用できません原因。しかし、このモデルは、現在、当社の米国の倉庫から購入することができ、すぐに私たちのDEとAUS倉庫から利用できるようになります。

Product
Specifications

追加情報

  • 単位:
    Piper L-4
  • Brand:
    いいえ
  • 容量(mAh )
    いいえ
  • 重量(g )
    7100.00
  • 長さ:
    1290.00
  • Width:
    340.00
  • 高さ
    375.00
Community
Discussions
Rate&
Review

あなたのレビューを投稿する

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Received mine Oct13/2016 Perfect packing job! Double boxed with tons of air pillows.
The box was crushed at one end but the packaging saved the plane. The finish is great. My dad loves it (birthday present to him) But we both agreed that the landing gear metal looks great...but is VERY heavy and perhaps will be changed for something much lighter(Im talking about almost 1 kilo!) Going to be putting a 26cc in this one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hallo,

die L4 ist ein gelungenes Modell, wenn man ein paar gravierende Dinge ändert. Zum einen passt die Befestigung des Fahrwerks am Rumpf nicht. Hier muss man mit einer Flex und einem Schweißgerät arbeiten. Für die Federung des Fahrwerks hat sich der Beilegende Gummi nicht bewährt. Hier sollte man 6 mm breite Streifen von einem alten Fahrradschlauch verwenden.
Des weiteren ist die Folie im Bereich Cockpit nicht richtig fest hier muss man sorgfältig nach bügeln. Am besten man nutzt zusätzlich Oracover https://www.oracover.de/index.php/katalog/artikelinfo/67-1-show-oracover_air_kleber_100_ml.html
Die Folie selbst ist in Ordnung.
Ein weiteres Problem ist die Befestigung der Cockpittüren. Ich habe Panzertape genommen, aber richtig glücklich bin ich damit auch noch nicht.


verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
bonjour,
je post mon deuxième commentaire sur mon piper je suis très satisfait de mon achat, j'ai décidé de le réentoiler au solartex vert et gris j'ai fais refaire les bandes lettrages et cocardes. voici le lien de ma video le setup est indiqué. https://www.youtube.com/watch?v=UJjw4x45MlA&feature=share
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My first comment has to be the poor quality of the landing gear, the mounting on the plane are 112.5 mm apart and the left hand mounting on the landing gear is 102 mm, the right hand is 100 mm. I've had to cut off the brackets and weld in the correct position. The inserts for the wing struts were missing from the hardware. The covering seems to tear with the slightest amount of pressure. There are no instructions included with the plane, although they are in the files tab, but the plane has been upgraded since the files were put up. the upgrades are to rectify complaints about build and quality control issues but they still seem to have further improvements to make. A nice looking plane and stable flyer let down by QC issues
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
notre piper L4 vol trs bien notre setup
NTM 4258 500KV 1300w esc 80 AMP hlice turnigy ultra light wood 15x8 accus lipo 6s 5000mah, CG 106mm impratif notice fausse pour 98mm CG 106 110 parfait.
autonomie 20 min de vol.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall




Hello,
I bought two kits Piper L4 good qualiit except stabilizer that will be repeated this winter, all very correct, careful guy fixing it are functional, ours are equipped with an electric motor.
here's our setup :
NTM 4258 500KV motor 1300W
Turnigy ultralight wood propeller 15x8 batteries lipo 6s 5000mah 40C
zippy flghtmax
weight 5kg flight orde .
CG imperative still 106mm without problem a little bit back 1cm .
Flight time 20 min lot of power. HK thank you a beautiful airplane that flies beautifully. EXPO differential
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
To be honest - this plane is a complete fail! Mine needs a complete rebuild and new covering, there are so much issues that they would fill some sides to write them all down. The worst issues are a wrong designed fuselage former at the rear causing the elevator pushrods to move very hard. The door has a really bad fit, you could throw a newspaper between fuselage and upper door. The covering is flimsy and very sensitive. The wooden plate for mounting the servos is bad quality, it`s impossible to screw down a servo there without some reinforcements. I need new covering film, Solartex, and a new set of decals. Purchsing Solartex and making new decals will raise the price of this plane to nearly 400 bucks. I wanted to fly it this year, but now i put it away as a winter project. If i only had choosen the 1400mm EPO version... but i wanted the big one, now i have the big work with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The model looks nice and flashy, robust easy to build; has the disadvantage of having a coating shrink poor quality, you have to be very careful not to damage during construction. The termoretribile repairing difficult because the green color is obtained by painting. The weight of the model is 5800 g-powered OS 120 four-stroke.
In September I will carry out the flight tests.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall








Hello,

I received my Piper L4 it is very beautiful well protected just a small defect on the bonnet but underneath so it is not seen .

it y ' flaw painting has been better able to be made on the connector body are on top but for the price we just not too much to say , I'll redo the black and white stripes on the wing and fuselage .

on the whole kit is good .

thank you HK 5 crowns. I offered to my father for his birthday now

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
commande pass le 10/04/15 reu le 16/04/15
trs bien emball, trs belle finition, inventaire il manque rien, trs satisfait.
rien de cass.
cadeau pour l'anniversaire de mon pre, le piper L4 est tellement beau je vais acheter un deuxime pour moi.
bravo HK
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

顧客ファイル
Manual download now [2611kb]
Manual download now [2611kb]
Photo. download now [201kb]
Piper download now [3919kb]
Manual download now [2611kb]
No File Name download now [2611kb]
. download now [1977kb]
Manual Piper L 4 download now [2611kb]

Combine

essential items and
esc
servo
motor
acc

商品のタグ

タグを区切るには空白を使って下さい。タグがフレーズの場合は、「'」で囲って下さい。