スピード（秒/ 60deg ）
Unit Weight (g):
（ MM ）:
B （ mm）と
C （ mm）と
D （ mm）と:
E （ mm）と:
F （ mm）と
GREAT FOR SMALLER MODELS, HAD A FEW GO BAD RUNNING 6V, BUT THEY ARE CHEAP SO ALL IN ALL OKVery bad quality.
Was using this servo as throttle servo for my Trex700N DFC with OS105HZR. Failed after 5 flights, locking my throttle at half stick. Had to fly until empty tank. Very scary 6 minutes.
Inspection of the servo showed that BOTH cables from pcb to servo motor had come loose. The wires failed, not the soldering.
Will never buy cheap servos for expensive models again, not even for throttle..I have used two of these servos in my Victoria Class RC yacht for almost 12 months and had no problems at all. They are a bit weak at 5.8kg/cm for the sail winch but that has only been a problem in strong winds. Other than that they have performed flawlessly.High quality , a little noisy but i don't mind.Smooth and strong servo. Special thanks for additional arm with 2 holes - really helps to connect extender or gimbal.Nice servos use for y650 camera gimbals A plusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusplusAAAThis is my second order of these very good servos. Delivery time was more than reasonable. Where I need standard analogue servos, this would be my product.Este servo lo estoy usando en un stick de 1,7 m con motor asp .61, esta en los alerones y elevador, ningn problema pero hago una observacin: consume un poco ms que un servo similar futaba 3003/4 y como instal un pack de LiFe p/rx no hay inconvenientes.Good servo but no parts stocked and company and hobby shops do not respond. I need a set of gears, I would like nylon/plastic but will also accept metal gears. Right now I have a useless servo and seemingly no way to repair it.High Quality Servos.
Using them on a 60 size Warbird with 91 Four stroke. The little vibration of the engine does not effects these servos.
I v been using them for 1 year. So far they are good servos.